PRODUCTS

POLYGLYKOL 12000 P

Polyglykol 12000 P acts as a binder, thickener, solubilizer and moisturizing agent.
Polyglykol 12000 P is a water-soluble polyalkylene glycol to be used as thickener in fire-resistant hydraulic fluids and in water-based quenchants.
Polyglykol 12000 P offers low toxicity and no emulsifying effect.

CAS Number: 25322-68-3

Polyglykol 12000 P acts as a binder, thickener, solubilizer and moisturizing agent.
Polyglykol 12000 P possesses binding, softening and non-irritating properties.

Polyglykol 12000 P offers low toxicity and no emulsifying effect.
Polyglykol 12000 P is used in creams, lotions and hair styling products.

Therefore Polyglykol 12000 is soluble in water and polar organic solvents like aceton or methanol.
Polyglykol 12000 is insoluble in pure hydrocarbons.

Polyglykol 12000 displays typical chemical reactions of alcohols/diols.
The solidification point, of Polyglykol 12000 is about 58°C

Polyglykol 12000 P is a water-soluble polyalkylene glycol (PAG) to be used as thickener in fire-resistant hydraulic fluids and in water-based quenchants.
Compared to Polyglykol 12000, the Polyglykol 12000 P is the 80% active version and contains 20% water for easier handling.

Polyglykol 12000 is a white waxy solid at room temperature.
Polyglykol 12000 S is a flaked type, Polyglykol 12000 P a powdered type available in 20 kg (S), 25 kg (P) bags or super sacs with up to 500 kg capacity.
Polyglykol 12000 P's two hydroxy end groups as well as Polyglykol 12000 P ether groups mainly control the physical and chemical properties of Polyglykol 12000.

Polyglykol 12000 P is used in skin care.
Polyglykol 12000 P is acts as a slip and mold-release agent, solubilizer, carrier, thickener and antistatic agent.

Polyglykol 12000 P is a water-soluble polyalkylene glycol (PAG) to be used as thickener in fire-resistant hydraulic fluids and in water-based quenchants.

Polyglykol 12000 P acts as a binder, thickener, solubilizer and moisturizing agent.
Polyglykol 12000 P possesses binding, softening and non-irritating properties.

Polyglykol 12000 P offers low toxicity and no emulsifying effect.
Polyglykol 12000 P is used in creams, lotions and hair styling products.

Polyglykol 12000 P is a powdered type available in 25 kg (P) bags or super sacs with up to 500 kg capacity.

Polyglykol 12000 P is a polyethylene glycol that is used for a wide variety of applications including:
Reactive diol/polyether component in polyester or polyurethene resins.
Component of auxiliaries for leather and textile processing.

Cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste).
Lubricant and mould release agent for rubber, plastic and elastomer processing.

Plasticizer and binder for ceramic and concrete manufacturing.
Component of lubricant formulations.

Water soluble, lubricating component in metalworking fluids.
Humectant for paper, wood and cellulose films.

Solvent and humectant for dyes and inks.
Modifier for production of regenerated viscose.
Humectant and plasticizer for adhesives.

Applications of Polyglykol 12000 P:
Polyglykol 12000 P is used as a thickening component for hydraulic fluids (HFC) and can also be used as a lubrication improver for fully synthetic metal working fluids.

Other Applications:
Hydraulic fluids
Quenching fluids
Metal working fluids (fully synthetic)

Benefits of Polyglykol 12000 P:
Use as thickener in fire-resistant hydraulic fluids.

Excellent thickening properties:
Highly effective anti-corrosion and anti-wear properties
Good filtration properties

Compatibility with elastomers
Reducing risk of fire

Use as polymer in quenchants:
Easy dilution in water and avoidance of water insoluble cracking products
Versatile use for different quenching applications

Controlling cooling rates by a balanced composition of the quenching fluid
Achieving a wide range of quenching speeds due to flexible adjustment of the concentration

Formulation Benefits:
Excellent shear stability
Excellent compatibility with other formulation components
Low foaming

Advantages of Polyglykol 12000 P:
Posesses binding
softening and non irritating properties
Offers low toxicity
no emulsifying effect
Other Applications
Skin care (Facial care, Facial cleansing, Body care, Baby care)
Free of hazard label for an easy and safe handling
Broad registration status

Properties of Polyglykol 12000 P:
Polyglykol 12000 P is a clear neutral viscous liquid at room temperature.
Polyglykol 12000 P is soluble in water and polar organic solvents like aceton or methanol at room temperature.

