OUTDOOR MATTING AGENT HM3329

Outdoor Matting Agent HM3329 creates a smooth semi-matte finish in polyester/TGIC outdoor powder coating systems.
Outdoor Matting Agent HM3329 helps control gloss between medium and low levels while keeping the coating surface clean and uniform.
Outdoor Matting Agent HM3329 is useful for outdoor durable coatings that need stable matting performance, good yellowing resistance, and a refined final appearance.

Synonyms: Outdoor Matting Agent HM3329, HM3329, HM 3329, HM3329 Outdoor Matting Additive, HM3329 Powder Coating Matting Agent, HM3329 Non-Reactive Matting Agent, Outdoor Powder Coating Matting Agent, Polyester/TGIC Matting Agent, Semi-Matte Powder Coating Additive

Outdoor Matting Agent HM3329 is a non-reacting matting agent specially developed for polyester/TGIC type outdoor durable powder coating to provide 30%-70% gloss and smooth matting surface.
Outdoor Matting Agent HM3329 is also applicable to produce other types of powder coatings with semi-matt gloss.

Outdoor Matting Agent HM3329 acts as a matting agent.
Outdoor Matting Agent HM3329 provides gloss and smooth matting surface.

Outdoor Matting Agent HM3329 is used in polyester/TGIC outdoor durable powder coating.
Outdoor Matting Agent HM3329 recommended dosage is maximum 4% of total weight.

Application and Pertormance of Outdoor Matting Agent HM3329:
Outdoor Matting Agent HM3329 can be applied in polyester/TGIC powder coating to achieve gloss level ranging from 30%-70% with excellent leveling effect and stable comprehensive properties.
When Outdoor Matting Agent HM3329 is used in other powder coating system, it can provide semi-matt non-yellowing coating with good film apperance.
Outdoor Matting Agent HM3329 is wax contained matting agent, and its dosage shall not exceed 4% by weight of total formulation, otherwise it will lead the powder coating to be worse in flowing effect, sticky, lumped, even block spray gun.

Stability and Reactivity of Outdoor Matting Agent HM3329:

Chemical stability:
Outdoor Matting Agent HM3329 is stable under normal dry storage and handling conditions.

Reactivity:
Outdoor Matting Agent HM3329 is a non-reactive matting agent and is not expected to show hazardous reactivity under normal use.

Conditions to avoid:
Heat, open flames, sparks, moisture, dust formation, static discharge, and poor ventilation should be avoided.

Incompatible materials:
Strong oxidizing agents, strong acids, strong bases, and highly reactive chemicals should be avoided.

Hazardous decomposition products:
Fire or thermal decomposition may produce carbon oxides, irritating smoke, and organic vapors.

Handling and Storage of Outdoor Matting Agent HM3329:

Handling:
Handle in a well-ventilated area.
Avoid breathing dust.
Avoid contact with skin, eyes, and clothing.
Use suitable protective equipment during weighing, mixing, and formulation.

Storage:
Store tightly closed in a cool, dry, and well-ventilated place.
Keep away from heat, moisture, ignition sources, direct sunlight, and incompatible materials.

First Aid Measures of Outdoor Matting Agent HM3329:

Inhalation:
Move the person to fresh air.
Seek medical advice if irritation or breathing difficulty continues.

Skin contact:
Wash with soap and plenty of water.
Remove contaminated clothing if necessary.

Eye contact:
Rinse carefully with water for at least 15 minutes.
Seek medical attention if irritation continues.

Ingestion:
Rinse mouth with water.
Do not induce vomiting unless directed by medical personnel.
Seek medical advice if discomfort occurs.

Firefighting Measures of Outdoor Matting Agent HM3329:

Suitable extinguishing media:
Use water spray, foam, dry chemical powder, or carbon dioxide.

Special hazards:
Fire may produce irritating fumes, carbon oxides, and organic decomposition products.

Protective equipment:
Firefighters should wear self-contained breathing apparatus and full protective clothing.

Accidental Release Measures of Outdoor Matting Agent HM3329:

Personal precautions:
Avoid dust inhalation and contact with skin or eyes.
Use gloves, goggles, and dust protection.

Environmental precautions:
Prevent release into drains, soil, groundwater, and waterways.

Cleaning method:
Sweep or vacuum carefully without creating dust.
Collect spilled material into suitable closed containers for disposal.

Exposure Controls / Personal Protection of Outdoor Matting Agent HM3329:

Engineering controls:
Use adequate ventilation or local exhaust ventilation.

Respiratory protection:
Wear a dust mask or suitable respirator if airborne dust may occur.

Hand protection:
Wear protective gloves.

Eye protection:
Wear safety goggles.

Skin protection:
Wear suitable protective clothing.

Hygiene measures:
Wash hands after handling.
Do not eat, drink, or smoke in working areas.

Properties of Outdoor Matting Agent HM3329:
Apperance: Light yellow powder
Solid Content: min. 99.0%