PRODUCTS

SECONDARY BUTYL ALCOHOL

2-Butanol

CAS Number: 78-92-2
MDL number: MFCD00004569
EC Index Number: 201-158-5
Mol. Formula:C4H10O
HSN Code: 29051490
Mol. Weight: 74.12

Secondary butyl alcohol is used in solvents and in esters to a limited extent; larger amounts are oxidized to methyl ethyl ketone, an important solvent for the manufacture of plastics, fabrics, and explosives.
Similar to n-butyl alcohol, Secondary butyl alcohol is used in solvents and in plasticizers.
Secondary butyl alcohol's esters are also used in fruit flavourings.
Secondary butyl alcohol is also used as a solvent and as a denaturing agent for ethyl alcohol.
In smaller quantities Secondary butyl alcohol is used in flavourings and in perfumes.

Secondary butyl alcohol is an organic compound with formula CH3CH(OH)CH2CH3.
Secondary butyl alcohol's structural isomers are 1-butanol. isobutanol, and tert-butanol.
Secondary butyl alcohol is chiral and thus can be obtained as either of two stereoisomers designated as (R)-(−)-2-butanol and (S)-(+)-2-butanol.
Secondary butyl alcohol is normally encountered as a 1:1 mixture of the two stereoisomers — a racemic mixture.

2-Butanol is a flammable, colorless liquid that is soluble in three parts water and completely miscible with organic solvents.
2-Butanol is produced on a large scale, primarily as a precursor to the industrial solvent methyl ethyl ketone.
2-Butanol is a natural product found in Aloe africana, Cichorium endivia, and other organisms with data available.
2-Butanol appears as a clear colorless liquid with an alcohol odor.
Flash point below 0° F.
Less dense than water.
Vapors heavier than air.
Soluble in water.
Moderately irritates the eyes and skin.
Prolonged and repeated contact may cause defatting and drying of the skin.
Vapors may irritate the nose, throat and respiratory tract.
May be harmful by ingestion.

Secondary butyl alcohol is a secondary alcohol that is butane substituted by a hydroxy group at position 2.
Secondary butyl alcohol derives from a hydride of a butane

Applications of Secondary butyl alcohol
Secondary butyl alcohol is manufactured industrially by the hydration of 1-butene or 2-butene:
Sulfuric acid is used as a catalyst for this conversion.[6]
In the laboratory Secondary butyl alcohol can be prepared via Grignard reaction by reacting ethylmagnesium bromide with acetaldehyde in dried diethyl ether or tetrahydrofuran.
Although some 2-butanol is used as a solvent, it is mainly converted to butanone (methyl ethyl ketone, MEK), an important industrial solvent and found in many domestic cleaning agents and paint removers.
Though most paint removers have ceased using MEK in their products due to health concerns and new laws.
Volatile esters of 2-butanol have pleasant aromas and are used in small amounts as perfumes or in artificial flavors.
Although some 2-butanol is used as a solvent, most of the annual production is converted to butanone ("MEK"), which is an important industrial solvent found in many domestic cleaning agents and paint removers.
Volatile esters of 2-butanol have pleasant aromas and are used in small amounts as perfumes or in artificial flavors.

Manufacture of Pharma intermediates
As solvent in Paints and Lacquer industry
As solubilizer for the production of cleaning compounds
Manufacture of Secondary Butyl Acetate, Nitrocellulose solvents
Manufacture of Printing Inks and as a solvent in flexographic printing Dyes

General Description of Secondary butyl alcohol
A clear colorless liquid with an alcohol odor. Flash point below 0°F.
Less dense than water.
Vapors heavier than air.
Soluble in water.
Moderately irritates the eyes and skin.
Prolonged and repeated contact may cause defatting and drying of the skin.
Vapors may irritate the nose, throat and respiratory tract.
May be harmful by ingestion.

Description of Secondary butyl alcohol
Secondary butyl alcohol is also known as 2-Butyl alcohol and sec-Butanol.
Secondary butyl alcohol is used as a solvent and can be converted to butanone which is an industrial solvent.
Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.

