Quick Search
Polyglykol 12000 S is a humectant, solubilizer, binder, thickener and moisturizing agent.
Polyglykol 12000 S possesses binding, softening and non-irritating properties.
Polyglykol 12000 S offers low toxicity and no emulsifying effect.
CAS Number: 25322-68-3
Polyglykol 12000 S is a flaked type.
Polyglykol 12000 S is a humectant, solubilizer, binder, thickener and moisturizing agent.
Polyglykol 12000 S offers low toxicity and no emulsifying effect.
Polyglykol 12000 S possesses softening and non-irritating properties.
Polyglykol 12000 S is used in lotions, creams, conditioners and hair styling products.
Polyglykol 12000 S has very low water content and is compatible with hard water.
Polyglykol 12000 S is a solubilizer, binder, thickener and moisturizing agent.
Polyglykol 12000 S offers low toxicity and no emulsifying effect.
Polyglykol 12000 S possesses binding, softening and non-irritating properties.
Polyglykol 12000 S is used in lotions, creams and hair styling products.
Polyglykol 12000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions.
The flaked form enables easier handling of the material within production.
Polyglykol 12000 S is specified according to the requirements of the main international ICH guidelines and monographs.
Polyglykol 12000 S is a polyethylene glycol-based solvent, humectant and plasticizer.
Polyglykol 12000 S is suitable for paint additive manufacturing.
Polyglykol 12000 S is a solubilizer, binder, thickener and moisturizing agent.
Polyglykol 12000 S offers low toxicity and no emulsifying effect.
Polyglykol 12000 S possesses binding, softening and non-irritating properties.
Polyglykol 12000 S is used in lotions, creams and hair styling products.
Polyglykol 12000 S is a polyethylene glycol that is used for a wide variety of applications including:
Reactive diol/polyether component in polyester or polyurethene resins.
Component of auxiliaries for leather and textile processing.
Cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste).
Lubricant and mould release agent for rubber, plastic and elastomer processing.
Plasticizer and binder for ceramic and concrete manufacturing.
Component of lubricant formulations.
Water soluble, lubricating component in metalworking fluids.
Humectant for paper, wood and cellulose films.
Solvent and humectant for dyes and inks.
Modifier for production of regenerated viscose.
Humectant and plasticizer for adhesives.
Applications of Polyglykol 12000 S:
Industrial Applications:
Due to their physical and chemical properties polyethylene glycols areused for a wide variety of applications as:
Reactant:
Polyglykol 12000 S is reactive diol/polyether component in polyester or polyurethane resins
Solvent / Humectant / Plasticizer:
Polyglykol 12000 S is used inaper, wood, cellulose films, inks, paints, coatings, adhesives, sealants, concrete
Release agent / Lubricant:
Polyglykol 12000 S is mould release agent for rubber and elastomer processing, lubricant formulations, metal working fluids
Polyglykol 12000 S is binder for ceramics.
Polyglykol 12000 S is component of auxiliaries for fiber, textile and leather processing.
Uses of Polyglykol 12000 S:
Hair Conditioner
Hair Styling
Performance Claims
Water-soluble
Moisturizing
Anti-perspirant
Conditioning
Benefits of Polyglykol 12000 S:
Good solubility in water
Very low water content
Compatible with hard water
Non-volatile
Outstanding toxicological safety
Properties of Polyglykol 12000 S:
The physical and chemical properties of polyethylene glycols are mainly determined by the two hydroxyl end groups, the ether groups as well as the molecular weight.
Polyglykol 12000 S is a yellowish wax-like solid at room temperature.
Polyglykol 12000 S is soluble in water and polar organic solvents like acetone or methanol.
Polyglykol 12000 S is insoluble in pure hydrocarbons.
Polyglykol 12000 S shows typical chemical reactions of alcohols/diols and a very low evaporation rate.
The solidification point of Polyglykol 12000 is about 58 °C.
Polyglykol 12000 S is a white waxy solid at room temperature.
Polyglykol 12000 S is a flaked type, Polyglykol 12000 P a powdered type available in 20 kg (S), 25 kg (P) bags or super sacs with up to 500 kg capacity.
Polyglykol 12000 S's two hydroxy end groups as well as Polyglykol 12000 S ether groups mainly control the physical and chemical properties of Polyglykol 12000.
Handling and Storage of Polyglykol 12000 S:
Advice on protection against fire and explosion:
Keep away sources of ignition.
