PRODUCTS

POLYGLYKOL 8000 P

CAS Number: 25322-68-3
EC Number: 500-038-2
MDL number: MFCD00081839
Formula: (C2H4O)nH2O

Polyglykol 8000 P is a polethylene glycol with a mean molecular weight of 8000.
Acts as a solvent and plasticizer.
Shows typical chemical reactions of alcohols/diols and a very low evaporation rate.
Polyglykol 8000 P is a yellow solid in fine powder form.

Polyglykol 8000 P is soluble in water and polar organic solvents like acetone or methanol.
Polyglykol 8000 P is insoluble in pure hydrocarbons.
Polyglykol 8000 Pis compatible with cellulose, rubber, polyester and polyurethane.
Suitable for use in papers, adhesives and sealants.

Polyglykol 8000 P is a polethylene glycol with a mean molecular weight of 8000.
Polyglykol 8000 Pis a solid in powder form.
Polyglykol 8000 P is a milled PEG excipient grade powder product, produced under IPEC GMP conditions.
Polyglykol 8000 P supports the homogeneous mixing with other materials within production.

Polyglykol 8000 P is specified according to the requirements of the main international ICH guidelines and monographs.
Polyglykol 8000 P is a powdered type, and Polyglykol 8000 P has a molecular weight of 7300 – 9000g/mol.
Polyglykol 8000 P is a polyethylene glycol-based solvent, humectant and plasticizer.
Polyglykol 8000 P possesses very low water content and good solubility in water.

Polyglykol 8000 P is suitable for paints and coatings.
Polyglykol 8000 P is a non-volatile solvent, release agent, lubricant and plasticizer.
Polyglykol 8000 P is a polyethylene glycol with a mean molecular weight of 8000.
Polyglykol 8000 P shows typical chemical reactions of alcohols/diols and a very low evaporation rate.

Polyglykol 8000 P is compatible with hard water, cellulose, polyester, rubber, elastomer and polyurethane.
Polyglykol 8000 P is a polethylene glycol with a mean molecular weight of 8000.
Polyglykol 8000 P is a solid in powder form.
The physical and chemical properties of polyethylene glycols are mainly determined by the two hydroxyl end groups, the ether groups as well as the molecular weight.

Polyglykol 8000 P is a yellowish wax-like solid at room temperature.
Polyglykol 8000 P is soluble in water and polar organic solvents like acetone or methanol.
Polyglykol 8000 P is insoluble in pure hydrocarbons.
Polyglykol 8000 P shows typical chemical reactions of alcohols/diols and a very low evaporation rate.

The solidification point of Polyglykol 8000 P is about 58 °C.
Polyglykol 8000 P by Clariant is a non-volatile solvent, release agent, lubricant and plasticizer.
Polyglykol 8000 P is a polyethylene glycol with a mean molecular weight of 8000.

Polyglykol 8000 P shows typical chemical reactions of alcohols/diols and a very low evaporation rate.
Polyglykol 8000 P has very low water content and outstanding toxicological safety.
Polyglykol 8000 P is compatible with hard water, cellulose, polyester, rubber, elastomer and polyurethane.

USES and APPLICATIONS of POLYGLYKOL 8000 P:
-Hair Conditioner
-Cleaning Agent
-Bath Oils
-Tablets & Salts

-Hair Styling Products
-Detanglers
-Antiperspirants & Deodorants
-Anti-Aging Products

-Cosmetics
-Detergents in the form of tablets
-Production of packaging
-Metalworking

-Construction industry
-Textile industry
-Processing of plastics and elastomers
-Production of ceramics
-Coatings

-Polyglykol 8000 P is a polyethylene glycol that is used for a wide variety of applications including:
*Reactive diol/polyether component in polyester or polyurethene resins
*Component of auxiliaries for leather and textile processing
*Cosmetic / pharmaceutical formulations (e.g. humectant or solubilizer for creams, shampoos, tooth paste)

*Lubricant and mould release agent for rubber, plastic and elastomer processing
*Plasticizer and binder for ceramic and concrete manufacturing
*Component of lubricant formulations
*Water soluble, lubricating component in metalworking fluids

*Humectant for paper, wood and cellulose films
*Solvent and humectant for dyes and inks
*Modifier for production of regenerated viscoses
*Humectant and plasticizer for adhesives.