Identifiers of Secondary butyl alcohol
CAS Number: 78-92-2
14898-79-4 (R)
4221-99-2 (S)
Beilstein Reference: 773649
1718764 (R)
1718763 (S)
CHEBI:35687
ChEMBL45462
ChemSpider: 6320
76392 (R)
392543 (S)
DrugBank: DB02606
ECHA InfoCard: 100.001.053
EC Number: 201-158-5
Gmelin Reference: 1686
396584 (R)
25655 (S)

Physical Description of Secondary butyl alcohol
Sec-butyl alcohol appears as a clear colorless liquid with an alcohol odor.
Flash point below 0° F.
Less dense than water.
Vapors heavier than air.
Soluble in water.
Moderately irritates the eyes and skin.
Prolonged and repeated contact may cause defatting and drying of the skin.
Vapors may irritate the nose, throat and respiratory tract.
May be harmful by ingestion.
Liquid
Colorless liquid with a strong, pleasant odor.

PubChem CID: 6568
84682 (R)
444683 (S)
RTECS number: EO1750000
UNII: 0TUL3ENK62
DLH38K423J (R)
69KXU5NDTO (S)
UN number: 1120

Properties of Secondary butyl alcohol
Chemical formula: C4H10O
Molar mass: 74.123 g·mol−1
Density: 0.808 g cm−3
Melting point: −115 °C; −175 °F; 158 K
Boiling point: 98 to 100 °C; 208 to 212 °F; 371 to 373 K
Solubility in water: 290 g/L
log P: 0.683
Vapor pressure: 1.67 kPa (at 20 °C)
Acidity (pKa): 17.6
Magnetic susceptibility (χ): −5.7683×10−5 cm3 mol−1
Refractive index (nD): 1.3978 (at 20 °C)

Thermochemistry of Secondary butyl alcohol
Heat capacity (C): 197.1 J K−1 mol−1
Std molarentropy (So298): 213.1 J K−1 mol−1
Std enthalpy of formation (ΔfH⦵298): −343.3 to −342.1 kJ mol−1
Std enthalpy ofcombustion (ΔcH⦵298): −2.6611 to −2.6601 MJ mol−1

Computed Properties of Secondary butyl alcohol
Molecular Weight: 74.12
XLogP3: 0.6
Hydrogen Bond Donor Count: 1
Hydrogen Bond Acceptor Count: 1
Rotatable Bond Count: 1
Exact Mass: 74.073164938
Monoisotopic Mass: 74.073164938
Topological Polar Surface Area: 20.2 Å²
Heavy Atom Count: 5
Formal Charge: 0
Complexity: 19.6
Isotope Atom Count: 0
Defined Atom Stereocenter Count: 0
Undefined Atom Stereocenter Count: 1
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Covalently-Bonded Unit Count: 1
Compound Is Canonicalized: Yes

Precautions of Secondary butyl alcohol
Like other butanols, 2-butanol has low acute toxicity.
The LD50 is 4400 mg/kg (rat, oral).
Several explosions have been reported during the conventional distillation of 2-butanol, apparently due to the buildup of peroxides with the boiling point higher than that of pure alcohol (and therefore concentrating in the still pot during distillation).
As alcohols, unlike ethers, are not widely known to be capable of forming peroxide impurities, the danger is likely to be overlooked.

Category: Alcohols (<C12)
Description: Colorless liquid with a strong, pleasant odor.
Sources/Uses: Used as a solvent, paint remover, and cleaner; also used to manufacture other organic compounds.
Comments: A skin, eye, and respiratory tract irritant.
Inhalation of high concentrations can cause CNS depression.

