PREVENTOL MPT 11 F

PREVENTOL MPT 11 F = IPBC/TBZ = IPBC / THIABENDAZOLE

Product Type: Biocides
Mixture of 3-Iodo-2-propynyl N-butylcarbamate and Thiabendazole

Preventol MPT 11 F is off-white to light brown pellets containing a.i. TBZ and IPBC.
Fungicide Preventol MPT 11 F is Biocidal masterbatches for plastics and natural product plastic composites, such as wood-plastic composites (WPC).
Preventol MPT 11 F is a biocide additive against fungi and microorganisms - including Penicillium funiculosum and Aspergillus niger - which promises to increase the life of products made of wood plastic composite (WPC, Wood Plastic Composites).

Preventol MPT 11 F is an alternative to inorganic additives, such as zinc borate, added in high concentrations in the initial stages of extrusion. 
Preventol MPT 11 F, organic biocides can instead be introduced in low concentrations, during the addition of normal additives, and have a high dispersion capacity.
Preventol MPT 11 F is  Biocidal masterbatch for plastics and natural product plastic composites such as wood-plastic composites (WPC). 

Preventol MPT 11 F has wide range of activities, especially against mold staining of wood and plastics.
Preventol MPT 11 F offers protection against fungi which can cause discoloration and damageto the organic material which constitutes about 60-80% of the composite material: these are wood flour or fibres, also from processing waste, which are bound through the addition of about 20% of thermoplastic resins (PE, PP or PVC). 

The material obtained is more resistant than wood, while maintaining its “natural” aesthetic appearance, and can be extruded with the systems normally used for plastic materials.
Preventol MPT 11 F additive, which is specially tailored to WPC applications, relies on a combination of active ingredients that prevent attacks by both discoloring and destructive fungi on the organic material. 
Preventol MPT 11 F very effectively blocks the growth of a number of microorganisms such as Penicillium funiculosum or Aspergillus niger. 

Preventol MPT 11 F is based on a careful combination of materials that provides the organic material with effective protection from fungi that can cause discoloration and damage.
Preventol MPT 11 F is very effective in blocking the growth of a range of microorganisms including Penicillium funiculosum and Aspergillus niger. 

Preventol MPT 11 F is effective in low dosages and is simply added to the extruder alongside the other additives (usually bonding agents, UV protection agents and pigments). 
Preventol MPT 11 F, a biocide product that increases mint considerably the life span of the wood composites and plastic (WPC). 
Preventol MPT 11 F, specially created for these compounds are based on a careful combination of materials that protects the material ganic against fungi that can discolor and damage the material.

Biocides are widely used in a wide variety of products, including coatings, gypsum/plaster materials, polymer emulsions, adhesives, sealants, printing inks, plastics, wood impregnations, and more.
Biocides are chemical or microbiological substances, that are intended to neutralize harmful organisms in the nonagricultural sector. 
Among others, these harmful organisms may include fungi, bacteria, yeasts and algae. 

Microbial activity can cause discoloration, break down of emulsions, gelling or thinning, shifts in pH, bad odor and even gassing.
On surfaces visible growth of fungi, bacteria and algae can occur. 
Biocides provide protection for health and protection of products. 
Therefore, biocides play a significant role in the maintenance of health and hygiene standards.

