PRODUCTS

PROGLYDE DMM GLYCOL ETHER

EC / List no.: 404-640-5
CAS no.: 111109-77-4
Mol. formula: C16H36O6

PROGLYDE DMM Glycol Ether isunique among propylene oxide-basedsolvents in that it is aprotic (no hydroxylfunctionality).
As a result, it is relativelyinert and can be used in protonsensitivesystems such as water-basedpolyurethane coatings.
PROGLYDE DMM Glycol Ether can also be used as an azeotroping solvent for esterification reactions.
Andwith its excellent stability, solvency, andcoupling performance, PROGLYDE DMM Glycol Ether provides excellentcompatibility with a wide range of agricultural formulations and cleaningproducts.
A aprotic (no hydroxyl functionality), that can be used in protonsensitive systems such as water-based polyurethane coatings.
Can also be used as an azeotroping solvent for esterification reactions.
And with its excellent stability, solvency, and coupling performance.
PROGLYDE DMM Glycol Ether provides excellent compatibility with a wide range of agricultural formulations and cleaning products.

Uses:
Cleaners
Textiles
Cosmetics
Resins
Coating formulation and application
Industrial, automotive and architectural coatings

Benefits
Favorable enviornmental profile, superior performance for end use applications, formulations may require less Performance solvent than P or E Series

Typical Properties
Boiling Point (°C @760mmHg): 175
CAS#: 111109-77-4
Chemical Name: PROGLYDE DMM Glycol Ether
Chemistry: PO
Density (25°C) at lb/gal (g/cc): 7.5 (0.899)
Evaporation Rate (n-butyl acetate=1.0): 0.13
Flash Point, Closed Cup: 65 °C
Freezing Point °F(°C): <-96 (<-71)
Hansen Solubility Parameter, dD (joules/cm3)1/2: 14.9
Hansen Solubility Parameter, dH (joules/cm3)1/2: 3.8
Hansen Solubility Parameter, dP (joules/cm3)1/2: 2.1
Low Vapor Pressure (<0.1 mmHg @20°C): Non-Exempt
Molecular Weight: 162.2 g/mol
Series: P-Series
Solubility in Water (25°C): 35 wt%
Solubility Water in (25°C): 4.5 wt%
Specific Gravity (25°C): 0.902
Surface Tension (1% actives, 25 °C): 26.3 dynes/cm
Vapor Pressure (mmHg @ 20°C): 0.55
Viscosity (25°C): 1 cP

DESCRIPTION
Application
Aprotic solvent for use on proton-sensitive systems such as water-based polyurethane coatings.

Chemical Properties
Clear colorless liquid

Uses:
PROGLYDE DMM Glycol Ether is used in method for evaluating profile of ink compound and manufacturing organic light emitting device comprising same.

Aprotic solvent for use on proton-sensitive systems such as water-based polyurethane coatings.
PROGLYDE DMM Glycol Ether can be used as aprotic solvent for use on proton-sensitive systems such as water-based polyurethane coatings.

Suggested Applications
- Aprotic solvent for use in water-basedpolyurethane/isocyanate coating systems.
- Active solvency for solvent-basedcoatings.
- Water removal agent useful inesterification reactions for the productionof exceptionally clear resins.
- Powerful paint-stripping formulationwhen used in combination with smallamounts of protic solvent.
- Aproticity, strong solvency, andcoupling performance provide forcompatibility with a wide range ofagricultural formulations.
- Effective for printed circuit boardcleaners developed to reduce CFCemissions.
- Stability over a wide pH range allowsfor use in strongly acidic or alkalinecleaners.

Features
- Aproticity
- High solvency
- Coupling ability
- Coalescing ability
- Water removal
- Powerful diluent
- Thermal and chemical stability
- Low odor
- Moderate evaporation rate
- Low toxicity

Technical Information
Physical State :Liquid
Storage :Store at room temperature
Melting Point :-15.22° C (Predicted)
Boiling Point :~195.0° C at 760 mmHg (Predicted)
Density :~0.9 g/mL (Predicted)

PROGLYDE DMM Glycol Ether is a useful research chemical.
Buy high-quality PROGLYDE DMM Glycol Ether from Biosynth-Carbosynth for a variety of research applications.
We also offer PROGLYDE DMM Glycol Ether in bulk quantities in addition to our standard pack sizes.