Polyglykol 12000 P is insoluble in pure hydrocarbons.
The cloud point of Polyglykol 12000 P is 75°C.
The solidification point of Polyglykol 12000 P is -30°C.

Therefore Polyglykol 12000 is soluble in water and polar organic solvents like aceton or methanol.
Polyglykol 12000 is insoluble in pure hydrocarbons.

Polyglykol 12000 displays typical chemical reactions of alcohols/diols.
The solidification point, of Polyglykol 12000 is about 58°C

Stability and Reactivity of Polyglykol 12000 P:

Reactivity:
No dangerous reaction known under conditions of normal use.

Chemical stability:
Stable under normal conditions.

Possibility of hazardous reactions:
No dangerous reaction known under conditions of normal use.

Conditions to avoid:
None known.

Incompatible materials:
Not known.

Hazardous decomposition products:
When handled and stored appropriately, no dangerous decomposition products are known

Handling and Storage of Polyglykol 12000 P:

Advice on protection against fire and explosion:
Observe the general rules of industrial fire protection.

Advice on safe handling:
Handle in accordance with good industrial hygiene and safety practice.
Use only with adequate ventilation/personal protection.

Avoid contact with skin, eyes and clothing.
Use only with adequate ventilation.
Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.

Further information on storage conditions:
Store in a cool, dry, well-ventilated area.
Keep container sealed when not in use.

Keep in an area equipped with sprinklers.
Keep from freezing.

Storage of Polyglykol 12000 P:
When stored in a cold, dry place in a closed container Polyglykol 12000 P can be kept for at least two years.

First Aid Measures of Polyglykol 12000 P:

General advice:
Remove/ Take off immediately all contaminated clothing.
Get medical advice/ attention if you feel unwell.

If inhaled:
Move the victim to fresh air.
Give oxygen or artificial respiration if needed.

Get immediate medical advice/ attention.
Never give anything by mouth to an unconscious person.

In case of skin contact:
Remove contaminated clothing and shoes.
Wash off immediately with plenty of water for at least 15 minutes.

Wash off with soap and water.
Get medical attention if irritation develops and persists.

In case of eye contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.

If swallowed:
Rinse mouth.
Do NOT induce vomiting.

Never give anything by mouth to an unconscious person.
Get medical advice/ attention.

Most important symptoms and effects, both acute and delayed:
No hazards known at this time.
The possible symptoms known are those derived from the labelling.
No additional symptoms are known.

Notes to physician:
Treat symptomatically.

Firefighting Measures of Polyglykol 12000 P:

Suitable extinguishing media:
Water spray jet
Alcohol-resistant foam
Dry powder
Carbon dioxide (CO2)

Unsuitable extinguishing media:
High volume water jet

Specific hazards during firefighting:

In case of fires, hazardous combustion gases are formed:
Carbon monoxide (CO)
Carbon dioxide (CO2)

Further information:
In the event of fire and/or explosion do not breathe fumes.
During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion

Do not allow run-off from fire fighting to enter drains or water courses.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.

Special protective equipment for firefighters:
Wear an approved positive pressure self-contained breathing
apparatus in addition to standard fire fighting gear.

Accidental Release Measures of Polyglykol 12000 P:

Personal precautions, protective equipment and emergency procedures:
Avoid contact with skin, eyes and clothing.
Wash thoroughly after handling.

Environmental precautions:
Do not allow contact with soil, surface or ground water.
Prevent product from entering drains.

Methods and materials for containment and cleaning up:
Prevent product from entering drains.
Contain spillage, soak up with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local / national regulations.
Clean contaminated surface thoroughly.

