PLURONIC PE 10500

Pluronic PE 10500 is used as a nonionic surfactant in industrial and institutional cleaning formulations for effective removal of oils and greases.
Pluronic PE 10500 is applied as an emulsifier in formulations to stabilize mixtures of oil and water phases.
Pluronic PE 10500 is used as a wetting agent to improve surface contact and enhance cleaning efficiency.

CAS Number: 9003‑11‑6
EC (EINECS) Number: 618‑355‑0
Molecular Formula: Block copolymer of ethylene oxide and propylene oxide — general unit of (PEO‑PPO‑PEO); precise formula varies by block lengths.
Molecular Weight: ~102.13 (reference monomer unit basis provided for basic structural representation)

SYNONYMS:
Poloxamer 10500, Poloxamer, Pluronic F‑127, Synperonic PE/F‑127, Kolliphor P 407, Polyethylene‑polypropylene glycol block copolymer, PEG‑PPG‑PEG copolymer, polyoxyethylene‑polyoxypropylene block polymer

Pluronic PE 10500 is a non‑ionic block copolymer surfactant characterized by a central hydrophobic polypropylene glycol (PPO) block flanked by two hydrophilic polyethylene glycol (PEO) chains. 
This segmented structure gives Pluronic PE 10500 amphiphilic behavior — meaning it interacts with both water and oil phases in formulations. 

Pluronic PE 10500 is part of the Pluronic / Poloxamer family of surfactants used widely in detergents, industrial cleaning, dispersing systems, and foam control.
Pluronic PE 10500 is a low-foaming, nonionic surfactant. 
Pluronic PE 10500 is a block copolymer in which the central polypropylene glycol group is flanked by two polyethylene glycol groups.

Pluronic PE 10500 is an excellent dispersing additive for flowables e.g., SC and FS formulations for a variety of active ingredients.
Pluronic PE 10500 is a non-ionic block copolymer surfactant. 
Due to this structure of Pluronic PE 10500, hydrophilicity and lipophilicity exist simultaneously , and dispersion, emulsification, and wetting in water are possible.

Pluronic PE 10500, also known as Poloxamer 10500, is a chemical feedstock that can be used in various applications. 
Pluronic PE 10500 is a nonionic surfactant consisting of a combination of ethylene oxide and propylene oxide units.
Physical properties such as density and flash point are not specifically specified for Pluronic PE 10500. 

Pluronic PE 10500 is a viscous liquid at room temperature. Further information on its physical properties can be provided upon request.
Pluronic PE 10500 is not classified as a hazardous substance and does not require special labeling according to applicable regulations. 
Pluronic PE 10500 has no specific registration numbers such as CAS, EC, PubChem or ECHA.

Pluronic PE 10500 is a block copolymer surfactant composed of polyethylene oxide (PEO) and polypropylene oxide (PPO) segments. 
Pluronic PE 10500's full molecular formula and exact weight vary depending on the polymer block lengths.

USES and APPLICATIONS of PLURONIC PE 10500:
Dispersing & wetting agent: Due to its amphiphilic nature, Pluronic PE 10500 improves the dispersion of pigment pastes and emulsions.
Formulation additive in agrochemicals & polymers: Pluronic PE 10500 is employed in flowable formulations such as SC (suspension concentrates) and FS (flowable suspensions) as a dispersing additive.
Defoaming & foam control: Pluronic PE 10500 is used to control foam in metal cleaning baths, dye baths, and boiler feed water systems where foam is detrimental.

Emulsion polymerization: In chemical processes, Pluronic PE 10500 acts as a low‑foaming emulsifier and helps stabilize polymer dispersions.
Pluronic PE 10500 is a versatile surfactant used in numerous industrial and formulation contexts.
Industries and applications of Pluronic PE 10500: Industrial Formulators, Agrochemicals / Additives for crop protection, Paints & Coatings / Resin Emulsification, Plastics / Polyurethane, Pulp & Paper / Thinking.