USES and APPLICATIONS of PREVENTOL MPT 11 F:
-Preventol MPT 11 F is used Wood industry, Wood preservatives, material protection, and wood preservatives.
-The additive Preventol MPT 11 F, which is specially tailored to WPC applications, relies on a well thought-out combination of active ingredients that reliably prevents attacks by both discoloring and destructive fungi on the organic material. 
A challenge for WPC, which is linked to the use of the natural raw material wood, reads in the susceptibility of this material to microbes. 
Because WPC panels are often brushed for the sake of an appealing look and feel; moreover, the protective plastic matrix is ​​subject to gradual wear in practice. 
Both can expose wood fibers so that moisture can penetrate the material. 
Especially when using WPCs outdoors, which accounts for the lion's share of WPC applications in North America, untreated composites, like untreated wood, can become a breeding ground for fungi over time. 
In the best case, this only results in a discoloration of the material, but it is not uncommon for mold to develop and thus the slip resistance to be impaired. 
An efficient way of countering this problem is to use anti-mould additives during the manufacture of a WPC. 
Inorganic preparations such as zinc borate should be viewed critically here, since they have to be dosed in extremely high quantities and thus make recycling or thermal utilization more difficult. 
In contrast, organic biocides generally have low effective concentrations. 
However, the use of corresponding products in wood plastic composites places high demands on the formulation due to the high extruder temperatures of up to 200°C and the required rapid and homogeneous distribution in the compound with low dosage at the same time.
-Preventol MPT 11 F lives up to this claim: It very effectively blocks the growth of a number of microorganisms such as Penicillium funiculosum or Aspergillus niger. 
Preservatives and pigments - added to the extruder; there the additive is optimally distributed in the composite in the shortest possible time.
This efficiently increases the life expectancy of premium WPC products; Impairments caused by mold or discolouring microorganisms are drastically reduced, and complaint costs are minimized.
-Preventol MPT 11 F is a biocidal product for Natural fibre composites, e. g. WPC, BPC
-Preventol MPT 11 Fantifungal and slightly antibacterial
-Preventol MPT 11 F is used biocides safely. 
-Wood and plastic compounds contain between 60 and 80 per cent of wood in the form of chips, fibers or even finer particles that are combined with thermoplastics such as polypropylene, polyethylene or PVC in considerably smaller proportions (approximately 20 percent) to create a material that can extrude. 
The granules of WPC can be processed by extrusion or even injection moulds.
To get a look and feel attractive, WPC panels are often trimmed, and this practice, materials suffer a gradual process of attrition. 
In this way, the wood fibers end up exposing themselves, allowing moisture to permeabilize material. 
Especially when the WPC are used in outdoor environments, untreated compounds can become a fertile ground for fungi, as is the case with natural wood with the passage of time.
The effects of the WPC not treated with biocidal products range from a simple fade to the emergence of mold, a problem that affects not slippery quality of the material.
Preventol, a necessary treatment:
Because the wood is susceptible to attack by micro-organisms, it is necessary to protect the WPC from the first phase of the production. 
The Preventol MPT 11 F effectively blocks the growth of certain types of microorganisms such as Aspergillus Niger and Penicillium expansum. 
This new biocidal product is effective in low-dose and just have to add it during the extrusion process. 
Then distributed fast and effective way by all the compound increasing the period of life of the WPC products.
Advantages and uses of wood and plastic compounds:
The WPC offer considerable flexibility of design compared with natural wood. 
-Compounds of wood and plastic, used especially in North America and increasingly in Europe and Japan, are used in the production of roofs, armored facades, railings, frames of Windows and decorative elements, apart from in the automotive and furniture sector.
-Preventol MPT 11 F has Wide range of activities, especially against mold staining of wood and plastics.
-A new organic biocide, Preventol MPT 11 F, is said to significantly increase the lifespan of wood plastic composites (WPCs), by ‘dramatically’ reducing the adverse effects of mold or microorganisms that cause discoloration. 
-Preventol MPT 11 F is specially tailored for WPC applications and reportedly is based on a careful combination of materials that provide this organic material with effective protection from fungi that can cause discoloration and damage. 
-Preventol MPT 11 F significantly increases the service life of wood plastic composites (WPC). 
WPCs are composite materials made of wood and thermoplastics, which are achieving high growth rates worldwide due to their versatile and economical application possibilities.
-Preventol MPT 11 F very effectively blocks the growth of a number of microorganisms such as Penicillium funiculosum or Aspergillus niger. 
-Preventol MPT 11 F is effective in low doses and is simply combined with the other additives - usually adhesion promoters, UV protection agents and pigments - placed in the extruder; there the additive is optimally distributed in the composite in the shortest possible time. 
-Preventol MPT 11 F is said to meet this challenge by effectively blocking the growth of range of microorganisms including Penicillium funiculosum and Aspergillus niger. 
Said to be effective at low dosages—0.1% to 0.4% compared to 5% for zinc borate--Preventol MPT 11 can be simply added to the extruder with other additives such as bonding agents, UV stabilizers and pigments. 
The additive is then reportedly distributed throughout the composite rapidly and very effectively. 
-Preventol MPT 11 is specially tailored for WPC applications and reportedly is based on a careful combination of materials that provide this organic material with effective protection from fungi that can cause discoloration and damage. 
-Preventol MPT 11 F, which is specially tailored to WPC applications, relies on a well thought-out combination of active ingredients that reliably prevents attacks by both discoloring and destructive fungi on the organic material. 
-Preventol MPT 11 F blocks the growth of microorganisms. 
-Preventol MPT 11 F works in low doses and is simply added to the extruder with the other additives such as adhesion promoters, UV protection agents and pigments. 
There, the additive is optimally distributed in the composite in the shortest possible time.
-Preventol MPT 11 F is based on a careful combination of materials that provides the organic material with effective protection from fungi that can cause discoloration and damage.
-Preventol MPT 11 F is very effective in blocking the growth of a range of microorganisms including Penicillium funiculosum and Aspergillus niger. 
-Preventol MPT 11 F is then distributed throughout the composite rapidly and very effectively. 
This is an efficient means of increasing the lifespan of premium WPC products – the adverse effects of mold or microorganisms that cause discoloration are reduced dramatically and costs generated by complaints are minimized.
-Preventol MPT 11 F onto the market, a biocide product that considerably increases the life of wood and plastic composites (WPC). 
-Preventol MPT 11 F, a necessary treatment Due to the fact that wood is susceptible to attack by microorganisms, it is necessary to protect WPCs from the first phase of production. 
Preventol MPT 11 F effectively blocks the growth of certain types of microorganisms such as Penicillium funiculosum and Aspergillus nger. 
This new biocide product is effective at low doses and simply needs to be added during extrusion. 
Preventol MPT 11 F is then distributed from quickly and effectively throughout the compound, increasing the life of WPC products.

SYNONYMS:
IPBC
TBZ