Quick Search
Appearance: White or of- white powder or crystlline power,odorless
Solubility: Very soluble in N,N-Dimethylformamide,Soluble in methanol,Sparingly soluble inglacial acetic acid, Very slightly soluble inchloroform, Practically insoluble in water.
Melting Point: 152°C~156°C
APPLICATIONS
Pergut S 40 is a chlorinated rubber used as a binder for anti-corrosion coatings.
So, Pergut S 40 is acombination binder for e.g. alkyd resins, acrylates and ketone resins.
Generally speaking, Pergut S 40 has good compatibility with many solvents, plasticizers and binders.
However, it is necessary to test the solubility / compatibility of Pergut S 40 in each case.
Pergut S 40 can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals.
Thus, Pergut S 40 is used as a combination binder, for e.g. alkyd resins, acrylates and ketone resins.
Pergut S 40 improves the initial adhesion and water repellency of the system.
Pergut S 40 is permitted for use as an inert ingredient in non-food pesticide products.
Furthermore, Pergut S 40 is used in resins.
Generally speaking, Pergut S 40 has good compatibility with many solvents, plasticizers and binders.
However, it is necessary to test the solubility / compatibility of Pergut S 40 in each case.
Pergut S 40 can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals.
Further, Pergut S 40 can also be used in abrasion-resistant concrete floor coatings and roadmarking paints.
Pergut S 40 is used as a combination binder for e.g. alkyd resins, acrylates and ketone resins.
More to that, Pergut S 40 improves drying properties and resistance to inorganic acids.
Pergut S 40 can be used to formulate fast-drying swimming pool and concrete coatings with good weather stability and resistance to water and chemicals.
Pergut S 40 is soluble in aromatic and chlorinated hydrocarbons and in ethyl acetate.
On account of its high polarity, Pergut S 40 is especially suitable for the formulation of primers and key coats for rubber/metal bonds.
Pergut S 40 is binder for, among other things, adhesives.
Pergut S 40 is soluble in aromatic and chlorinated hydrocarbons and in ethyl acetate.
Moreover, Pergut S 40 is a kind of chlorinated rubber.
Pergut S 40 is binder for anti-corrosion coatings; combination binder for e.g. alkyd resins, acrylates and ketone resins.
Pergut S 40 is binder for anti-corrosion coatings; combination binder for e.g. alkyd resins, acrylates and ketone resins
Generally speaking, Pergut S 40 has good compatibility with many solvents, plasticizers and binders.
However, Pergut S 40 is necessary to test the solubility/compatibility in each case.
Pergut S 40 can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals.
Furthermore, Pergut S 40 is used as a combination binder.
Pergut S 40 improves drying properties and resistance to inorganic acids.
Pergut S 40 is a derived product modified from the natural rubber through chlorination.
Moreover, Pergut S 40 finds wide application in the production of coatings, inks, adhesives, etc.
The quality of Pergut S 40 is stable and reliable.
Pergut S 40 is trustworthy and well received by the customers.
Furthermore, Pergut S 40 is used in coatings to remarkably improve the coating properties such as weatherability and water resistance, insulation, inflammability, anti-acidity, anti-alkali, adhesion as well as impact strength.
Pergut S 40 coatings is widely applied to surface protection of materials for severe situation, such as shipping, offshore platforms, bridges, docks, containers, motor vehicle chassis, road signs, chemical equipment, etc.
Additionally, high viscosity Pergut S 40 is applied to high-strength adhesives production, or added into other rubber products to improve its quality, while the low-viscosity product is applied to high-grade ink making.
DESCRIPTION
Pergut S 40 is a chlorinated rubber.
More to that, Pergut S 40 is binder for anti-corrosion coatings; combination binder for e.g. alkyd resins, acrylates and ketone resins.
Pergut S 40 can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals.
Used as a combination binder, Pergut S 40 improves drying properties and resistance to inorganic acids.
Pergut S 40 has good compatibility with many solvents, plasticizers and binders. However, it is necessary to test the solubility/compatibility in each case.
Moreover, Pergut S 40 can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals.
Used as a combination binder, Pergut S 40 improves drying properties and resistance to inorganic acids.
Pergut S 40 is a chlorinated rubber.
Further, Pergut S 40 has good compatibility with many solvents, plasticizers and binders.
The shelf life of Pergut S 40 is six months and recommended storage temperature is 10-25°C.
Pergut S 40 can be used in:
Non-reactive systems
Chlorinated rubber
Material
Adhesives
Solventborne, Contact adhesive
Coatings, paints & inks
Solventborne, Flexible, Elastic
PROPERTIES
State of Matter: solid
Appearance: powder
Color: White
Odor: almost odourless
Odor Threshold: No Data Available
pH: 8 - 9
Melting Point: 200 - 250 °C (392 - 482 °F) (DIN 53736)
Boiling Point: No Data Available
Flash Point: No Data Available
Evaporation Rate: No Data Available
Flammability: No Data Available
Lower Explosion Limit: 1.2 %(V) for the solvent
Upper Explosion Limit: 7.8 %(V) for the solvent
Vapor Pressure: No Data Available
Vapor Density: No Data Available
Density: ca. 1.5 g/cm³ (DIN 53479)
Relative Vapor Density: No Data Available
Specific Gravity: No Data Available
Solubility in Water: insoluble @ 15 °C (59 °F)
Partition Coefficient: noctanol/water:
No Data Available
Auto-ignition Temperature: No Data Available
Decomposition Temperature: >= 255 °C (491 °F) Decomposition begins at 255 °C.
