Quick Search
CAS NO:9003-07-0
EC NO:618-352-4
Polypropylene fiber 6 mm polypropylene of with 6 mm cut length.
polypropylene fiber 6 mm prevent crack formation and provide reinforcement. They are mainly used in plasters for finishing coat or ornamental castings for crack prevention as well as additional reinforcement. Suitable care has been taken to insure dispersion of fibres for hand mixing of mortar.
-Crack control techonology,
-suitable for Plasters, shotcrete, Mortar and precast cement and concrete application
-Polypropylene fiber 6 mm adds tensile reinforcement and ductility in cement articles, precast concrete and FRC
-Prevent crack formation,provide reinforcement,used in final coat plaster,in ornamental coating
-Eco-Friendly, Non-Allergenic, Heat-Resistant, Abrasion-Resistant, Anti-Distortion, Alkali Resistant, Easily Dispersible
Chemical Properties
Translucent, white solid.Tensile strength 5000 psi, flexural strength 7000 psi, usable up to 121C. Insoluble in cold organic solvents; softened by hot solvents. Maintains strength after repeated flexing. Degraded by heat and light unless protected by antioxidants. Readily colored; good electrical resistance; low water absorption and moisture permeability; resists strong acids and alkalies up to 60C, but is attacked by chlorine, fuming nitric acid, and other strong oxidizing agents. Combustible, but slow-burning. Fair abrasion and good heat resis- tance if properly modified. Can be chrome-plated, injectionand blow-molded, and extruded.
Chemical Properties
Polypropylene fiber 6 mm is a low-density resin that offers a good balance of thermal, chemical, and electrical properties, along with moderate strength. Strength can be significantly increased by using reinforcing agents such as glass fiber.
Polypropylene fiber 6 mm has limited heat resistance, but it can be used in applications that must withstand boiling water or steam sterilization.
Polypropylene fiber 6 mm can resist chemical attack and are unaffected by aqueous solutions of inorganic salts or mineral acids and bases, even at high temperatures. They are not attacked by most organic chemicals, and there is no solvent for these resins at room temperature. The resins are attacked, however, by halogens, fuming nitric acid, other active oxidizing agents, and by aromatic and chlorinated hydrocarbons at high temperatures .
Polypropylene fiber 6 mm is translucent and autoclavable. Properties can be improved by compounding with fillers, by blending with synthetic elastomers, and by copolymerizing with small amounts of other monomers.
Uses
Polypropylene fiber 6 mm is a thermoplastic material used in a wide variety of applications including packaging, labeling, textiles, etc. Due to high processability and low cost, Polypropylene fiber 6 mm is one of the most extensively produced polymers, especially, for auto industry.
Polypropylene fiber 6 mm is resistant to photo-oxidation and thermal oxidation at moderate temperatures. However, Polypropylene fiber 6 mm is sensitive to various external aging environments (such as heat, light, and radiation), and, hence, has a relatively low service temperature.When PP is exposed to high temperatures or to an irradiation environment, the tertiary hydrogen atoms present in PP chains are susceptible to be attacked by oxygen.
Polypropylene fiber 6 mm is well known that PP oxidation depends on both light and temperature in outdoor aging conditions.
Polypropylene fiber 6 mm can also be photo-degraded because several molecular chains are affected in the wavelength range from 310 to 350 nm.
Uses
Used with ram- and screw-injection machines. For automotive, housewares, general molding products and multi- and monofiliment fiber.
Uses
General extrusion grade polymer.
Uses
Base polymer in hot melt adhesives and paper-laminating, extender and viscosity modifier in caulks and sealants and waterproofing agent in wire and cable applications.
Uses
Modifier for waxes to reduce blocking, scuffing and abrasion. Improves pigment dispersion in polypropylene films and fibers.
Definition
ChEBI: A polymer compose of repeating propane-1,2-diyl units.
A Polypropylene fiber 6 mm mesh laminated with unreinforced vulcanized silastic sheeting.
Propylene or propene polymers. Thermoplastics that can be extruded into fibers, films or solid forms. They are used as a copolymer in plastics, especially polyethylene. The fibers are used for fabrics, filters and surgical sutures.
Physical and Chemical Properties
non-toxic, tasteless, small degree, strength and stiffness, hardness and heat resistance are better than low-pressure polyethylene, can be used at about 100 degrees.
Polypropylene fiber 6 mm has good electrical properties and high-frequency insulation is not affected by humidity, but low temperature time-varying brittleness, not wear-resistant, easy to aging. Suitable for making general mechanical parts, corrosion-resistant parts and insulating parts. Common acid and alkali organic solvents have little effect on it, and can be used in food.
Use
For the production of extrusion film, composite film plastic products
Polypropylene fiber 6 mm is a kind of linear polymer synthetic fibre obtained from propylene polymerization.
Polypropylene fiber 6 mm has some advantages such as light weight, high strength, high toughness, and corrosion resistance.
The Polypropylene fiber 6 mm is widely used in chemical industry, energy, clothing, environmental protection, and construction
Polypropylene fiber 6 mm have certain features that make them an ideal complement to achieve specific advantages when used for building works, more specifically, when added to concrete.