Applications of Pluronic PE 10500: Pesticide formulations (Flowables, SC, FS).
Pluronic PE 10500 is used as an auxiliary agent in the grinding process; dispersion: improves particle size stability.
Pluronic PE 10500 is used detergent/Cleaner, Coatings/Paints, Industrial Treatment Solutions, Cosmetics/Personal Care (Partial).

Diversification of applications of Pluronic PE 10500 is possible in other process chemicals, etc.
Industries & Applications of Pluronic PE 10500: Industrial Formulators, Agrochemicals / Additives for crop protection, Paints & Coatings / Resin Emulsification, Plastics / Polyurethane, Pulp & Paper / Deinking.

Pluronic PE 10500 is frequently used in the pharmaceutical industry, particularly in drug formulation. 
Pluronic PE 10500 serves as an emulsifier, stabilizer, and solubilizer for various active ingredients. 
Due to its amphiphilic properties, Pluronic PE 10500 can help improve the solubility of lipophilic active ingredients in aqueous media.

Furthermore, Pluronic PE 10500 is used in biotechnology and cell culture. 
Pluronic PE 10500 can be used as an additive in cell culture media to improve cell adhesion and reduce aggregate formation.
Pluronic PE 10500 is used as a nonionic surfactant in industrial and institutional cleaning formulations for effective removal of oils and greases.

Pluronic PE 10500 is applied as an emulsifier in formulations to stabilize mixtures of oil and water phases.
Pluronic PE 10500 is used as a wetting agent to improve surface contact and enhance cleaning efficiency.
Pluronic PE 10500 is incorporated in textile processing for scouring, wetting, and dispersion of dyes and auxiliaries.

Pluronic PE 10500 is used in coatings and paints to improve dispersion and stability of pigments.
Pluronic PE 10500 is applied in agrochemical formulations as a dispersing and emulsifying agent for active ingredients.
Pluronic PE 10500 is used in metal cleaning and degreasing processes to remove contaminants from surfaces.

Pluronic PE 10500 is incorporated in paper and pulp processing to improve wetting and processing performance.
Pluronic PE 10500 is used as a solubilizer to enhance the dissolution of poorly water-soluble substances.
Pluronic PE 10500 is applied in various formulations requiring low-foam or controlled-foam surfactant systems.

-Industrial cleaning & detergents uses of Pluronic PE 10500:
Pluronic PE 10500 is used as a low‑foaming surfactant and antifoam agent in dishwashing and industrial bottle washing formulations. 
Pluronic PE 10500 suppresses undesirable foam even in the presence of proteins, starches, or adhesives.

FUNCTIONS AND USES of PLURONIC PE 10500:
The Pluronic PE 10500 has the following features:
*Nonionic surfactants
*Low-foaming
Since it is nonionic, Pluronic PE 10500 is compatible with positive and negative/anionic surfactants.
*Dispersant / Emulsifier
*Stably disperse solid particles or drugs within a liquid
*Wetting and dissolution promotion
*Decrease in surface tension → Increase in wetting power

BENEFITS & CHARACTERISTICS of PLURONIC PE 10500:
Pluronic PE 10500 offers several formulation advantages:
*Low foaming: 
Pluronic PE 10500 helps prevent foam formation in cleaning and industrial systems, even with complex detergent mixtures.

*Good wetting and dispersing properties: 
Pluronic PE 10500's amphiphilicity supports the mixing and stabilization of hydrophobic substances in aqueous systems.

*Compatibility: 
Pluronic PE 10500 works with other surfactants to improve performance (e.g., with Plurafac or other Pluronic grades).

*Non‑ionic and mild: 
Pluronic PE 10500 is non‑ionic nature reduces interactions with ionic species and broadens compatibility range.

*Stable: 
Pluronic PE 10500 is suitable for use across a variety of pH and temperature conditions.

CHEMICAL PROPERTIES of PLURONIC PE 10500:
*Chemically, Pluronic PE 10500 is a triblock copolymer: 
PEO–PPO–PEO. 
The hydrophilic (PEO) blocks confer water solvency, while the hydrophobic (PPO) core interacts with oils and hydrophobic surfaces. 
In water, these copolymers can self‑assemble into micelles with a hydrophobic core and hydrophilic shell — a property useful for solubilization and dispersion.