Physical Properties of Secondary butyl alcohol
Physical description: Colorless liquid with a strong, pleasant odor.
Boiling point: 211°F
Molecular weight: 74.1
Freezing point/melting point: -175°F
Vapor pressure   12 mmHg
Flash point: 75°F
Vapor density
Specific gravity: 0.81
Ionization potential: 10.10 eV
Lower explosive limit (LEL): 1.7% at 212°F
Upper explosive limit (UEL): 9.8% at 212°F
NFPA health rating: 2
NFPA fire rating: 3
NFPA reactivity rating: 0

Properties of Secondary butyl alcohol
Formula: C4H10O
Formula mass: 74.12
Melting point, °C: -115
Boiling point, °C: 94
Vapor pressure, mmHg: 18
Vapor density (air=1): 2.6
Saturation Concentration: 1.70% at 20 C
Evaporization number: 1.5 (butyl acetate = 1)
Critical temperature: 263
Critical pressure: 41.5
Density 0.8534 g/cm3
Solubility in water: 125 g/L
Viscosity: 3.04 cp (25 C)
Surface tension: 23.0 g/s2
Refractive index: 1.3978 (20 C)
Dipole moment: 1.624 D
Dielectric constant: 3.25 (25 C)
Partition coefficient, pKow: 0.61
Heat of vaporization: -49.72 kj/mol
Heat of combustion: -2642 kJ/mol

Hazards and Protection of Secondary butyl alcohol
Storage Keep away from heat, sparks, and flame.
Keep away from sources of ignition.
Store in a tightly closed container.
Store in a cool, dry, well-ventilated area away from incompatible substances.
Flammables-area.
Do not store in aluminum containers.

Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area.
Ground and bond containers when transferring material.
Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Protection:
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles.
Skin: Wear appropriate protective gloves and appropriate protective clothing to prevent skin exposure.
Respirators: A full facepiece respirator with organic vapor cartridge may be worn up to 50 times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest.
For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator.
Small spills/leaks: Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container.
Clean up spills immediately, using the appropriate protective equipment.
Remove all sources of ignition. Use a spark-proof tool.
Provide ventilation.
A vapor suppressing foam may be used to reduce vapors.
Stability: Stable under normal temperatures and pressures.
May form explosive peroxides on prolonged storage.
Incompatibilities: Acids, acid chlorides, acid anhydrides, strong oxidizing agents, halogens, chlorine, nitrogen tetroxide, phosphorus trichloride, hypochlorous acid, aluminum, organic peroxides, perchloric acid, permonosulfuric acid.
Decomposition: Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

CAS: 78-92-2
Molecular Formula: C4H10O
Molecular Weight (g/mol): 74.12
MDL Number: MFCD00004569
InChI Key: BTANRVKWQNVYAZ-UHFFFAOYNA-NShow More
PubChem CID: 6568
ChEBI
CHEBI:35687
IUPAC Name: butan-2-ol
SMILES: CCC(C)O

Specifications of Secondary butyl alcohol
Linear Formula: CH3CHOHCH2CH3
Formula Weight: 74.12
Density: 0.808g/mL
Color: Colorless
Quantity: 100mL

IDENTITY of Secondary butyl alcohol
CAS Number: 78-83-1
MDL Number: MFCD00004740
MF: C4H10O
MW: 74.12
EINECS:   201-148-0
BRN: 1730878
SPECIFICATIONS & PROPERTIES
Min. Purity Spec: >99% (GC)
Physical Form (at 20°C): Liquid
Melting Point: -108°C
Boiling Point: 107-108°C
Flash Point: 28°C
Density: 0.802
Long-Term Storage: Store long-term in a cool, dry place

Chemical Formula: C4H10O
Average Molecular Mass: 74.122 g/mol
Monoisotopic Mass: 74.073 g/mol
CAS Registry Number: 78-92-2
IUPAC Name: butan-2-ol
Traditional Name: 2-butanol
InChI Identifier: InChI=1S/C4H10O/c1-3-4(2)5/h4-5H,3H2,1-2H3
InChI Key: BTANRVKWQNVYAZ-UHFFFAOYSA-N

Chemical Taxonomy of Secondary butyl alcohol
Description: belongs to the class of organic compounds known as secondary alcohols.
Secondary alcohols are compounds containing a secondary alcohol functional group, with the general structure HOC(R)(R') (R,R'=alkyl, aryl).
Kingdom: Organic compounds
Super Class: Organic oxygen compounds
Class: Organooxygen compounds
Sub Class: Alcohols and polyols
Direct Parent: Secondary alcohols
Alternative Parents: Hydrocarbon derivatives
Substituents: Secondary alcohol
Hydrocarbon derivative: Aliphatic acyclic compound
Molecular Framework: Aliphatic acyclic compounds