They mainly comprise continuous or discontinuous polypropylene fibres arranged within a plastic matrix. Below are some of the reasons why Polypropylene fiber 6 mm is used as a reinforcement material:
Good value for money.
Versatility: compatible with most existing processing techniques and used in different applications.
Because they are the plastic material with the lowest specific weight, lower amounts of material are required to obtain the finished product.
Mechanical properties: polypropylene can achieve a good impact/stiffness balance.
Chemical properties: excellent chemical resistance to common solvents.
Good dimensional stability when exposed to high temperatures.
Vapour barrier: prevents the transfer of moisture.
Polypropylene fibres are used in the following applications:
Industrial pavements.
Highly resistant concrete. Industrial grounds.
Tunnels.
Roads.
Special mortars.
Precast concrete.
Among the advantages of using polypropylene fibres for reinforcement purposes are:
More cost effective, fast and easy to use alternative to mesh as a reinforcement method.
Reduces the formation of retraction and contraction cracks.
Saves time during the construction process as it can be applied directly after combining with concrete.
Lower labour costs due to requiring less steps during the execution of the building works.
Provides a secondary, uniform reinforcement.
Easy to mix with concrete at both on site and at the manufacturing plant.
Non corrosive and non magnetic material.
Provides added tenacity to structures.
Increased impact resistance while preventing erosion.
Provides safety at building works.
Provides 3D strengthening.
High traction resistance.
Polypropylene fiber 6 mms are a set of synthetic fibres with certain features that make them a great addition to construction materials, especially when concrete is needed.
Polypropylene fiber 6 mms are usually made up of either continuous or discontinuous Polypropylene fiber 6 mm arranged on a plastic matrix, and used as a reinforcement material.
The Benefits of Polypropylene fiber 6 mm
Polypropylene fiber 6 mm can present a lot of different benefits:
A cost-effective way to achieve high-strength concrete and other construction materials
Is compatible with many processing techniques, which means there are many applications of polypropylene
Offer great chemical resistance to a lot of common solvents
Thanks to its mechanical properties it can get a good balance between stiffness and impact
Is resistant to freeze-thaw weathering
Has low moisture regain, making it a good choice even for humid environments
Common Applications for Polypropylene fiber 6 mm
Polypropylene fiber 6 mm is often added to the cement matrix to improve the resistance of concrete. Fibre reinforced concrete is much more durable thanks to an enhanced tensile strength and less likely to crack when compared to plain concrete.
Polypropylene fiber 6 mm is a tan to white odorless solid. Less dense than water and insoluble in water. Hence floats on water.
Propylene or propene polymers. Thermoplastics that can be extruded into fibers, films or solid forms. They are used as a copolymer in plastics, especially polyethylene. The fibers are used for fabrics, filters and surgical sutures.
Polypropylene fiber 6 mm is available as molding powder, extruded sheet, cast film, textile staple, and continuous filament yarn. Manufactured products include packaging film, wire and cable coatings, food containers, plastic pipe, wearing apparel, and reinforced plastics; also molded parts for automobiles, appliances, and housewares.
IUPAC names
1-Propene, homopolymer
12-[(2S,3R)-3-octyloxiran-2-yl]dodecanoic acid
Not available
poly(propene)
polypropene
POLYPROPYLENE
Polypropylene
polypropylene
Polypropylene homopolymer
SYNONYMS:
1730723 [Beilstein]
18936-17-9 [RN]
201-142-8 [EINECS]
210-884-1 [EINECS]
242-687-1 [EINECS]
2492-33-3 [RN]
2-methyl butane
2-methylbutane
PROPYLENE RESIN
PROPYLENE, ISOTACTIC RESIN
POLYPROPYLENE
POLYPROPYLENE, ATACTIC
POLYPROPYLENE, PSS NANOREINFORCED
POLYPROPYLENE, ISOTACTIC
Polypropylene master batch,flame retarding
Polypropylene,film grade
Polypropylene FDY
Polypropylene full drawn yarn
Modified polypropylene for automobile
Polypropylene,flame retarding
Polypropylene filter silk oil for tobacco
Polypropylene,powder
Polypropylene,homopolymerization
Polypropylene resin, inorganic filler
Polypropylene fiber
Polypropylene,anti-weathering
Polypropylene,reinforced
RPP
Polypropylene,fiber grade
Polypropylene,modified
enjaye11s
Epolene N-15
epolenem5h
epolenem5k
epolenem5w
escon622
esconcd44a
esconex375
f080pp
Fiberfil J-60/30/E8
Fiberfil J-60/30/FR
Fiberfil PP-60/TC/40
Fiberil M-1492
Fortilene
Fortilene 1001
Fortilene 1602
Fortilene 1802
Fortilene 2104
Fortilene 3151
Fortilene 4104, 4109
Fortilene 4209
Fortilene 5801
Fortilene 9000
Fusabond MZ-109D
Fusabond MZ-203D
gerfil
gpcd398
