SODIUM LAURYL ETHER SULPHATE %28

Molecular Weight; 496,699 g / mol

Chemical Formula: CH3 (CH2) 10CH2 (OCH2CH2) nOSO3Na

Physical Appearance: White or light yellow Paste, Fluid gel

Storage: Room temperature, keep container tightly sealed.

Sodium lauryl ether sulfate is used as oil emulsifier, wetting agent, cosmetics, medicine and toothpaste, and detergent. Sodium lauryl ether sulphate 28 is also used as a research tool in biochemistry. Sodium lauryl ether sulphate 28 is used as an oil emulsifier, wetting agent and detergent. SLES sodium lauryl ether sulphate is used in foam-producing dishwashing detergents. SLES sodium lauryl ether sulphate is used in body washes and toothpastes and pharmaceuticals as a research tool in the biochemistry industry. Since SLES sodium lauryl ether sulfate 70 has a good lather, it is suitable for cosmetics such as laundry detergent, hard surface cleaners that produce shower gels.

LES sodium lauryl ether sulfate can be used in the production of skin such as facial cleansers, liquid soaps, skin cleansers, liquid detergents, as well as to produce cleansers, soap and hand cleanser and baby shampoo. SLES can be used in the production of cosmetics for women (suitable for salon and consumer products.) SLES sodium lauryl ether sulfate has good cleaning, emulsifying, foaming performance, well soluble, wide compatibility, strong resistance to hard water, high biodegradation and low irritation to skin and eyes. It is a lubricant, dyeing agent, cleaner, foaming and degreasing agent in textile, printing and dyeing, oil and leather industries.

It is generally defined as a surfactant. Sles (Sodium Laureth Sulphate) enables the material produced to foam due to its chemical properties. Sles and SLS (Sodium Lauryl Sulphate) show similar properties. But SLS is more irritating than Sles. Therefore SLES has been developed. Sodium lauryl ether sulphate is 28 anionic surfactants. Such surfactants reduce the surface tension of the water. For this reason, Sodium Lauryl Ether Sulphate increases the stability of the bubbles in it by decreasing the amount of work required to form the foam.

Sodium lauryl ether sulphate 28 are organic molecules with a water-loving end (hydrophobic) and a water-loving end (hydrophilic). Sles can be derived from coconut oil. Sodium lauryl ether sulphate 28 is a chemical that is used extensively in the manufacture of detergents and detergent derivatives. Sles stands for Sodium Lauryl Ether Sulphate. Sodium lauryl ether sulphate 28 is a water soluble chemical.Sodium lauryl ether sulphate is commercially available in 30% and 70% concentrations. The manufacturer can supply low and high concentration product according to the working area. Sles is a chemical with a different viscosity according to its density in solution. It has liquid and semi-fluid consistency. In winter, its viscosity increases due to the ambient temperature. So its fluidity is decreasing. Light yellow and liquid consistency.Sodium lauryl ether sulphate boils with 28 water at the same temperature. But the melting point varies according to the density in the solution. The flammability temperature of Sodium lauryl ether sulphate 28 is 94 ° C. Sodium lauryl ether sulphate 28 is stable under normal conditions. Sodium lauryl ether sulphate 28 is a basic chemical when evaluated as acidic or basic.

Sodium lauryl ether sulphate 28 has very good solubility in water in terms of solubility. It is dissolved in Ethyl Alcohol and Methyl Alcohol. Sodium lauryl ether sulphate 28 is a more viscous liquid than water. Sodium lauryl ether sulphate 28 is a chemical that causes corrosion if it comes into contact with the human body. For this reason, Sles can cause severe irritation if it comes into contact with skin and eyes.

The effects of Sles (Sodium Laureth Sulphate) on the human body vary depending on its concentration in the solution. As the rate of anionic surfactant in the solution increases, its effect on the human body increases in parallel. If sodium lauryl ether sulphate 28 comes into contact with your body, first wash it with plenty of water, if the inconveniences caused by this are not eliminated, medical support should be obtained. Sodium lauryl ether sulphate 28 is a Chemical that should not be swallowed. It is a chemical that, if it enters the human body, can irritate internal organs and disrupt their functionality.