*Amphiphilic structure: 
Pluronic PE 10500 enables surface activity
No formal ionic charge → Pluronic PE 10500 is non‑ionic surfactant
Pluronic PE 10500 is stable under normal processing conditions and compatible with many other surfactants

*Chemical Reactivity: 
Limited reactivity except under extreme pH; mostly inert polymer backbone

PHYSICAL and CHEMICAL PROPERTIES of PLURONIC PE 10500:
Chemical structure : EO-PO-EO block copolymer (poloxamer)
There is a hydrophobic polypropylene glycol (PPO) block in the center, and hydrophilic polyethylene glycol (PEG) blocks are attached to both ends.
Molar mass : approx. 6,500 g/mol
EO content : Approx. 50% (mass ratio of ethylene oxide)
CAS No .: 9003-11-6 
Form : White waxy solid at room temperature
Density : Approx. 1.03 g/cm³ (at 60 °C)
pH (aqueous solution) : Approx. 7

Melting point : Approx. 44 °C
Cloud point (water/NaCl, etc.) : Generally 75 °C or higher
Solubility in water : Relatively more soluble in cold water (micellization and phase separation may occur as temperature rises)
CAS number: 9003-11-6
EC number: 500-038-2
PubChem CID: 24899782
ECHA number: 100.116.314
CAS Number: 9003‑11‑6
EC (EINECS) Number: 618‑355‑0

Molecular Formula: Block copolymer of ethylene oxide and propylene oxide — general unit of (PEO‑PPO‑PEO); precise formula varies by block lengths.
Molecular Weight: ~102.13 (reference monomer unit basis provided for basic structural representation)
Appearance: Cloudy paste / hazy viscous liquid
Color: Off‑white to light yellow
State: Liquid to paste depending on storage temperature and processing
Solubility: Soluble in water when blended appropriately with solvents such as ethanol or isopropanol to improve clarity
Viscosity: Medium to high (typical of non‑ionic polymer surfactants)
Ionic Character: Non‑ionic (no charge in solution)

FIRST AID MEASURES of PLURONIC PE 10500:
-Description of first-aid measures
*General advice:
Show this material safety data sheet to the doctor in attendance.
*If inhaled:
After inhalation: 
Fresh air.
*In case of skin contact: 
Take off immediately all contaminated clothing. 
Rinse skin with
water/ shower.
*In case of eye contact:
After eye contact: 
Rinse out with plenty of water. 
Call in ophthalmologist. 
Remove contact lenses.
*If swallowed:
After swallowing: 
Immediately make victim drink water (two glasses at most). 
Consult a physician.
-Indication of any immediate medical attention and special treatment needed.
No data available

ACCIDENTAL RELEASE MEASURES of PLURONIC PE 10500:
-Environmental precautions:
Do not let product enter drains.
-Methods and materials for containment and cleaning up:
Cover drains. 
Collect, bind, and pump off spills. 
Observe possible material restrictions. 
Take up dry. 
Dispose of properly. 
Clean up affected area.

FIRE FIGHTING MEASURES of PLURONIC PE 10500:
-Extinguishing media:
*Suitable extinguishing media:
Carbon dioxide (CO2) 
Foam 
Dry powder
*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.
-Further information:
Prevent fire extinguishing water from contaminating surface water or the ground water system.

EXPOSURE CONTROLS/PERSONAL PROTECTION of PLURONIC PE 10500:
-Control parameters:
--Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:
*Eye/face protection:
Use equipment for eye protection. 
Safety glasses
*Body Protection:
protective clothing
*Respiratory protection:
Recommended Filter type: Filter A 
-Control of environmental exposure:
Do not let product enter drains.

HANDLING and STORAGE of PLURONIC PE 10500:
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Tightly closed. 
Dry.

STABILITY and REACTIVITY of PLURONIC PE 10500:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature).
-Possibility of hazardous reactions:
No data available