Dynamic Viscosity: not applicable
Kinematic Viscosity: No Data Available
Bulk Density: ca. 0.4 kg/m3 (DIN ISO 697)
Self Ignition: The substance or mixture is not classified as self heating.
FIRST AID
Most Important Symptom(s)/Effect(s):
Acute:
Pergut S 40 may cause mechanical irritation of the respiratory tract, skin, and/or eyes.
Eyes may become red, feel scratchy and may tear.
Gases and fumes evolved during the thermal processing or decomposition of Pergut S 40 may irritate the eyes, skin or respiratory tract.
Contact with heated material can cause thermal burns.
Eye Contact:
In case of contact, flush eyes with plenty of lukewarm water.
Use fingers to ensure that eyelids are separated and that the eye is being irrigated.
Get medical attention if irritation develops.
Skin Contact:
In case of skin contact, wash affected areas with soap and water.
Get medical attention if irritation develops.
Remove contaminated clothing and shoes.
Wash clothing before reuse.
Inhalation:
If inhaled, remove to fresh air.
If breathing is difficult, give oxygen.
If not breathing, give artificial respiration.
Get medical attention.
Ingestion:
If ingested, do not induce vomiting unless directed to do so by medical personnel.
Get medical attention.
STORAGE AND HANDLING
Store Pergut S 40 in original sealed containers.
Recommended storage temperature of Pergut S 40 is 10 - 25 °C.
Protect Pergut S 40 from direct sunlight, moisture, heat and foreign material.
The lapse of the six months period does not necessarily mean that Pergut S 40 no longer meets specifications or the set values.
However, prior to using Pergut S 40, it is recommended to test such a product if it still meets the specifications or the set values.
Handling/Storage Precautions:
Pergut S 40 may form explosible dust/air mixtures.
Avoid creating dust.
Remove all sources of ignition, including flames, heat, and sparks.
Ground and bond containers and equipment before transferring to avoid static sparks.
Use non-sparking tools and equipment.
Avoid breathing dust.
Avoid contact with skin or clothing.
Avoid contact with eyes.
Use only with adequate ventilation/personal protection.
Wash thoroughly after handling.
Keep container closed when not in use.
Pergut S 40 contains a maximum of 0.005% (50 ppm) carbon tetrachloride.
Vapors of solvent and carbon tetrachloride may be released by heating or placing this material in solution and can accumulate during storage in the drum head space.
Store Pergut S 40 in a cool dry place.
Store Pergut S 40 in original or similar containers.
Minimize dust generation and accumulation.
Protect equipment (e.g. storage bins, conveyors, dust collectors) with explosion vents.
Avoid extreme heat.
SYNONYMS
Adbond 1000 Clear; Adeka CR 10
Adeka CR 150; Adeka CR 20
Adeka CR 40; Adeka CR 5
Alloprene; Alloprene R 10
Alloprene R 20; Alloprene R 40
C-Raban 1HB; Chlorofan S 10
Chlortex 20; Chlortex 40
Hardlen 15L; KCh 1116; KCh 749
KCh 770; KCh 771; KhKVV; NB Coat CR 503
Natural rubber, chlorinated; Parlon
Parlon 300Cp; Parlon S 10; Parlon S 125
Parlon S 20; Parlon S 300; Parlon S 5
Pergut; Pergut S 10; Pergut S 20; Pergut S 40
Pergut S 90; Rabal 100; Rabal 100P
Superchlone CR 10; Superchlone CR 20
Superchlone CR 5; Rubber, chlorinated; [ChemIDplus]
Chlortex Chlorinated Rubber, Solid
Clortex 10; Clortex 100 Chlorinated Rubber; [Brenntag Canada MSDS]
alloprene r 20
adeka cr 90
kch749
adeka cr 20
chlorofan s 10
kch 111
parlon
adeka cr 5
pergut s 10
rubox ac
cereclor 54dp
cr 150
kch1116
pergut s 5
natural rubber, chlorinated
superchlon cr 5
pergut s 90
kch770
cr 2
weldbond
adeka cr 10
gw 10
adeka cr 150
c-raban 1hb
chlorinated naturalrubber
cr 2 (rubber)
adeka cr 15
rabal 100p
clortex 20
chlorinated rubber
adbond 1000 clear
rubber 613
kl 10
clortex 40
khkvv
adekacr5
nb coat cr 503
alloprene r 40
superchlon cr20
cnr 90
pergut s 20
cr 20
superchlon cr 10
chlorub 20
adekaprene d1
rubber, chlorinated
parlon s 10
rubber,natural, chlorinated
superchlon cr 40
rubber,chlorinated
pergut
chlorub10
parlon s 125
kch 771
rubber marine af
rabal 100
kch771
adeka cr 40
alloprene r 10
parlon 300cp
parlon s 20
alloprene rr 5
parlon s 300
rabamarine af
kch 770
s 20
parlons5
clean rubbertect
rabal100
alloprene
chloraphane s 10
kl 10 (rubber)
alloprene cr 20v
s 130
rubber marine
parlon s 5
pergut s 130
pergut s 170
mmf
pergut s 40