Sodium lauryl ether sulphate 28 should be stored away from the sun and in dry environments. It should be kept away from heat. It should be kept away from water except the usage phase. The chemical name of the Sls compound is referred to as sodium lauryl sulfate. In daily life, this chemical is used in liquid soaps, shaving foams and toothpaste to provide foaming, sls (sodium lauryl sulphate) to create foam and provide cleaning. Sodium lauryl ether sulphate differs from the 28 chemical.

Sls (sodium lauryl sulfate) has negative effects on the effects of skin proteins. For this reason, it damages the outer layer of the skin, resulting in drying of the skin. For this reason, people with sensitive skin should not use cleaning agents with sls. In addition, shampoos containing this anionic substance cause the hair to weaken. Sodium lauryl ether sulphate 28 does not have such effects. Sles is produced by ethoxylation of the sls compound. Sles does not remove excess moisture from your body, on the contrary, it softens your skin. Sodium lauryl ether sulphate 28 has very powerful effects for removing dirt, clay and some greasy stains. Its greatest properties are to be ionized before working with anionic surfactants. They separate into ions by dissolving in water iris. In this way, it becomes a negative charge.

Sodium lauryl ether sulphate 28 easily binds to negatively charged particles, positively charged clay, dirt and greasy particles. In Sodium kauryl ether sulphate 28, anionic surfactants have the ability to create more foam compared to other surfactants. Sodium lauryl ether sulphate 28 is used as a surfactant in detergent production that gives it its cleaning feature. Its hydrophilic and hydrophobic properties are beneficial properties in detergents. If used in the sles manufacturing process, water molecules that are polar are repelled by non-polar hydrocarbon molecules. This situation is defined by its hydrophobic property.
Sodium laryl ether sulphate 28 is used in detergent production, toothpaste production. Sodium lauryl ether sulphate 28, Sles (Sodium Laureth Sulphate) used in the industrial industry, in the production of industrial cleaning chemicals. Sodium lauryl ether sulphate 28, surfactant is used in the production of skin care creams in the cosmetics sector.Sodium lauryl ether sulphate is used in shampoos containing low pH products and personal care products (Bubble Bath, shaving cream, ointment and sometimes in toothpastes) to create foaming and viscosity. sles is used.
Sodium lauryl ether sulphate 28 is used in the textile printing and dye industry. Sodium lauryl ether sulphate 28 is treated as a lubricant and as a foaming agent in the area where mechanized tunneling machines are used. Sodium lauryl ether sulphate 28 is used in the oil and leather industry as a lubricating chemical in sles. Sodium lauryl ether sulphate is used in the manufacture of hand washing soaps. It is used in cleansing products, creams and lotions as an effective composition with sodium lauryl ether sulphate 28. The purposes of use in creams and lotions are to wet the skin surface, dissolve oil and prevent blemishes. It is used in cleaning products and bath foams due to its foaming properties. The use of SLS and SLES substances in cosmetics and personal care products was first found safe in 1983 and later in 2002 as a result of the researches. Substances known to be carcinogenic are determined and registered by various international organizations. SLS and SLES are not classified as carcinogens by organizations that monitor and register carcinogenic substances. Both substances do not have a feature that may pose a risk to human health, such as causing cancer.

