PERGUT S 20

Pergut S 20  is used binder for, among other things, anticorrosion-, concrete floor coatings and roadmarking paints.
Pergut S 20  is used in solvent-borne adhesives. 
Pergut S 20 is a chlorinated rubber, primarily used as a binder in applications such as anticorrosion coatings, concrete floor coatings, and road marking paints.

CAS Number: 9006-03-5
EC Number: 618-468-6
Molecular Formula: [C₁₀H₁₁Cl₇]ₙ
Molecular Weight: As a polymer, the molecular weight of Pergut S 20 varies depending on the degree of polymerization. 

 
SYNONYMS:
Chlorinated rubber, Adbond 1000 Clear, Adeka CR 10, Adeka CR 150, Adeka CR 20, Adeka CR 40, Adeka CR 5, Alloprene, Alloprene R 10, Alloprene R 20, Alloprene R 40, C-Raban 1HB, Chlorofan S 10, Chlortex 20, Chlortex 40, Hardlen 15L, KCh 1116, KCh 749, KCh 770, KCh 771, KhKVV, NB Coat CR 503, Natural rubber (chlorinated), Parlon, Parlon 300Cp, Parlon S 5, Parlon S 10, Parlon S 20, Parlon S 125, Parlon S 300, Pergut, Pergut S 10, Pergut S 40, Pergut S 90, Rabal 100, Rabal 100P, Superchlone CR 5, Superchlone CR 10, Superchlone CR 20

Pergut S 20  is chlorinated rubber. 
Pergut S 20  shows good compatibility with many solvents, plasticizers and binders. 
Shelf life of Pergut S 20  is 6 months.

Pergut S 20  20 is a chlorinated rubber produced, primarily used as a binder in various coating applications. 
Pergut S 20  is a white Powder Similar To CR30
Pergut S 20  is a white or pale yellow powder, soluble in toluene, xylene or benzene solvents.

Pergut S 20  is soluble in solvents such as toluene, xylene or benzene.
Pergut S 20  is a chlorinated rubber.
Pergut S 20 is a chlorinated rubber product primarily used as a binder in various coating applications, including anticorrosion coatings, concrete floor coatings, and road marking paints. 

Pergut S 20 is produced and is known for its fast-drying properties and resistance to weather, water, and chemicals. 
As a polymer derived from the chlorination of natural rubber, Pergut S 20 does not have a fixed molecular formula or molecular weight. 
The properties of chlorinated rubber can vary based on the degree of chlorination and the molecular weight of the original natural rubber. 

Typically, chlorinated rubbers have chlorine contents of 65% by weight or higher, which contributes to their solubility in organic solvents and compatibility with various binders.
These properties make Pergut S 20 suitable for formulating fast-drying coatings with good weather stability and resistance to water and chemicals. 

USES and APPLICATIONS of PERGUT S 20:
Pergut S 20  is used as a binder to formulate fast-drying anticorrosion coatings, abrasion-resistant concrete floor coatings and roadmarking paints. 
Pergut S 20  offers good compatibility with many solvents, plasticizers and binder. 

Pergut S 20  provides good weather stability and resistance to water and chemicals.
Pergut S 20  is used for Paint.
Pergut S 20  is commonly used for Paint, printing ink and adhesives, solvent.

Anticorrosion Coatings: Pergut S 20 is utilized to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals.
Concrete Floor Coatings: Pergut S 20  is employed in abrasion-resistant concrete floor coatings, enhancing durability.

Roadmarking Paints: Pergut S 20  is used in roadmarking paints due to its excellent adhesion and wear resistance.
Pergut S 20  is used binder for, among other things, anticorrosion-, concrete floor coatings and roadmarking paints.

Pergut S 20  is used in solvent-borne adhesives. 
Pergut S 20 is a chlorinated rubber, primarily used as a binder in applications such as anticorrosion coatings, concrete floor coatings, and road marking paints.

BENEFITS AND CHARACTERISTICS OF PERGUT S 20:
*Fast-Drying: 
Pergut S 20 facilitates quick application and curing processes.

*Weather and Chemical Resistance: 
Pergut S 20 offers durability against environmental factors and exposure to various chemicals.

*Excellent Adhesion: 
Pergut S 20 provides strong bonding to metals such as steel, iron, and zinc, as well as to mineral substrates.

*Compatibility: 
Compatible with many solvents, plasticizers, and binders, including alkyd and acrylic resins. 

*Low Carbon Tetrachloride Content: 
Pergut S 20 ensures minimal presence of carbon tetrachloride, enhancing safety during handling. 