Take precautionary measures against build-up of electrostatic charges, e.g earthing during loading and off-loading operations.
Advice on safe handling:
Wear suitable protective equipment.
Keep tightly closed in a dry and cool place.
Do not breathe vapours/dust.
Do not get in eyes or mouth or on skin.
Avoid dust formation. Keep away from sources of ignition.
Lead off electrostatic charges.
Conditions for safe storage:
Keep only in the original container.
Further information on storage conditions:
Store in a cool, dry, well-ventilated area.
Keep container sealed when not in use.
Store away from flammable or combustible materials.
Shipping and Storage of Polyglykol 12000 S:
When Polyglykol 12000 S is stored in a cold, dry place in a closed container Polyglykol 12000 S and 12000 P can be kept for at least two years.
Stability and Reactivity of Polyglykol 12000 S:
Reactivity:
No dangerous reaction known under conditions of normal use.
Chemical stability:
Stable under normal conditions.
Possibility of hazardous reactions:
Polyglykol 12000 S is not a dust explosion risk as supplied.
However the build-up of fine dust can lead to a risk of dust explosions.
Conditions to avoid:
Keep away from heat.
Keep away from flames and sparks.
Incompatible materials:
not known.
Hazardous decomposition products:
When handled and stored appropriately, no dangerous decomposition products are known.
First Aid Measures of Polyglykol 12000 S:
General advice:
Remove/ Take off immediately all contaminated clothing.
Get medical advice/ attention if you feel unwell.
If inhaled:
Move the victim to fresh air.
Give oxygen or artificial respiration if needed.
Get immediate medical advice/ attention.
Never give anything by mouth to an unconscious person.
In case of skin contact:
Wash thoroughly with soap and water for 15 minutes.
If skin irritation occurs, seek medical attention.
In case of eye contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
If swallowed:
Immediately call a POISON CENTER/ doctor.
Most important symptoms and effects, both acute and delayed:
The possible symptoms known are those derived from the labelling.
No additional symptoms are known.
Notes to physician:
None known.
Firefighting Measures of Polyglykol 12000 S:
Suitable extinguishing media:
Water spray jet
Alcohol-resistant foam
Unsuitable extinguishing media:
Dry powder
Carbon dioxide (CO2)
High volume water jet
Specific hazards during firefighting:
In case of fires, hazardous combustion gases are formed:
Carbon monoxide (CO)
Carbon dioxide (CO2)
Burning produces noxious and toxic fumes.
Avoid generating dust.
Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Routine housekeeping should be instituted to ensure that dusts do not accumulate on surfaces.
Take measures to prevent the build up of electrostatic charge.
Ground/bond container and receiving equipment.
Further information:
Exercise caution when fighting any chemical fire.
Use NIOSH approved self-contained breathing apparatus and full protective clothing.
Special protective equipment for firefighters:
Wear an approved positive pressure self-contained breathing apparatus in addition to standard fire fighting gear.
Accidental Release Measures of Polyglykol 12000 S:
Personal precautions, protective equipment and emergency procedures:
Avoid contact with skin, eyes and clothing.
Wash thoroughly after handling.
Wearing appropriate personal protective equipment, contain spill, ventilate area of spill or leak.
Collect onto inert absorbent.
Place in suitable container.
Environmental precautions:
Polyglykol 12000 S should not be allowed to enter drains, water courses or the soil.
Methods and materials for containment and cleaning up:
Take up mechanically.