DMM is an aprotic and inert solvent used in water-based polyurethane coatings with molecular formula C8H18O3 and a molecular weight of 162.23 g/mol.
PROGLYDE DMM Glycol Ether is also known as 1-methoxy-3-(3-methoxypropoxy)propan.

PROGLYDE DMM Glycol Ether is a colourless liquid with mild odour, miscible with most common organic solvents but with limited solubility in water.

Features & Benefits:
High solvency
Low odour
Low toxicity
Moderate evaporation rate
Heat resistance
Chemical resistance

Uses:
PROGLYDE DMM Glycol Ether is mainly used for coating resins, cleaners, textiles, cosmetics, automotive construction application.

PROGLYDE DMM Glycol Ether is a versatile and environmentally friendly solvent that is commonly used in waterborne and curable coatings.
In addition, it can also be used for the synthesis of polyurethane, etc

PROGLYDE DMM Glycol Ether is a versatile environmentally friendly solvent with a high distillation range (199-200°C) and somehow a unique propylene oxide-based solvent, since it has no hydroxyl functionality.
Hence it is relatively inert and can be used in proton sensitive systems such as water-based polyurethane coatings.
PROGLYDE DMM Glycol Ether can also be used as an azeotroping solvent for esterification reactions.
With its excellent stability, solvency, and coupling performance, PROGLYDE DMM Glycol Ether provides excellent compatibility with a wide range of applications in waterbased formulations.
Main applications are coatings, printing inks and cleaners

Used in protonsensitive systems such as water-based polyurethane coatings.
May also be used as an azeotroping solvent for esterification reactions.
With its excellent stability, solvency, and coupling performance, this material provides excellent compatibility with a wide range of agricultural formulations and cleaning products.

PROGLYDE DMM Glycol Ether is multipurpose environmentally friendly cleaner solvent, have good stability,
very excellent solubility, and its impact on human health, higher security.
Typically used for water and curing coatings.
Also can be instead of NMP used for cleaning agent in the electronics industry.
And it is a important material raw matsynthesis of polyurethane.

PROGLYDE DMM Glycol Ether is a kind of non-ionic, multi-functional and environment-friendly solvent with low toxicity, film-forming property, hydrophilcity, weak ether scent, appropriate volatile speed, good chemical stability, excellent solubility, and high safety to human.
PROGLYDE DMM Glycol Ether is classified as Non- HAP/NAP green solvent in the USA and EU.
PROGLYDE DMM Glycol Ether is usually applied in water-based and curable coatings, chemicals like medicine and pesticide, widely used in cleanser, co-solvent, reaction solvent of organic synthesis, additive and moistening agent, used in electronic industry as cleaning agent by replacing N-methylpyrrolidone.
In addition, it can be used to synthesize polyurethane.

PROGLYDE DMM Glycol Ether , also called Proglyme, is a clear, colorless liquid.
PROGLYDE DMM Glycol Ether is primarily known as an industrial solvent for cleaning and coating formulations.
PROGLYDE DMM Glycol Ether is used for esterification reactions to produce exceptionally clear resins, to remove solvent-based coatings.
The powerful thinner with its excellent stability, solvency and coupling performance, the fabric offers excellent compatibility with a variety of agricultural formulations and cleaning products.
PROGLYDE DMM Glycol Ether is relatively inert and can be used in proton-sensitive systems such as water-based polyurethane coatings. The molar mass is 162.23 g / mol, the density is 0.904 g / cm3.
The boiling point is 175 ° C, the solubility is 526 g / l, the flash point is 65 ° C.
The substance is not classified as dangerous according to Regulation (EC) No. 1272/2008.
The general protective and precautionary measures for chemicals apply.
No special measures need to be taken during use.

About PROGLYDE DMM Glycol Ether
Helpful information
PROGLYDE DMM Glycol Ether is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 1 000 tonnes per annum.

PROGLYDE DMM Glycol Ether is used by consumers, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses
PROGLYDE DMM Glycol Ether is used in the following products: coating products, washing & cleaning products, air care products, anti-freeze products, biocides (e.g. disinfectants, pest control products), lubricants and greases, welding & soldering products and fillers, putties, plasters, modelling clay.
Other release to the environment of PROGLYDE DMM Glycol Ether is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use as processing aid.
Article service life
ECHA has no public registered data on the routes by which PROGLYDE DMM Glycol Ether is most likely to be released to the environment. ECHA has no public registered data indicating whether or into which articles the substance might have been processed.

