Quick Search
Peramin CONPAC 500 is a powdered superplasticizer, specially designed to bring rapid and excellent fluidity even at low dosages for all types of formulations, especially in ternary Calcium Aluminates Cement rich formulations.
The superplasticizer Peramin CONPAC 500 is a powder product based on polycarboxylates.
Peramin CONPAC 500 is well adapted to ternary or high ettringitic yield binders.
Peramin CONPAC 500 provides an excellent flow to the fresh mortar, at low dosage.
The high water reduction obtained with Peramin CONPAC 500 improves the mechanical properties.
Peramin CONPAC 500 is compatible with all admixtures on the market and especially with
Peramin CONPAC 500, but laboratory trials are advised before any industrial use.
Peramin CONPAC 500 is recommended for powder formulations.
The fields of application are: dry mortar industry, but not concrete applications according to eurocode 2.
Typically, the dosage of Peramin CONPAC 500 varies from 0.05 - 1.0 % by weight of binder.
Peramin CONPAC 500 is our latest generation of Poly-Carboxylated Ether (PCE) superplasticizers, designed to offer the most robust and affordable solution.
Peramin CONPAC 500, in combination with the Imerys Aluminates specialty binders, deliver high end applicative performance from fresh mortar stage to hardened mortar in Self-Leveling Underlayments and flooring compounds.
Peramin CONPAC 500 is a polycarboxylate ether powder.
Peramin CONPAC 500 is well adapted to ternary or highettringitic yield binders.
Peramin CONPAC 500 provides an excellent flow to the fresh mortar, at low dosage.
The high water reduction obtained with Peramin CONPAC 500 improves the mechanical properties.
Peramin CONPAC 500 is a new generation dispersing agent.
Peramin CONPAC 500 is well adapted to ternary or high-ettringitic yield binders.
Peramin CONPAC 500 gives an homogeneous and non segregating mortar and grout.
Peramin CONPAC 500 provides the possibility to reduce water content, thus increasing strengths.
USES:
-Self-Leveling Underlayments and Overlayments
-Cementitious and Calcium Sulfate based screeds
-Tile adhesives and grouts
-Renders
-Non-shrink grouts
-Cement paints
-Technical mortars
BENEFITS:
-Rapid attainment of flowability
-Extended flow retention
-Good self–healing ability
-High rapid strength development
-Tolerance to variability of Portland cement and overwatering
-Full compatibility with all retarders
PROPERTIES:
-Colour: Yellowish to greyish
-Dry content (% by mass): > 95
-pH (5% solution): 5.5 – 7.5
-Alkalis as Na20eq (% by mass): < 14
-Chloride content (% by mass): < 0.1
SPECIFICATIONS:
Peramin CONPAC 500 is produced and controlled within a quality management system that is certified according to ISO 9001.
The specification limits define the absolute limits of product conformity applicable for individual values.
The usual range represents typical values of production.
FEATURES:
-Excellent flow properties
-High strengths development
-Tolerance to overwatering on jobsite
-Robust to raw materials variations in formulation
- Very high range water reducer
- Delivers excellent flowability
- Improved stability
- Delivers consistent flow
- Dispersing effect
STORAGE:
For optimal performance, Peramin Conpac 500 and Peramin Conpac 700 should be stored in its original packaging, in dry conditions at 5 – 40ºC and not in direct contact with the ground or double stacked.
When stored in these conditions, performance is guaranteed for a minimum of 18 months.
Shelf life:12 months at 5 – 35°C in unopened bags.
The product may absorb moisture and should be stored in dry premises.
Open bags should be carefully resealed and used within a relatively short period of time.
Dry mixed homogeneously with other ingredients of dry mortar and packaged as one product, which can be at job site mixed with recommended dosage of water for application.
Recommended dosage is 0.015-0.45% based on binder weight.
The detailed dosage should be determined by test in advance according to local raw materials and construction regulation.