Identifiers of Polyglykol 12000 S:
Trade name: POLYGLYKOL 12000 S
Material number: 107899
CAS number: 25322-68-3
Synonyms: Product Has No Synonyms
Chemical family: Polyethylene glycol, HO-(CH2-CH2-O)n-H, average molecular mass 12000
INCI Names: PEG-240
Synonym(s): PEG
Linear Formula: H(OCH2CH2)nOH
CAS Number: 25322-68-3
MDL number: MFCD00081839
PubChem Substance ID: 24887736
NACRES: NA.23
Composition:
Polyethylene glycol
H(OCH2CH2)nOH
n = 220
CAS-No.: 25322-68-3
INCI-description: PEG-220
Physical and Chemical Properties of Polyglykol 12000 S:
Appearance: flakes
Colour: white
Odour: characteristic
Odour Threshold: not determined
pH: 5 - 7 (68 °F / 20 °C)
Concentration: 100 g/l
Melting point: 133 - 140 °F / 56 - 60 °C
Boiling point: no data available
Flash point: 473 °F / 245 °C
Evaporation rate: not determined
Vapour pressure: < 0.01 mbar (68 °F / 20 °C)
Relative vapour density: Not applicable
Density: approx. 1.2 g/cm3 (68 °F / 20 °C)
Bulk density: 400 - 500 kg/m3
Solubility(ies)
Water solubility: approx. 500 g/l (68 °F / 20 °C)
Partition coefficient: noctanol/water: log Pow: < -1
Auto-ignition temperature: > 608 °F / > 320 °C
Decomposition temperature: 680 °F / 360 °C
Viscosity:
Viscosity, dynamic: 1,100 - 1,400 mPa.s (68 °F / 20 °C)
Viscosity, kinematic: 1000 - 1300 mm2/s (68 °F / 20 °C)
Metal corrosion rate: Not applicable
Particle size: no data available
Quality Level: 200
Form: powder
Mol wt: 11,000-15,000
mp: 64-65 °C
Ω-end: hydroxyl
α-end: hydroxyl
SMILES string: C(CO)O
InChI: 1S/C2H6O2/c3-1-2-4/h3-4H,1-2H2
InChI key: LYCAIKOWRPUZTN-UHFFFAOYSA-N
Water content: % m/m max. 0.5
Colour index (25 % in water)Ç max. 30
pH ( 5 % w/w in water): 5 – 7
Hydroxyl number mg KOH/g: 7.5 – 11
Molecular weight g/mol: 10500 – 15000
Solidification poin °C: 55 – 60
Viscosity at 20°C (50 % w/w in water) mPas: 1100 – 1400
Flash point °C: 245
Ignition temperature °C: >320
Ethyleneoxid ppm max.: 1
Dioxane ppm max.: 1
Other Descriptions of Polyglykol 12000 S:
Claims:
Binders
Humectants
Moisturizing Agents
Solubilizers
Thickeners & Stabilizers
Moisturizing
Non-irritant
Softness
Product Type:
Solvents > Glycols & Glycol Ethers > Ethylene Glycols
Plasticizers
Humectants
Chemical Composition:
Polyethylene glycol
Physical Form:
Flakes
Appearance:
White
Product Status:
COMMERCIAL
Applications/ Recommended for:
Coatings
Chemical Name:
Polyethylene glycol, average molar mass 12000 g/mol
Physical appearance:
Flakes
Quality status
Excipient, IPEC GMP; Kosher certificate
Application function:
Solvent, Binder
Product Function:
Humectant
Chemical Type:
Polyethylene glycol
Other Polyglykol Products:
Polyglykol 1000
Polyglykol 1000 SG VITA
Polyglykol 10000 S
Polyglykol 10000 SG
Polyglykol 1500 FL PU
Polyglykol 1500 S
Polyglykol 2000 PU
Polyglykol 2000 S
Polyglykol 300
Polyglykol 400
Polyglykol 4000 S
Polyglykol 600
Polyglykol 600 PU
Polyglykol 6000 P
Polyglykol 8000 P
Polyglykol 8000 S
Polyglykol 9000 S
Polyglykol AM 1100
Polyglykol AM 250
Polyglykol AM 450
Polyglykol D 21/150
Polyglykol D 21/300
Polyglykol D 21/700
Polyglykol G 500
Polyglykol M 1000
Polyglykol M 2000 FL
Polyglykol M 2000 S
Polyglykol M 350
Polyglykol M 350 PU
Polyglykol M 500
Polyglykol M 500 PU
Polyglykol M 750
Polyglykol M 750 PU
Polyglykol 10000 FL
Polyglykol 1500 FL
Polyglykol 1500 PS
Polyglykol 200 LVC
Polyglykol 2000 FL
Polyglykol 3400 FL
Polyglykol 3400 PS
Polyglykol 4000 PS
Polyglykol 4000 FL
Polyglykol 4000 M50
Polyglykol 4000 P
Polyglykol 4000 PF
Polyglykol 4000 PSK
Polyglykol 6000 FL
Polyglykol 6000 PF
Polyglykol 6000 PS
Polyglykol 8000 FL
Polyglykol 8000 PF
Polyglykol 8000 PS
Polyglykol 9000 FL
Polyglykol A 11/1800
Polyglykol A 32/550
Polyglykol A 400
Polyglykol A 500
Polyglykol PR 600