PROPERTIES OF PERGUT S 20:           
Pergut S 20  binders and additives for chlorinated rubber anti-corrosion coatings, cement floor coatings and road marking coatings

STORAGE RECOMMENDATIONS OF PERGUT S 20:
*Conditions: 
Store Pergut S 20  in original sealed containers at temperatures between 10 - 25 °C, protected from direct sunlight, moisture, heat, and foreign materials.

*Shelf Life: 
Twelve months from the date of receipt when stored under recommended conditions.

SOLUBILITY OF PERGUT S 20:
Pergut S 20 is soluble in aromatic hydrocarbons, esters, ketones, ethers, animal and vegetable oils, and chlorinated hydrocarbons. 
Pergut S 20 is insoluble in aliphatic hydrocarbons, alcohols, and water. 

STORAGE AND HANDLING OF PERGUT S 20:
*Storage Conditions: 
Store in a cool, dry, and well-ventilated area at room temperature, protected from humidity.

*Safety: 
Handle with care. 
Classified as non-dangerous with stable chemical properties.  

PHYSICAL and CHEMICAL PROPERTIES of PERGUT S 20:
Form: Fine powder.
Color: White or yellowish.
Density: Approximately 1.5 g/cm³.
Chlorine Content: ≥ 64.5% by weight.
Solubility: Insoluble in water and ethanol; 
soluble in aromatic hydrocarbons, 
esters, ketones, ethers, animal and vegetable oils, 
and chlorinated hydrocarbons.
Melting Point: Between 200 - 250 °C.
Viscosity (at 23°C, 18.5% in toluene):

Value: 16 - 24 mPa·s.
Iodine Color Value (18.5% in toluene):
Value: ≤ 7.
Appearance: White or pale yellow powder
solid content: ≥98%
Chlorine Content: 64,5±1%
Viscosity (Viscosity is measured 20% xylene solution at 25 °C): 30±2 dissolution
Benzene solution: According to CR: toluene solution
For (1:4) or (2:3) dissolution.
Appearance: White or yellowish loose and soft powder.
Apparent Density: ≥0.08 g/ml.

Volatile Content: ≤0.5%.
Chlorine Content: ≥64%.
Viscosity (18.5% in toluene at 23°C): 20 ± 4 mPa·s.
Toluene Content: ≤2.5%.
Iodine Color Value (18.5% in toluene): ≤7. 
Molecular Formula: [C₁₀H₁₁Cl₇]ₙ
Molecular Weight: As a polymer, the molecular weight of Pergut S 20 varies depending on the degree of polymerization. 
Specific molecular weight details are not provided in the available sources.
Appearance: White, amorphous powder.

Chlorine Content: Approximately 65%.
Density: 1.43–1.50 g/cm³.
Softening/Decomposition Point: 135–140°C.
CAS Number: 9006-03-5
EC Number: 618-468-6
Appearance: White or yellowish loose and soft powder
Chlorine Content: ≥ 64.5% by weight
Density: Approximately 1.5 g/ml
Viscosity (18.5% in toluene at 23 °C): 20 ± 4 mPa·s

FIRST AID MEASURES of PERGUT S 20:
-Description of first-aid measures
*General advice:
Show this material safety data sheet to the doctor in attendance.
*If inhaled:
After inhalation: 
Fresh air.
*In case of skin contact: 
Take off immediately all contaminated clothing. 
Rinse skin with
water/ shower.
*In case of eye contact:
After eye contact: 
Rinse out with plenty of water. 
Call in ophthalmologist. 
Remove contact lenses.
*If swallowed:
After swallowing: 
Immediately make victim drink water (two glasses at most). 
Consult a physician.
-Indication of any immediate medical attention and special treatment needed.
No data available

ACCIDENTAL RELEASE MEASURES of PERGUT S 20:
-Environmental precautions:
Do not let product enter drains.
-Methods and materials for containment and cleaning up:
Cover drains. 
Collect, bind, and pump off spills. 
Observe possible material restrictions. 
Take up dry. 
Dispose of properly. 
Clean up affected area.

FIRE FIGHTING MEASURES of PERGUT S 20:
-Extinguishing media:
*Suitable extinguishing media:
Carbon dioxide (CO2) 
Foam 
Dry powder
*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.
-Further information:
Prevent fire extinguishing water from contaminating surface water or the ground water system.

EXPOSURE CONTROLS/PERSONAL PROTECTION of PERGUT S 20:
-Control parameters:
--Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:
*Eye/face protection:
Use equipment for eye protection. 
Safety glasses
*Body Protection:
protective clothing
*Respiratory protection:
Recommended Filter type: Filter A 
-Control of environmental exposure:
Do not let product enter drains.

HANDLING and STORAGE of PERGUT S 20:
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Tightly closed. 
Dry.

STABILITY and REACTIVITY of PERGUT S 20:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature) .
-Possibility of hazardous reactions:
No data available