First Aid Measures
Always seek professional medical attention after first aid measures are provided.
Eyes: Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally.
Skin: Immediately flush skin with excess water for 15 minutes while removing contaminated clothing.
Ingestion: Call Poison Control immediately.
Aspiration hazard.
Rinse mouth with cold water.
Give victim 1-2 tbsp of
activated charcoal mixed with 8 oz water.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration.
Section 5: Fire Fighting Measures
Class IC Flammable Liquid.
When heated to decomposition, emits acrid fumes 3
Protective equipment and precautions for firefighters: Use foam or dry chemical to extinguish fire. 0 0
Firefighters should wear full fire fighting turn-out gear and respiratory protection (SCBA). Cool container
with water spray. Material is not sensitive to mechanical impact. Material is sensitive to static discharge.
Section 6: Accidental Release Measures
Use personal protection recommended in Section 8.
Isolate the hazard area and deny entry to unnecessary and unprotected
personnel. Remove all ignition sources and ventilate area.
Contain spill with sand or absorbent material and place material in a sealed bag or container for disposal. Wash spill area after pickup is complete.
Section 7: Handling and Storage Red
Handling: Use with adequate ventilation and do not breathe dust or vapor.
Avoid contact with skin, eyes, or clothing. Wash
hands thoroughly after handling.

Physical Properties of Secondary butyl alcohol
Physical state at 20 °C: Liquid
Colour: Clear Colorless
Odour: sweet, fruity odor
Odour threshold: 3.2 ppm
pH value: 7
Melting point [°C]: -115 °C
Auto-ignition temperature [°C]: 405 °C
Flammability (solid, gas): Flammable
Flash point [°C]: 24 °C
Boiling point [°C]: 99.5°C
Vapour pressure mm/Hg: 12 mm Hg @ 20C
Vapour density: 2.6
Density [g/cm3]: 0.808
Solubility in water [% weight]: 12.5 g/100 ml @ 20°C
Viscosity at 40°C [mm2/s]: 3.5 cps @ 20 deg C
Explosion limits - upper [%]: 9.80%
Explosion limits -lower [%]: 1.70%

Product Code: 027507
Assay: (GC) 98.0%
Molecular Formula: CH3.CH2.CHOH.CH3
CAS: 78-92-2
Molecular Weight: 74.12
HS CODE: 29051490

Specifications OF Secondary butyl alcohol
Appearance (Clarity): Clear
Appearance (Colour): Colourless
Appearance (Form): Liquid
Assay (GC): min. 99%
Density (g/ml) @ 20°C: 0.805-0.807
Refractive Index (20°C): 1.397-1.398
Boiling Range: 98-100°C
Non Volatile Matter: max. 0.005%
Acidity (CH3COOH): max. 0.005%
Aldehyde & Ketones: max. 0.2%
Water (KF): max. 0.2%

Description of Secondary butyl alcohol
Catalogue Number: 109630
Synonyms: sec-Butyl alcohol
Description: 2-Butanol

Product Information of Secondary butyl alcohol
CAS number: 78-92-2
EC index number: 603-127-00-5
EC number: 201-158-5
Hill Formula: C₄H₁₀O
Chemical formula: CH₃CH(OH)CH₂CH₃
Molar Mass: 74.12 g/mol
HS Code: 2905 14 90
Structure formula:
Quality Level: MQ300

Physicochemical Information of Secondary butyl alcohol
Boiling point: 99 - 102 °C (1013 hPa)
Density: 0.808 g/cm3
Explosion limit: 1.4 - 9.8 %(V)
Flash point: 27 °C
Ignition temperature: 390 °C
Melting Point: -115 °C
Vapor pressure: 15.3 hPa (20 °C)
Solubility: 125 g/l

