PRODUCTS

PREVENTOL CMK 40

Preventol CMK 40 is liquid alkaline preparation based on chlorocresol.
For the preservation of concrete additives, metalworking fluids, textile auxiliaries, thickener solutions, adhesives (including protein-based formulations) and glues, knifing fillers, aqueous coatings etc.
The product has a broad and balanced spectrum of activity covering gram-positive and gram-negative bacteria, mould and yeast.
Particularly effective against putrefactive bacteria and therefore suitable for use in products which are difficult to preserve (e.g. protein-based formulations).

CAS Number: 59-50-7
EC Number: 200-431-6
Molecular Formula: C7H7ClO

Other names: Chlorocresol, Chlorocresol, chlorocresol, chlorocresol; 4-chloro-m-cresol; 4-chloro-3-methylphenol, chlorocresol;4-chloro-m-cresol;4-chloro-3-methylphenol, Phenol, 4-chloro-3-methyl-, 4-chlor-3-methylfenol (cs), 4-Chlor-3-methylphenol (de), 4-chlor-3-metilfenolis (lt), 4-Chlor-m-kresol (de), 4-chlor-m-krezolis, (lt), 4-chloro-3-metylofenol (pl), 4-chloro-3-méthylphénol (fr), 4-chloro-m-crésol (fr), 4-chloro-m-krezol (pl), 4-chlór-3-metylfenol (sk), 4-chlór-meta-krezol (sk), 4-clor-3-metilfenol (ro), 4-clor-m-cresol (ro), 4-cloro-3-metilfenol (es), 4-cloro-3-metilfenol (pt), 4-cloro-m-cresol (es), 4-cloro-m-cresol (pt), 4-hlor-3-metilfenols (lv), 4-hlor-m-krezols (lv), 4-kloori-3-metyylifenoli (fi), 4-klor-3-metylfenol (no), 4-klor-3-metylfenol (sv), 4-klor-m-kresol (no), 4-kloro-3-metil-fenol (hr), 4-kloro-3-metilfenol (sl), 4-kloro-3-metüülfenool (et), 4-kloro-m-kresool (et), 4-kloro-m-krezol (hr), 4-kloro-m-krezol (sl), 4-klór-3-metilfenol (hu), 4-klór-m-krezol (hu), 4-хлоро-3-метилфенол (bg), 4-хлоро-m-крезол (bg), Chloorkresol (nl), chloorkresol (nl), chlorcresol (da), chlorkresol (cs), Chlorkresol (de), Chlorkrezolis (lt), chlorkrezolis (lt), chlorocresol (da), Chlorocresol (no), Chlorocrésol (fr), chlorocrésol; 4-chloro-m-crésol; 4-chloro-3-méthylphénol (fr), Chlorokresol (de), Chlorokresol (pl), chlórkrezol (sk), clor crezol (ro), Clorocresol (es), clorocresol (es), Clorocresol (pt), clorocresol (pt), Clorocresolo (it), clorocresolo (it), Clorocrezol (ro), Hlorkrezols (lv), hlorkrezols (lv), kloorikresoli (fi), klorkresol (no), klorkresol (sv), Klorokresol (mt), Klorokresol (sv), Klorokresool (et), Klorokrezol (hr), klorokrezol (hr), Klorokrezol (hu), Klorokrezol (sl), klorokrezol (sl), klórkrezol (hu), χλωροκρεζόλη (el), Χλωροκρεσόλη (el), Хлорокрезол (bg), хлорокрезол (bg), Phenol, 4-chloro-3-methyl-, 4-Chlor- 3-methylphenol, 4-Chlor-3-methylphenol, 4-chloro-3-methyl phenol, 4-Chloro-3-methylphenol, 4-chloro-3-methylphenol, 4-Chloro-m-cresol, 4-chloro-m-cresol, 4-cloro-3-metilfenol, Chlorkresol, Chlorocresol, chlorocresol, chlorocresol, Phenol, 4-chloro-3-methyl-, 59-50-7, 