-Washing powders and tabs
-Dissolving aids
-Tabletting and granulation auxiliaries
-Binding agents
-Toilet blocks.

-Reactant:
Reactive diol/polyether component in polyester or polyurethane resins
-Solvent / Humectant / Plasticizer:
Paper, wood, cellulose films, inks, paints, coatings, adhesives, sealants, concrete

-Release agent:
Lubricant mould release agent for rubber and elastomer processing, lubricant formulations, metal working fluids
-Binder for ceramics
-Component of auxiliaries for fiber, textile and leather processing

-Heat transfer medium
-Polyglykol 8000 P by Clariant is a polyethylene glycol-based solvent, humectant and plasticizer.
Polyglykol 8000 P possesses very low water content and good solubility in water.

PRODUCT TYPE of POLYGLYKOL 8000 P:
*Humectants
*Plasticizers
*Solvents > Glycols & Glycol Ethers > Ethylene Glycols
*Lubricants / Waxes
*Other Additives for Liquid Systems > Solvents > Glycols
*Plasticizers
*Release Agents

BENEFITS of POLYGLYKOL 8000 P:
-Good solubility in water
-Very low water content
-Compatible with hard water
-Non-volatile
-Outstanding toxicological safety

FUNCTION of POLYGLYKOL 8000 P:
-Binder
-Carrier
-Anti-Static Agent
-Moisturizing Agent
-Humectant
-Plasticizer
-Solvent
-Solubilizer
-Slip Agent
-Viscosity Modifier

PHYSICAL and CHEMICAL PROPERTIES of POLYGLYKOL 8000 P:
Physical: state solid
Color: No data available
Odor: No data available
Melting point/range: 61 - 64 °C
Initial boiling point and boiling range: > 325 °C
Flammability (solid, gas): No data available

Upper/lower flammability or explosive limits: No data available
Flash point: No data available
Autoignition temperature: 305 °C
Decomposition temperature: No data available
pH: No data available
Viscosity
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available

Water solubility: No data available
Partition coefficient: n-octanol/water: No data available
Vapor pressure: < 0,01 hPa at 20 °C
Density: 1,027 g/cm3
Relative density: No data available
Relative vapor density: No data available

Relative molar mass [Dalton]: 7000 – 9000
Appearance: white powder
Hazen color, 25 % in water max.: 30
Solidification point [°C]: 55 – 61
Hydroxyl number [mg KOH/g]: 12 – 16
Viscosity, 20 °C, 50 % in water [mPas]: 290 – 450
Water (Karl Fischer method) [%]: max. 0.5
pH value, 5 % in water: 5.0 - 7.0
Solubility in water dissolves to a clear solution.

FIRST AID MEASURES of POLYGLYKOL 8000 P:
-Description of first-aid measures:

*If inhaled:
If breathed in, move person into fresh air.

*In case of skin contact:
Wash off with soap and plenty of water.

*In case of eye contact:
Flush eyes with water as a precaution.

*If swallowed:
Rinse mouth with water.

-Indication of any immediate medical attention and special treatment needed:
No data available

ACCIDENTAL RELEASE MEASURES of POLYGLYKOL 8000 P:
-Environmental precautions:
No special environmental precautions required.

-Methods and materials for containment and cleaning up:
Sweep up and shovel.
Keep in suitable, closed containers for disposal.

FIRE FIGHTING MEASURES of POLYGLYKOL 8000 P:
-Extinguishing media:
*Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

-Advice for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.
-Further information:
No data available

EXPOSURE CONTROLS/PERSONAL PROTECTION of POLYGLYKOL 8000 P:
-Control parameters:
*Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:

*Eye/face protection:
Use equipment for eye protection.

*Skin protection:
Handle with gloves.
Gloves must be inspected prior to use.
Wash and dry hands.

Full contact:
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min

Splash contact:
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min

*Respiratory protection:
Respiratory protection is not required.

*Control of environmental exposure:
No special environmental precautions required.

HANDLING and STORAGE of POLYGLYKOL 8000 P:
-Precautions for safe handling:
*Hygiene measures:
General industrial hygiene practice.

-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Keep container tightly closed in a dry.
Store in cool place.

-Specific end use(s):
No other specific uses are stipulated.

STABILITY and REACTIVITY of POLYGLYKOL 8000 P:
-Reactivity: No data available
-Chemical stability: Stable under recommended storage conditions.