Widespread uses by professional workers
PROGLYDE DMM Glycol Ether is used in the following products: coating products, fillers, putties, plasters, modelling clay, inks and toners, polymers, metal surface treatment products, leather treatment products and washing & cleaning products. ECHA has no public registered data on the types of manufacture using PROGLYDE DMM Glycol Ether. Other release to the environment of PROGLYDE DMM Glycol Ether is likely to occur from: indoor use as processing aid and outdoor use as processing aid.

Formulation or re-packing
PROGLYDE DMM Glycol Ether is used in the following products: coating products, fillers, putties, plasters, modelling clay, finger paints, metal surface treatment products, inks and toners, leather treatment products, lubricants and greases, perfumes and fragrances, photo-chemicals, polishes and waxes, polymers and washing & cleaning products.
Release to the environment of PROGLYDE DMM Glycol Ether can occur from industrial use: formulation of mixtures.
Uses at industrial sites
ECHA has no public registered data indicating whether or in which chemical products the substance might be used. ECHA has no public registered data on the types of manufacture using PROGLYDE DMM Glycol Ether. Release to the environment of PROGLYDE DMM Glycol Ether can occur from industrial use: in processing aids at industrial sites and of substances in closed systems with minimal release.
Manufacture
Release to the environment of PROGLYDE DMM Glycol Ether can occur from industrial use: manufacturing of the substance.

IUPAC NAMES:
2-methoxy-1-(2-methoxypropoxy)propane; 2-methoxy-1-[(1-methoxypropan-2-yl)oxy]propane
Dipropylene diglycol dimethyl ether
PROGLYDE DMM Glycol Ether
PROGLYDE DMM Glycol Ether
PROGLYDE DMM Glycol Ether
PROGLYDE DMM Glycol Ether
Dipropyleneglycol dimethylether
DPG-DME; PROGLYDE DMM Glycol Ether
DPG-DME; PROGLYDE* DMM
Oxybis(methoxypropan)
PROGLYDE DMM GLYCOL DIETHER
Propane, oxybis[methoxy-
Reaction mass of 2-methoxy-1-(2-methoxypropoxy)propane and 2-methoxy-1-[(1-methoxypropan-2-yl)oxy]propane

SYNONYMS:
1-methoxy-3-(3-methoxypropoxy)propane
methoxy-propyl-ether
2,6,10-Trioxaundecane
DSSTox_CID_22327
DSSTox_RID_79997
DSSTox_GSID_42327
66226-74-2
SCHEMBL117963
CHEMBL3182517
DTXSID90274213
Di(propylene glycol) dimethyl ether
ZINC5017926
Tox21_301158
NCGC00248310-01
NCGC00255056-01
LS-13545
CAS-111109-77-4
FT-0642718
J-520338
Di(propylene glycol) diMethyl ether, Mixture of isoMers >=99.1%
Proglyde? DMM
Di(propylene glycol) dimethyl ether, 99.5%, mixture of isomers
dipropyleneglycoldimethylether,mixtureofisomers
oxybis(methoxy-propan
PROGLYDE(TM) DMM
PROGLYDE DMM Glycol Ether
BIS(METHOXYPROPYL) ETHER
DI(PROPYLENE GLYCOL) DIMETHYL ETHER, 99.1+%, MIXTURE OF ISOMERS
Propane, oxybismethoxy-
Dipropylenglykoldimethylether
Dimethoxy dipropyleneglycol
DPDME
DPGDME
1-Methoxy-2-((1-Methoxypropan-2-yl)oxy)propane
PROGLYDE DMM Glycol Ether (DPDM)
Bis(methoxypropyl) ether, Proglyde(R) DMM
PROGLYDE DMM Glycol Ether ,Bis(methoxypropyl) ether
Di(propylene glycol) dimethyl ether, mixture of isomers,Bis(methoxypropyl) ether, Proglyde DMM
Dipropylene glycol d
Proglyde(R) DMM
Di(propylene glycol) dimethyl ether, 99.5%, for synthesis, mixture of isomers
DipropyleneGlycolDimethylEther(mixtureofisomers)>
Di(propylene glycol) dimethyl ether, for synthesis, mixture of isomers