604-014-00-3, 4-Chloro-3-methylphenol, Chlorocresol, 59-50-7, 4-Chloro-m-cresol, p-Chloro-m-cresol, Phenol, 4-chloro-3-methyl-, Parol, p-Chlorocresol, 4-Chloro-3-cresol, Ottafact, Baktol, Candaseptic, 2-Chloro-5-hydroxytoluene, Baktolan, Parmetol, Peritonan, Raschit, Aptal, Rasen-Anicon, 4-Chloro-5-methylphenol, PCMC, Preventol CMK, Raschit K, p-Chlor-m-cresol, 6-Chloro-3-hydroxytoluene, 3-METHYL-4-CHLOROPHENOL, 2-Chloro-hydroxytoluene, Parachlorometacresol, Chlorocresolum, 4-Chloro-3-methyl phenol, m-Cresol, 4-chloro-, Rcra waste number U039, NSC 4166, para-Chloro-meta-cresol, CHEBI:34395, NSC-4166, MFCD00002323, 1-Chloro-2-methyl-4-hydroxybenzene, NCGC00091338-01, Chlorcresolum, Chlorkresolum, Chlorocresolo, Chlorokresolum, Perol, 36W53O7109, DSSTox_CID_1717, Chloro-3-cresol, DSSTox_RID_76291, DSSTox_GSID_21717, Clorocresolo [DCIT], Clorocresol [Spanish], Caswell No. 185A, Chlorocresolum [Latin], Clorocresol, Clorocresolo, Clorocresol [INN-Spanish], CAS-59-50-7, Chlorocresolum [INN-Latin], CCRIS 1938, 4-chloro-meta-cresol, HSDB 5198, 4-Chloro-1-hydroxy-3-methylbenzene, EINECS 200-431-6, 4-chloro-3-methyl-phenol, RCRA waste no. U039, EPA Pesticide Chemical Code 064206, BRN 1237629, Lysochlor, Chlorocresol [USAN:INN], AI3-00075, Chlorocresol, NF, UNII-36W53O7109, Spectrum_000130, 2p7a, 4-chlor-3-methylphenol, Chlorocresol (NF/INN), Spectrum2_000002, Spectrum4_000278, Spectrum5_000705, CHLOROCRESOL [II], CHLOROCRESOL [MI], 4-chloro-5-methyl-phenol, CHLOROCRESOL [INN], WLN: QR DG C, CHLOROCRESOL [HSDB], CHLOROCRESOL [USAN], EC 200-431-6, SCHEMBL12344, CHLOROCRESOL [MART.], KBioGR_000776, KBioSS_000590, MLS002152924, BIDD, CHLOROCRESOL [WHO-DD], CHLOROCRESOL [WHO-IP], DivK1c_000768, Phenol, 4-chloro-5-methyl-, SPECTRUM1500178, SPBio_000003, ZINC1124, CHEMBL1230222, DTXSID4021717, 4-Chloro-3-methylphenol, 99%, HMS502G10, KBio1_000768, KBio2_000590, KBio2_003158, KBio2_005726, NSC4166, NINDS_000768, P-CHLORO-M-CRESOL [INCI], HMS1920O03, HMS2091C14, HMS3652F13, HMS3885P09, Pharmakon1600-01500178, CHLOROCRESOL [EP MONOGRAPH], HY-B1284, Tox21_111116, Tox21_201293, Tox21_300054, BDBM50527069, CCG-39979, HSCI1_000352, NSC756680, s4209, STL268900, CHLOROCRESOLUM [WHO-IP LATIN], AKOS000120242, Tox21_111116_1, CS-4678, NSC-756680, Chlorocresol (4-Chloro-3-methylphenol), IDI1_000768, NCGC00091338-02

Preventol CMK 40 is an anionic, preservative for adhesives (including protein-based formulations) and glues.
Preventol CMK 40 is an aqueous alkaline preparation of 40% p-chloro-m-cresol.
Preventol CMK 40 offers broad and balanced spectrum of activity covering gram-positive and gram-negative bacteria, mold fungi and yeast.
Preventol CMK 40 is effective against putrefactive bacteria.
Its stability pH range is 1-14.
The shelf life of this product is 2 years.

