PRODUCTS

SABOSTAB UV 65

DESCRIPTION:

SABOSTAB UV 65 by Sabo is a low molecular, hindered amine light stabilizer (HALS) for plastics.
SABOSTAB UV 65 shows excellent light stabilization performance.
SABOSTAB UV 65 is used in polyurethanes, flexible PVC, styrenic polymers (ABS, ASA), acrylics, unsaturated polyesters, elastomers and sealants.

SABOSTAB UV 65 is also ideal for use in plastisols and liquid masterbatches for plastics.
Typical addition levels for SABOSTAB® UV 65 in plastics range from 0.05-0.5%, depending upon the application.
SABOSTAB UV 65 is listed in EINECS, ENCS, TSCA, AICS, IECSC, DSL, NZIoC, ECL and PICCS.
The shelf life of SABOSTAB UV 65 is 5 years.

Sabostab UV 65 is a liquid hindered amine stabilizer for use in PP, PE, styrenics, unsaturated polyester, acrylics, vinyl polymers (PVC, PVB), including plastisols, elastomers, adhesives, sealants and coatings.

SABOSTAB UV 65 is particularly recommended for polyurethanes because of its excellent solubility in polyols.
Sabostab UV 65 typically demonstrates reduced interaction with co-additives such as pigments and/or other stabilizers.

SABOSTAB UV 65 is a low molecular hindered amine light stabilizer (HALS) which is effective in a broad range of coatings.
Applications include refinish coatings, industrial coatings, coil coatings, wood coatings, trade sale paints, and radiation curable acrylics.
SABOSTAB UV 65 is suitable for use in both water- and solvent-based coating systems.

SABOSTAB UV 65 is a Bis(1,2,2,6,6-pentamethyl-4-piperidinyl) sebacate + Methyl(1,2,2,6,6-pentamethyl-4-piperidinyl)sebacate.

SABOSTAB UV 65 acts as hindered amine light stabilizer.
SABOSTAB UV 65 has low molecular weight, slightly yellowish liquid.
SABOSTAB UV 65 is used in adhesives and sealants.

SABOSTAB UV 65 is a low-molecular-weight hindered amine light stabilizer (HALS) that is effective in a broad range of plastics and coatings.
Plastics applications include polyurethanes, flexible PVC, styrenic polymers (ABS, ASA), acrylics, unsaturated polyesters, elastomers, adhesives, and sealants.

SABOSTAB UV 65 also is ideal for use in plastisols and liquid masterbatches for plastics.
Coatings applications include refinish coatings, industrial coatings, coil coatings, wood coatings, trade sale paints, and radiation curable acrylics.
SABOSTAB UV 65 is suitable for use in both water- and solvent-based coating systems.

Typical addition levels for SABO®STAB UV 65 in plastics range from 0.05% - 0.5%, depending upon the application.
SABOSTAB UV 65 often shows a performance synergy with SONGSORB® UV Absorbers.

In coatings applications, typical addition levels range from 0.5% - 2.0% alone or in combination with 1.0% - 3.0% UV absorber.
All concentrations are based on percent by weight of coating resin solids.

The exact level to be used in any particular application should be determined in an appropriate testing program.

PROPERTIES OF SABOSTAB UV 65:

Type
Low MW HALS
Chemical composition
Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate / Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate
CAS No.
41556-26-7/82919-37-7
Physical form
LQ (liquid)

SAFETY INFORMATION ABOUT SABOSTAB UV 65

First aid measures:
Description of first aid measures:
General advice:
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Move out of dangerous area:

If inhaled:
If breathed in, move person into fresh air.
If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact:
Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
Consult a physician.

In case of eye contact:
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Continue rinsing eyes during transport to hospital.

If swallowed:
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Rinse mouth with water.
Consult a physician.

Firefighting measures:
Extinguishing media:
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas

Advice for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental release measures:
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment.

Avoid breathing vapours, mist or gas.
Evacuate personnel to safe areas.

Environmental precautions:
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.

Methods and materials for containment and cleaning up:
Soak up with inert absorbent material and dispose of as hazardous waste.
Keep in suitable, closed containers for disposal.

Handling and storage:
Precautions for safe handling:
Avoid inhalation of vapour or mist.

Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Storage class (TRGS 510): 8A: Combustible, corrosive hazardous materials

Exposure controls/personal protection:
Control parameters:
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Exposure controls:
Appropriate engineering controls:
Handle in accordance with good industrial hygiene and safety practice.
Wash hands before breaks and at the end of workday.

Personal protective equipment:
Eye/face protection:
Tightly fitting safety goggles.
Faceshield (8-inch minimum).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection:
Handle with gloves.
Gloves must be inspected prior to use.
Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.

Full contact:
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
It should not be construed as offering an approval for any specific use scenario.

Body Protection:
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection:
Where risk assessment shows air-purifying respirators are appropriate use a fullface respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls.

If the respirator is the sole means of protection, use a full-face supplied air respirator.
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.

Stability and reactivity:
Chemical stability:
Stable under recommended storage conditions.
Incompatible materials:
Strong oxidizing agents:
Hazardous decomposition products:
Hazardous decomposition products formed under fire conditions.
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas.

Disposal considerations:
Waste treatment methods:
Product:
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging:
Dispose of as unused product.