Formula: C4H10O
Net Charge: 0
Average Mass: 74.12160
Monoisotopic Mass: 74.07316
Physical state at 20 °C: Liquid
Colour: Clear Colorless
Odour: sweet, fruity odor
pH value: 7
Melting Point/ Freezing point [°C]: -115 °C
Flash Point [°C]: 24 °C
Explosion limits - upper [%]: 9.80%
Explosion limits -lower [%]: 1.70%
Vapour density: 2.6
Boiling point [°C]: 99.5°C
Density [g/cm3]: 0.808
Auto-ignition temperature [°C]: 405 °C
Vapour pressure mm/Hg: 12 mm Hg @ 20C
Odour threshold: 3.2 ppm
Flammability (solid, gas): Flammable
Viscosity at 40°C [mm2/s]: 3.5 cps @ 20 deg C
Solubility in water [% weight]: 12.5 g/100 ml @ 20°C

Production of Secondary butyl alcohol
Secondary butyl alcohol is produced on a large scale, primarily as a precursor to the industrial solvent methyl ethyl ketone.
2-Butanol is chiral and thus can be obtained as either of two stereoisomers.
Secondary butyl alcohol is normally found as an equal mixture of the two stereoisomers — referred to as a racemic mixture.
Secondary butyl alcohol is manufactured industrially by the hydration of 1-butene or 2-butene using sulfuric acid as a catalyst for this conversion.

Background of Secondary butyl alcohol
There are four isomeric structures for butanol:
First, the unmodified term, butanol, usually refers to the straight chain isomer with the alcohol functional group at the terminal carbon, which is also known as n-butanol or 1-butanol.
Second is the straight chain isomer with the alcohol at an internal carbon is sec-butanol or 2-butanol.
Third is the branched isomer with the alcohol at a terminal carbon is isobutanol, or 2-methyl-1-propanol.
And finally, the branched isomer with the alcohol at the internal carbon is tert-butanol, or 2-methyl-2-propanol.
Butanol isomers, due to their different structures, have somewhat different melting and boiling points.
Secondary butyl alcohol and isobutanol have limited solubility, while the other two isomers are fully miscible with water.
This is because all alcohols have a hydroxyl group which makes them polar which in turn tends to promote solubility in water.
At the same time, the carbon chain of the alcohol resists solubility in water.
Methanol, ethanol, and propanol are fully miscible with water, while Secondary butyl alcohol is only moderately miscible because of the balance between the two opposing solubility trends.

Precautions OF Secondary butyl alcohol
Like many alcohols, 2-butanol is considered toxic.
Secondary butyl alcohol has shown a low order of toxicity in single dose experiments to laboratory animals and is considered safe enough for use in cosmetics.
Brief, repeated overexposure with the skin can result in depression of the central nervous system, as with other short-chain alcohols.
Exposure may also cause severe eye irritation and moderate skin irritation.
The main dangers are from prolonged exposure to fumes.
In extreme cases this includes suppression of the central nervous system and even death.
Under most circumstances, butanol is quickly metabolized to carbon dioxide.
Secondary butyl alcohol has not been shown to damage DNA or cause cancer.

Properties Values OF Secondary butyl alcohol
Appearance:Clear & free of suspended matter
Purity, Wt: % 99.5 Min
Specific Gravity (20/20°C): 0.807 – 0.809
Color, Pt-Co: 10 Max
Water, Wt. %: 0.2 Max
Acidity (Acetic Acid), Wt.: % 0.002 Max

Secondary Butyl Benzene (SBB) or sec butylbenzene (CAS 135-98-8) is a colourless flammable liquid with an aromatic odour.
Secondary butyl alcohol's chemical formula is C10H14 with a molecular weight of 134.22 g/mol.
Secondary butyl alcohol is alkyl benzene and its structure has a benzene ring substituted with a sec-butyl group.
Secondary butyl alcohol is nearly insoluble in water and miscible with alcohol, ether and benzene.
Secondary butyl alcohol is widely used in the flavours and fragrance industry.
Vinati Organics is a leading manufacturer of SBB with the highest quality and purity.