Applications of Preventol CMK 40
Adhesives & Sealants
Architectural coatings
Concrete Admixtures
Construction material
Finishing of metals
Paints & Coatings In-Can Preservation
Preservatives for metal-working fluids (193003)

Uses of Preventol CMK 40
For the preservation of concrete additives, metalworking fluids, textile auxiliaries, thickener solutions, adhesives (including protein-based formulations) and glues, knifing fillers, aqueous coatings etc.
For the formulation of disinfectants.

Molecular Weight: 142.58
Density (20 °C): 1,20 – 1,25 g/cm3
Crystallisation point: –5 °C
Initial boiling point: 97 °C
Flash point: not below 100 °C

Ignition temperature : not below 600 °C
Ionicity: anionic
Stability range: pH 1 – 14
Solubility: miscible with water

Application of Preventol CMK 40
Preventol CMK 40 is an aqeuous alkaline preparation of p-chloro-mcresol (Preventol CMK).
This active ingredient has a broad and balanced spectrum of activity covering gram-positive and gram negative bacteria, mould fungi and yeast.
Preventol CMK 40 is particularly effective against putrefactive bacteria and is therefore suitable for use in products which are difficult to preserve (e.g. protein-based formulations).

The weight of Preventol CMK 40 to be used is based on the total weight of the adhesive formulation.
Preventol CMK 40 can be metered directly into the products to be preserved following the concentrations as indicated below.
Stir to achieve fast and homogeneous distribution throughout the entire product.
In the production of dry glues, add Preventol CMK 40 toward the end of thickening in order to minimize any losses of active substance.

Add Preventol CMK 40 immediately after the preparation of the polymer dispersion or emulsion during the cooling process.
Losses of active ingredient caused by elevated temperatures should be taken into account and avoided by suitable measures.
Stir to ensure fast and homogenous distribution of the preservative throughout the product.

The weight of Preventol CMK 40 to be used is based on total weight of the product to be protected.
Meter Preventol CMK 40 can be metered directly into the products to be preserved following the concentrations as indicated below.
Stir to ensure fast and homogenous distribution of the preservative throughout the products.

Preventol CMK 40 can be incorporated into the original concentrate of metalworking fluids.
However, the compatibility with the fluid to be preserved must be evaluated before this method is attempted.
Preventol CMK 40 is equally suitable for tank-side addition.
To achieve fast distribution within a ready-to-use dilution of a metalworking fluid, dose the preservative at a point in the system where good circulation is provided.
Pre-dissolution in water may improve distribution.

The weight of Preventol CMK 40 to be used is based on the total weight of the product to be preserved.
Stir to ensure fast and homogenous distribution of the preservative throughout the product.
In the production of dry products, add Preventol CMK 40 toward the end of thickening to minimize any loss of active substance

Preventol CMK 40 is acceptable as an ingredient for use in lubricants with incidental food contact (HX-1) for use in and around food processing areas.
Such compounds may be used on food processing equipment as a protective anti-rust film, as a release agent on gaskets or seals of tank closures, and as a lubricant for machine parts and equipment in locations in which there is a potential exposure of the lubricated part to food.
The amount used should be the minimum required to accomplish the desired technical effect on the equipment.
If used as an anti-rust film, the compound must be removed from the equipment surface by washing or wiping, as required to leave the surface effectively free of any substance which could be transferred to food being processed.

FIRST AID of Preventol CMK 40

IF IN EYES:
Hold eye open and rinse slowly and gently with water for 15-20 minutes.
Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
Call a poison control center or doctor for treatment advice.

IF ON SKIN OR CLOTHING:
Take off contaminated clothing.
Rinse skin immediately with plenty of water for 15-20 minutes.
Call a poison control center or doctor for treatment advice.

IF SWALLOWED:
Call a poison control center or doctor immediately for treatment advice.
Have person sip a glass of water if able to swallow.
Do not induce vomiting unless told by the poison control center or doctor.
Do not give anything by mouth to an unconscious person.