SLES is a natural chemical derived from coconut. The real problem in SLES is that it is contaminated with the carcinogenic 1,4 dioxane in the production method (ethoxylation). SLES is the same as SLS. Slightly less dangerous than SLS Sodium lauryl ether sulphate 28, they act similar to soap. Sodium lauryl ether sulphate 28 is used in the production of liquid dishwashing and machine detergents, technical cleaning materials. Sodium lauryl ether sulpahte 28 is used to reduce surface tension in cosmetic cleaning products such as shampoo, soap, shower gel and bubble bath. Sodium lauryl ether sulphate 28 is used in toothpaste production, as it is easily diluted with salts and has a good foaming character. SLES is an inexpensive and highly effective foaming agent SLES, sodium lauryl sulfate (SLS), ammonium lauryl sulfate (ALS) and sodium paret sulphate are surfactants used in many cosmetic products for their cleaning and emulsifying properties. They act similar to soap. They have excellent detergent, emulsification and foamability, are easy to dissolve in water. It is resistant to suitable hard water and has high biodegradation. Sles (Sodium Laureth Sulfate) is an anionic surfactant. Such surfactants reduce the surface tension of the water. ... Sles (Sodium Laureth Sulfate) is a chemical that is used extensively in the manufacture of detergents and detergent derivatives. Sles stands for Sodium Lauryl Ether Sulphate. Due to its high foaming feature, many cosmetics and detergents are preferred because of surfactants and lowering surface tension.

Usage Areas: Thanks to its superior detergent and cleaning properties, it is used for liquid detergents as well as liquid dishwashing and technical cleaning agents. Due to its good foam characteristics and easy thickening with salt, Texapon N70 / SLES is also suitable as a basic surfactant for cosmetic cleaning preparations such as shampoos, shower gels and foam baths, toothpaste. SLES is an inexpensive and very effective foam generator SLES, sodium lauryl sulfate (SLS), ammonium lauryl sulfate (ALS) and sodium pareth sulphate are surfactants used for cleaning and emulsifying properties in many cosmetic products. They behave similarly to soap. It is derived from palm kernel oil or coconut oil. It is preferred for this process as it is easily diluted with salts and has a good foaming character. It is used to reduce surface tension in cosmetic cleaning products such as shampoo, soap, shower gel and bath foam. Since the product viscosity and active rate is low, it is generally used in shampoo production, but it is not preferred.
It is used as an additive in liquid dishwashing materials. It is also used as an alternative in products such as bath foam, washing powder, and hand washing soap, as it increases foaming activity. It is used for removing oils that may occur in printing and dyeing products. May cause irritation in the mouth and upper digestive system. May cause severe skin irritation, especially if exposure is prolonged and / or repeated.

May cause severe irritation in contact with eyes. Damage to eye tissue if not washed immediately. Inhalation of dust, vapors will cause harm. It should not be swallowed. Ingestion causes harm. It is necessary to protect eyes and skin. Eye contact causes damage to the eyes. Areas in contact with the skin should be washed with plenty of water. One of the most important components of shampoos are surfactants (surfactants). These reduce the surface tension between water and dirt, allowing dirt to be easily removed from the hair and skin. Surfactants are divided into 4 groups: Anionic, cationic, amphoteric and nonionic. The soap we know is an anionic detergent. When the hair is washed with soap, calcium salts, which are an alkaline residue, settle on the skin and hair follicles and cause dullness and breakage; It causes irritation on skin and mucous membranes (inside the mouth, inside of the eyelid, etc.).

New anionic surfactants (alkyl sulfates, alkyl ether sulfates) do not create such an effect. Anionic surfactants such as Ammonium Lauryl Sulphate (ALS), sodium laureth sulphate (SLS), sodium laurel sarcosinate, sodium myreth sulphate, sodium pareth sulphate, sodium lauryl ether sulfate (SLES) cause curling and abrasion due to friction. One of the most important components of shampoos are surfactants (surfactants). These reduce the surface tension between water and dirt, allowing dirt to be easily removed from the hair and skin.

Surfactants are divided into 4 groups: Anionic, cationic, amphoteric and nonionic. The soap we know is an anionic detergent. When the hair is washed with soap, calcium salts, which are an alkaline residue, settle on the skin and hair follicles and cause dullness and breakage; It causes irritation on skin and mucous membranes (inside the mouth, inside of the eyelid, etc.). By using SLES to replace the LAS, phosphate can be stored or reduced and the overall dose of the active ingredient reduced. It is a lubricant, dyeing agent, cleaner, foaming agent and degreasing agent in the textile, printing and dyeing, oil and leather industries. Store in a cool and well-ventilated area. Keep away from heat and flame. Store in a tightly closed container.