Physical and Chemical Properties:
IUPAC Name:   (Butan-2-yl)benzene
Molecular Formula:   C10H14
Form:   Liquid
Colour:   Colourless
Odour:   Aromatic
CAS Number:   135-98-8
Boiling Point:   173-174° C
Molar Weight:   134.22
Density:   0.8600 g/mL
Refractive Index:   1.4890 to 1.491
Flammability:   Flammable
Relative Vapour Density:   4.62
Solubility: Nearly insoluble in water, miscible with alcohol, ether and benzene

How Is it Manufactured?
Secondary butyl benzene is produced by making benzene react with either n-butyl alcohol or sec-butyl alcohol in the presence of anhydrous aluminium chloride and hydrochloric acid.

Industry Applications of Secondary butyl alcohol
SBB is an intermediary compound used to make perfumery chemicals.
Secondary butyl alcohol is used to produce secondary butyl quinoline which has massive applications in the flavours and fragrance industry.
Secondary butyl benzene is also used as a solvent for coating compositions, surface-active agents, plasticizers and organic synthesis.
Quality and purity of sec butylbenzene are crucial to getting the most authentic results. It needs to be stored in drums.

PRODUCT IDENTIFICATION
CAS NO. 78-92-2 : 2-BUTANOL
EINECS NO.: 201-158-5
FORMULA CH3CH2CH(OH)CH3

CLASSIFICATION of Secondary butyl alcohol
PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: clear
MELTING POINT: -115 C
BOILING POINT: 99 C
SPECIFIC GRAVITY: 0.806
SOLUBILITY IN WATER
soluble
VAPOR DENSITY: 5.79
AUTOIGNITION: 405 C

STABILITY: Stable under ordinary conditions

GENERAL DESCRIPTION & APPLICATIONS

2-Butanol, a four carbon secondary alcohol, is a volatile, clear liquid with a strong alcoholic odor; boils at 99 C, water solubility of 12.5%. This substance is most hazardous when peroxide levels are concentrated by distillation or evaporation. It is a highly refractive compound which corrode some plastics, and rubbers. It is miscible with many organic solvents, and incompatible with strong oxidizers. It is flammable strongly with a luminous flame. It is used as a direct solvent and as an intermediate in the manufacture of other organic chemicals (2-butanone). Uses include:
Solvent for paints, coatings, varnishes, resins, gums, camphor, vegetable oils, dyes, fats, waxes, resins, shellac, rubbers, and alkaloids, alkyd resins, lacquers, enamels, paint removers, and adhesives
Manufacture of industrial cleanners, perfumes, dyes, wetting agents
Formulating flotation agents and hydraulic brake fluids
Extraction of fish meal to produce fish protein concentrate and for the production of fruit essences.
Flavouring agent

APPEARANCE: clear
PURITY: 99.0% min
ACIDITY : 0.002 max ( KOH mg/kg)
WATER: 100ppm max
COLOR (APHA): 15 max

Description: Sec-Butyl Alcohol(SBA)

Physical and Chemical Property: Clear colorless liquid and has a strong smell.
Secondary butyl alcohol can dissolve in water and ethanol ethyl ether immiscibility.
Molecular Formula: C4H10O
CAS No.: 78-92-2
Class: 7

Applications: used as emulsifier, dye agent, dehydrating agent, paint remover, industrial detergents and so on, also used as plasticizers, herbicides, oil extractant.
Secondary butyl alcohol as a result of the coating can increase the processing performance and scalability, Secondary butyl alcohol can be used as a nitro spray paint, distempers Mastics diluent solvent.

Product Introduction of Secondary butyl alcohol
Sec-Butyl Alcohol (SBA)
CAS NO.: 78-92-2
Molecular Formula: C4H10O
Secondary butyl alcohol also known as 2-Butanol; sec-Butanol; sec-Butyl alcohol; is a clear colorless liquid with an alcohol odor.
SBA is utilized in perfumes and artificial flavors and also involved in the production of fruit essences.
Secondary butyl alcohol plays an essential role in the esterification of Acetic acid.
Secondary butyl alcohol is also used as a precursor for methyl ethyl ketone(MEK).

Product application of Secondary butyl alcohol
Secondary butyl alcohol is used as emulsifier, dye agent, dehydrating agent, paint remover, industrial detergents and so on, also used as plasticizers, herbicides, oil extractant.
Secondary butyl alcohol as a result of the coating can increase the processing performance and scalability, it can be used as a nitro spray paint, distempers Mastics diluent solvent.