PESTICIDE DISPOSAL:
Pesticide wastes are acutely hazardous.
Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal Law.
If these wastes cannot be disposed of by use according to the label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the
nearest EPA Regional Office for guidance.

CONTAINER HANDLING:
Nonrefillable container.
Do not reuse or refill this container.
Triple rinse (or equivalent).
Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration or, if allowed by State and Local authorities, by burning.
If burned, stay out of smoke.

Handle and open container in a manner as to prevent spillage.
If the container is leaking, invert to prevent leakage.
If the container is leaking or material is spilled for any reason or cause, carefully dam up spilled material to prevent runoff.
Refer to Precautionary Statements on label for hazards associated with the handling of this material.
Do not walk through spilled material.
Absorb spilled material with absorbing type compounds and dispose of as directed above.

Hazard classification & labelling of PREVENTOL CMK 40
Danger! According to the harmonised classification and labelling (ATP13) approved by the European Union, this substance causes severe skin burns and eye damage, is very toxic to aquatic life, is harmful if swallowed, causes serious eye damage, is harmful to aquatic life with long lasting effects, may cause an allergic skin reaction and may cause respiratory irritation.
Additionally, the classification provided by companies to ECHA in REACH registrations identifies that this substance is harmful in contact with skin.

About PREVENTOL CMK 40
PREVENTOL CMK 40 is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 10 to < 100 tonnes per annum.
PREVENTOL CMK 40 is used by consumers, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Biocidal Uses of PREVENTOL CMK
PREVENTOL CMK 40 is approved for use as a biocide in the EEA and/or Switzerland, for: human hygiene, disinfection, veterinary hygiene, product preservation, preservation of fibres, leather, rubber, or polymers, preservation for working / cutting fluids.

Consumer Uses of PREVENTOL CMK 40
PREVENTOL CMK is used in the following products: cosmetics and personal care products.
Other release to the environment of PREVENTOL CMK is likely to occur from: indoor use.

Article service life of PREVENTOL CMK 40
ECHA has no public registered data on the routes by which PREVENTOL CMK 40 is most likely to be released to the environment.
ECHA has no public registered data indicating whether or into which articles the substance might have been processed.

Widespread uses by professional workers of PREVENTOL CMK 40
PREVENTOL CMK 40 is used in the following products: pH regulators and water treatment products, laboratory chemicals and polishes and waxes.
PREVENTOL CMK 40 is used in the following areas: health services, scientific research and development and formulation of mixtures and/or re-packaging.
PREVENTOL CMK 40 is used for the manufacture of: chemicals.
Other release to the environment of PREVENTOL CMK 40 is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners).

Formulation or re-packing of PREVENTOL CMK 40
PREVENTOL CMK 40 is used in the following products: metals, coating products, fillers, putties, plasters, modelling clay and fuels.
Release to the environment of PREVENTOL CMK 40 can occur from industrial use: formulation of mixtures.

Uses at industrial sites of PREVENTOL CMK 40
PREVENTOL CMK 40 is used in the following products: pH regulators and water treatment products, textile treatment products and dyes, laboratory chemicals, non-metal-surface treatment products, inks and toners, leather treatment products and polymers.
PREVENTOL CMK 40 has an industrial use resulting in manufacture of another substance (use of intermediates).

PREVENTOL CMK 40 is used in the following areas: formulation of mixtures and/or re-packaging, health services, scientific research and development and printing and recorded media reproduction.
PREVENTOL CMK 40 is used for the manufacture of: chemicals, textile, leather or fur, plastic products and mineral products (e.g. plasters, cement).
Release to the environment of PREVENTOL CMK 40 can occur from industrial use: as processing aid, as an intermediate step in further manufacturing of another substance (use of intermediates), in processing aids at industrial sites and as processing aid.

Manufacture of PREVENTOL CMK 40
Release to the environment of PREVENTOL CMK 40 can occur from industrial use: manufacturing of the substance.