Quick Search
ATAMAN Chemicals
Polyglykol 2000 FL
Polyglykol 2000 S
CAS Number: 25322-68-3
EC Number: 500-038-2
Composition: Polyethylene glycol
H(OCH2CH2)nOH
n = about 45
CAS Number: 25322-68-3
INCI designation: PEG-40
Product properties of Polyglykol 2000:
Polyglykol 2000 is a white waxy solid at room temperature.
Polyglykol 2000 FL can be supplied in heated tank trucks.
CHEMICAL NAME:
Polyethylene glycol, average molar mass 2000 g/mol
Polyglykol 2000 S is a flaked type available in 20 kg bags or super sacs with up to 500 kg capacity.
Polyglykol 2000's two hydroxy end groups as well as its ether groups mainly control the physical and chemical properties of Polyglykol 2000.
Therefore Polyglykol 2000 is soluble in water and polar organic solvents like aceton or methanol.
Polyglykol 2000 is insoluble in pure hydrocarbons.
Polyglykol 2000 displays typical chemical reactions of alcohols/diols.
The solidification point, of Polyglykol 2000 is about 50 °C.
Storage of Polyglykol 2000:
When Polyglykol 2000 stored in a cold, dry place in a closed container.
Polyglykol 2000 S can be kept for at least two years.
Applications of Polyglykol 2000:
Based on their physical and chemical characteristics:
-polyethylene glycols are used for a wide variety of applications.
Polyglykol M 2000 is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG) that is completely water soluble.
Benefits of Polyglykol 2000:
Polyglykol 2000 has a low diol content to limit formation of crosslinking diesters.
Polyglykol 2000 is completely water soluble.
PRODUCT FUNCTION:
Intermediate
APPLICATIONS:
Lubes and Greases
Industrial Lubrication
Paint additive manufacturing
Construction
Grinding Aids
Concrete Admixture
Dry mix mortars
Plaster Boards
Superplasticizer
Polyglykol 2000 S is a non-volatile solvent, release agent, lubricant and plasticizer.
Polyglykol 2000 is a polyethylene glycol with a mean molecular weight of 2000.
Polyglykol 2000 is a pasty material with a low melting range.
Polyglykol 2000 shows typical chemical reactions of alcohols/diols and a very low evaporation rate.
Polyglykol 2000 exhibits outstanding toxicological safety, solubility in water and very low water content.
Polyglykol 2000 is compatible with hard water, cellulose, polyester, rubber, elastomer and polyurethane.
Polyglykol 2000 FL is a polyethylene glycol grade suitable for use in cellulose films and paints.
Polyglykol 2000 acts as a solvent, humectant and plasticizer.
Polyglykol 2000 shows typical chemical reactions of alcohols/diols and a very low evaporation rate.
Polyglykol 2000 FL is available as a yellow liquid.
Polyglykol 2000 is soluble in water and polar organic solvents like acetone or methanol.
Polyglykol 2000 is insoluble in pure hydrocarbons.
Polyglykol 2000 is compatible with cellulose, polyester and polyurethane.
Polyglykol 2000 S is a polyethylene glycol that is used for a wide variety of applications including: reactive diol/polyether component in polyester or polyurethene resins; component of auxiliaries for leather and textile processing; cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste); lubricant and mould release agent for rubber, plastic and elastomer processing; plasticizer and binder for ceramic and concrete manufacturing; component of lubricant formulations; water soluble, lubricating component in metalworking fluids; humectant for paper, wood and cellulose films; solvent and humectant for dyes and inks; modifier for production of regenerated viscose; humectant and plasticizer for adhesives; and heat transfer medium.
Polyglykol 2000 S is a flaked type, and it has a molecular weight of 1800 – 2200g/mol.
Fields of applications of Polyglykol 2000:
- Reactive diol/polyether component in polyester or polyurethene resins
- Component of auxiliaries for leather and textile processing
- Cosmetic / pharmaceutical formulations (e.g. humectant or plasticiser for creams, tablets, tooth paste)
- Lubricant and mould release agent for rubber,plastic and elastomer processing
- Plasticizer and binder for ceramic and concrete manufacturing
- Component of lubricant formulations
- Water soluble, lubricating component in metalworking fluids
- Humectant for paper, wood and cellulose films
- Solvent and humectant for dyes and inks
- Modifier for production of regenerated viscose
- Humectant and plasticizer for adhesives
Applications of Polyglykol 2000:
Polyglykol M 2000 is a raw material for 3rd generation superplasticizers.
These characteristics are guidance only and not be taken as product specifications.
The tolerances are given in the product specification sheet.
For further product properties, specifications, safety and ecological data , please refer to the MSDS.
Physicochemical Information of Polyglykol 2000:
Density: 1.21 g/cm3 (20 °C)
Flash point: 138.6 °C
Ignition temperature: 420 °C
Melting Point: 57.5 °C
pH value: 4 - 7 (100 g/l, H₂O, 20 °C)
Vapor pressure: <0.1 hPa (20 °C)
Viscosity kinematic: 46 - 55 mm2/s (20 °C) (50% solution)
Bulk density: 400 - 500 kg/m3
Solubility: 600 g/l
Product data of Polyglykol 2000:
water content (DIN 51777) % m/m:
max. 0.5 (S type)
max. 0.1 (FL type)
colour index [APHA] (EN 1557) (25 % in water):
max. 30
pH ( 5 % w/w in water) (DIN EN 1262):
5 – 7
hydroxyl number (DIN 53240) mg KOH/g:
51 – 62
molecular weight g/mol:
1800 – 2200
solidification point (EP III) °C:
48 – 52
viscosity at 20°C (50 % w/w in water) (DIN 51562) mPas:
50 – 58
flash point (DIN 51376) °C:
265
ignition temperature (DIN 51794) °C:
>320
ethylene oxide ppm:
max. 1
dioxane ppm:
max. 1
Polyglykol 2000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions.
The flaked form enables easier handling of the material within production.
Polyglykol 2000 is specified according to the requirements of the main international ICH guidelines and monographs.
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses.
It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application.
Any existing industrial property rights must be observed.
The quality of our products is guaranteed under our General Conditions of Sale.