Flammable liquid and vapour
May be harmful if swallowed
Causes eye irritation
May cause respiratory irritation
May cause drowsiness or dizziness
May be harmful if swallowed and enters airways
Transportation
UN Classification
UN Hazard Class: 3; UN Pack Group: III

STORAGE of Secondary butyl alcohol
Fireproof.
Separated from strong oxidants and aluminium.

Synonyms of Secondary butyl alcohol
2-Butanol
Butan-2-ol
sec-Butanol
SEC-BUTYL ALCOHOL
78-92-2
2-Butyl alcohol
2-Hydroxybutane
Butylene hydrate
s-Butyl alcohol
1-Methyl-1-propanol
1-Methylpropyl alcohol
s-Butanol
Methyl ethyl carbinol
Ethyl methyl carbinol
Butanol secondaire
Butanol-2
1-Methyl propanol
Methylethylcarbinol
Ethylmethyl carbinol
Alcool butylique secondaire
CCS 301
15892-23-6
Butanol secondaire [French]
MFCD00004569
NSC 25499
n-Butan-2-ol
sec-C4H9OH
Alcool butylique secondaire [French]
S.B.A.
CHEBI:35687
2-Butanol, anhydrous
Butanol secondaire (French)
Methylethyl carbinol
Butyl alcohol, sec-
2-Butanol (natural)
Caswell No. 11C
UNII-0TUL3ENK62
(+/-)-2-Butanol
Alcool butylique secondaire (French)
2-Butanol, (R)-
HSDB 674
(1)-Butan-2-ol
EINECS 201-158-5
EINECS 240-029-8
EPA Pesticide Chemical Code 001502
BRN 0773649
sec-Butyl Alcohol, (R)-(-)-
ethyl ethanol
s-Butylalkohol
AI3-24189
0TUL3ENK62
sec.-butanol
secondary butanol
D-sec-Butanol
L-sec-Butanol
DL-sec-Butanol
rac-2-butanol
butane-2-ol
methylpropan-2-ol
sec-BuOH
rac-butan-2-ol
2-deuteriooxybutane
sec. butyl alcohol
sec.-butyl alcohol
DL-2-Butanol
s-BuOH
Butane, 2-hydroxy-
S(+)-2-butanol
secondary butyl alcohol
2-Butanol, CP grade
Secondary Buryl Alcohol
2-Butanol, (S)-
2-Butanol, 99%
(+/-)butan-2-ol
3-BUTANOL
.+/-.-2-Butanol
DSSTox_CID_1762
2-Butanol, >=99%
EC 201-158-5
DSSTox_RID_76312
DSSTox_GSID_2176
2-01-00-00400 (Beilstein Handbook Reference)
CHEMBL45462
2-Butanol, analytical standard
WLN: QY2&1
ASTM D3606 2-Butanol IS
DTXSID9021762
2-Butanol, (.+/-.)-
BDBM36157
2-Butanol, anhydrous, 99.5%
2-Butanol, p.a., 99.0%
AMY1100
NSC25499
Tox21_201092
BBL011463
NSC-25499
STL146575
AKOS000249480
AKOS016352938
2-Butanol, ReagentPlus(R), >=99%
MCULE-5005120003
CAS-78-92-2
Butyl Alcohol (sec)- Reagent Grade ACS
NCGC00090743-01
NCGC00090743-02
NCGC00258644-01
2-Butanol 100 microg/mL in Acetonitrile
2-Butanol, SAJ first grade, >=98.0%
2-Butanol, JIS special grade, >=99.0%
DB-016763
B0705
FT-0605046
FT-0605252
FT-0605313
Q209332
2DD92146-ED3E-446F-8B14-A7DB1F14EF8C
2-Butanol, puriss. p.a., Reag. Ph. Eur., >=99.5% (GC)
2-Butanol, United States Pharmacopeia (USP) Reference Standard
2-Butanol, Pharmaceutical Secondary Standard; Certified Reference Material