Identifiers of Polyglykol 12000 P:
Material number: 292298
Primary product use: Metal processing
Chemical family: Ethylene oxide - propylene oxide - copolymer (branched)
CAS: 25322-68-3

Physical and Chemical Properties of Polyglykol 12000 P:
Appearance: Liquid
Colour: yellow
Odour: characteristic
Odour Threshold: not determined
pH: 10 - 11.4 (68 °F / 20 °C)
Concentration: 50 g/l
Solidification point: ca. 14 °F / -10 °C
Boiling point: ca. 212 °F / 100 °C
Data relate to solvent
Flash point: ca. 500 °F / 260 °C
Evaporation rate: not determined
Self-ignition: no data available
Upper explosion limit / upper
flammability limit: Not applicable
Lower explosion limit / Lower
flammability limit: Not applicable
Vapour pressure: ca. 2.3 kPa
Data relate to solvent
Relative vapour density: no data available
Density: ca. 1.07 g/cm3 (122 °F / 50 °C)
Solubility(ies):
Water solubility: completely miscible
Partition coefficient: noctanol/water: Not applicable
Auto-ignition temperature: ca. 842 °F / 450 °C
Decomposition temperature: - 428 °F / - 220 °C
Viscosity:
Viscosity, dynamic: approx. 4,200 mPa.s
Viscosity, kinematic: no data available
Metal corrosion rate: Not corrosive to metals
Particle size: Not applicable

Product data: Polyglykol 12000 P:
Water content (DIN 51777) % m/m max.: 0.5
Colour index [APHA] (EN 1557) (25 % in water) max.: 30
pH ( 5 % w/w in water) (DIN EN 1262): 5 – 7
Hydroxyl number (DIN 53240) mg KOH/g: 7.5 – 11
Molecular weight g/mol: 10500 – 15000
Solidification point (EP III) °C: 55 – 60
Viscosity at 20°C (50 % w/w in water) (DIN 51562) mPas: 1100 – 1400
Flash point (DIN 51376) °C: 245
Ignition temperature (DIN 51794) °C: >320
Ethyleneoxid ppm max.: 1
Dioxane ppm max.: 1

Other Descriptions of Polyglykol 12000 P:

Product Function:
Thickener

Chemical Type:
Polyalkylene glycol

Product Type:
Additive - Anti static agents
Solvents - Glycols glycol ethers - Ethylene glycols
Additive - Binders
Additive - Solubilizers
Additive - Lubricants
Additive - Rheology modifiers thickeners

Industry:
Cosmetics

Chemical Composition:
Polyethylene glycol

Other Polyglykol Products:
Polyglykol 1000
Polyglykol 1000 SG VITA
Polyglykol 10000 S
Polyglykol 10000 SG
Polyglykol 12000 S
Polyglykol 1500 FL PU
Polyglykol 1500 S
Polyglykol 2000 PU
Polyglykol 2000 S
Polyglykol 300
Polyglykol 400
Polyglykol 4000 S
Polyglykol 600
Polyglykol 600 PU
Polyglykol 6000 P
Polyglykol 8000 P
Polyglykol 8000 S
Polyglykol 9000 S
Polyglykol AM 1100
Polyglykol AM 250
Polyglykol AM 450
Polyglykol D 21/150
Polyglykol D 21/300
Polyglykol D 21/700
Polyglykol G 500
Polyglykol M 1000
Polyglykol M 2000 FL
Polyglykol M 2000 S
Polyglykol M 350
Polyglykol M 350 PU
Polyglykol M 500
Polyglykol M 500 PU
Polyglykol M 750
Polyglykol M 750 PU
Polyglykol 10000 FL
Polyglykol 1500 FL
Polyglykol 1500 PS
Polyglykol 200 LVC
Polyglykol 2000 FL
Polyglykol 3400 FL
Polyglykol 3400 PS
Polyglykol 4000 PS
Polyglykol 4000 FL
Polyglykol 4000 M50
Polyglykol 4000 P
Polyglykol 4000 PF
Polyglykol 4000 PSK
Polyglykol 6000 FL
Polyglykol 6000 PF
Polyglykol 6000 PS
Polyglykol 8000 FL
Polyglykol 8000 PF
Polyglykol 8000 PS
Polyglykol 9000 FL
Polyglykol A 11/1800
Polyglykol A 32/550
Polyglykol A 400
Polyglykol A 500
Polyglykol PR 600