DESCRIPTION
Polycarboxylate plasticizers are polymers that are used in dry building mixtures to achieve a plasticizing effect.
The use of polycarboxylate plasticizers makes it possible to improve such indicators as the stackability of self-leveling floors, preservation of mobility, an increase in the strength of mixtures and an improvement in the appearance of the final product.
POLYCARBOXYLATE PLASTICIZERS
DESCRIPTION
Polycarboxylate plasticizers are polymers that are used in dry building mixtures to achieve a plasticizing effect.
The use of polycarboxylate plasticizers makes it possible to improve such indicators as the stackability of self-leveling floors, preservation of mobility, an increase in the strength of mixtures and an improvement in the appearance of the final product.
SPECIFICATIONS
SPS-06
Plasticizer SPS 06 is a highly efficient and eco-friendly plasticizer in powder form, obtained by spray drying on the basis of modified polyether carboxylate.
Polycarboxylate plasticizer SPS-06 is designed for the production of dry mixes of mortars and concrete. Contributes to a significant reduction in the amount of water, an increase in the fluidity of the mixture and at the same time, provides optimal cohesion and maximum self-compaction. Significant water reduction, excellent mobility combined with good early strength have a positive impact on the previously mentioned uses.
RECOMMENDED APPLICATIONS:
Adhesive building mixtures
Shrinkage-free mortars
Various screeds
Self-leveling floors
Plaster and anhydrite screeds
SPECIFICATIONS
Chemical base
Modified Polycarboxylate Powder
View
White or slightly yellowish powder
Bulk density
500 ± 50 g / l
PH value of solution at 23 ° С
6.0 ± 1.0
Dry matter content
96 ± 1%
Humidity
≤ 4%
Chlorine ion content
≤ 0.02%
Alkali content
≤ 0.3%
Water reduction
≥ 25%
Heat loss
≤ 2.0 wt.
PACKAGING:
Plastic woven bags 25 kg with polypropylene liner.
SHELF LIFE:
12 months from date of production if properly stored in undamaged, unopened, original sealed packaging in a dry place at temperatures between + 5 ° C and + 30 ° C
SPS-08
Plasticizer SPS 08 is a highly efficient and eco-friendly polycarboxylate plasticizer in powder form, produced on the basis of polyethylene glycol ether DD-909 (TPEG 2,400) as the main raw material.
Plasticizer SPS-08 is designed for use in mortars based on inorganic binder: Portland cement, gypsum, anhydrite, lime. It improves the thermal stability of the product, increases the final strength, mobility and fluidity of the mortar mixture, as well as the absence of delamination of the mortar mixture. Differs in high functionality, has good adaptability to various types of cements.
RECOMMENDED APPLICATIONS:
Self-leveling floors and screeds
Putties
Suture fillers
Grout, plasters
SPECIFICATIONS
Chemical base
Modified Polycarboxylate Powder
Bulk density, kg / m³
500 ± 50
PH value of solution at 23 ° С
7.0 ± 1.0
Dry matter content,%
97 ± 1.0
Humidity,%
≤ 3
Water reduction,%
≥ 25
Chlorine ion content,%
≤ 0.02
Alkali content,%
≤ 0.3
PACKAGING:
Plastic woven bags 25 kg with polypropylene liner.
SHELF LIFE:
12 months from date of production if properly stored in undamaged, unopened, original sealed packaging in a dry place at temperatures between + 5 ° C and + 30 ° C