Quick Search
Polymeric carbodiimide
Stabaxol P 100 is an excellent extension of material service life, solid, high thermal stability.
Stabaxol P 100 is an anti-hydrolysis agent for PET, PBT, PA and TPE.
Stabaxol P 100 is available as masterbatch based on the corresponding polymers.
Stabaxol P 100 is highly recommended to provide adequate local ventilation, where its stabilized products are exposed to temperatures exceeding 200 °C.
Stabaxol P 100 is designed for polyester and polyamide processing which provides sufficient dispersion of the material in the polymer.
Stabaxol P 100 has a shelf life of 24 months.
Description of Stabaxol P 100:
Stabaxol P 100 Powder is an anti-hydrolysis agent for PET, PBT, PA und TPE.
Chemical Composition of Stabaxol P 100:
Polymeric carbodiimide
Appearance of Stabaxol P 100:
Yellowish powder (Stabaxol P 100 is also available as amber coloured pastilles, see TDS of Stabaxol P 100 Pastilles)
Solubility of Stabaxol P 100:
Stabaxol P 100 is soluble in toluene, carbon tetrachloride, trichloroethylene, methylenechloride; poor solubility in acetone; nearly insoluble in ethyl alcohol, water, and polyesters.
Typical Properties of Stabaxol P 100:
Property / Nominal Value / Unit
Carbodiimide content / min. 13.0 wt. / %
Density at 20 °C / 68 ° F / approx. 1.05 / g/cm³
Melting range / approx. 100 - 120 / 212 - 248 / °C / °F
PRODUCT DETAILS ABOUT STABAXOL P 100:
Stabaxol P 100 is an antihydrolysis agent for PET, PBT, PA und TPE.
Stabaxol P 100 is a yellowish power.
TYPICAL APPLICATIONS OF STABAXOL P 100:
The main application of Stabaxol P 100:
Hydrolysis protection of PET, PBT, PA and TPE.
The addition of merely 2.0 weight-% Stabaxol P 100 to PET increases the life time of the latter by 3 - 4 times.
Depending on the number of acid end groups and the humidity content of the polymer to be stabilized, as well as the stabilizing effect to be obtained, it is recommended to use 1.0 - 2.5 weight-% Stabaxol P 100.
The most suitable dosage depends on the requirements to be met and should always be ascertained in preliminary trials.
Stabaxol P 100 is preferably metered separately to the infeeding zone of the extruder.
Stabaxol P 100 can be processed on any unit suitable for polyester and polyamide processing which provides sufficient dispersion of the material in the polymer.
In respect of the extruder equipment, experience shows that it is advisable to use a twin-screw extruder equipped with a L/D ratio > 38.
Appropriate cooling of the feeding zone is recommended to avoid particle accumulation in the feeding area.
At processing temperature traces of volatile matters can escape, which may temporarily cause irritation of skin, eyes and respiratory passages.
It is highly recommended to provide adequate local ventilation at all places where Stabaxol P 100 stabilized products are exposed to temperatures exceeding 200 °C (392 °F).
In particular, Stabaxol P 100 is necessary to avoid direct contact with volatile emissions.
For easy dosing and homogenizing, Stabaxol P 100 is available as masterbatch based on the corresponding polymers.
Applications of Stabaxol P 100:
The main application of Stabaxol P 100 Powder is hydrolysis protection of PET, PBT, PA and TPE.
The addition of merely 2.0 weight-% Stabaxol P 100 Powder to PET increases the life time of the latter by 3 - 4 times.
Depending on the number of acid end groups and the humidity content of the polymer to be stabilized, as well as the stabilizing effect to be obtained, it is recommended to use 1.0 - 2.5 weight-% Stabaxol P 100 Powder.
The most suitable dosage depends on the requirements to be met and should always be ascertained in preliminary trials.
Stabaxol P 100 Powder is preferably metered separately to the infeeding zone of the extruder.
Stabaxol P 100 Powder can be processed on any unit suitable for polyester and polyamide processing which provides sufficient dispersion of the material in the polymer.
In respect of the extruder equipment, experience shows that it is advisable to use a twin-screw extruder equipped with a L/D ratio > 38.
Appropriate cooling of the feeding zone is recommended to avoid particle accumulation in the feeding area.
At processing temperature traces of volatile matters can escape, which may temporarily cause irritation of skin, eyes and respiratory passages.
It is highly recommended to provide adequate local ventilation at all places where Stabaxol P 100 Powder stabilized products are exposed to temperatures exceeding 200 °C (392 °F).
In particular, Stabaxol P 100 is necessary to avoid direct contact with volatile emissions.
For easy dosing and homogenizing, Stabaxol P 100 is also available as masterbatch based on the corresponding polymers.
Packaging of Stabaxol P 100:
• 20 kg (44 lb) fibre drums, 540 kg (1188 lb) per pallet
Storage conditions of Stabaxol P 100:
According to experience available, if stored at about 20 °C (68 °F) in originally closed containers, Stabaxol P 100 Powder can be kept for 24 months without becoming less effective.
Store Stabaxol P 100 in cool and dry place.
During transportation or in case of prolonged storage at slightly elevated temperatures, one might observe agglomeration of the particles.
Please make sure that such agglomerations are being broken prior to use.
Handling of Stabaxol P 100:
Consult the safety data sheet for relevant safety data & references as well as possibly necessary warning labels.
Description
Stabaxol P 110 Powder is an anti-hydrolysis agent for polyester polymers (PET, PBT, TPE), polylactide (PLA) and polyamides (PA).
Chemical Composition:
Polymeric carbodiimide
Appearance:
Yellowish powder
Solubility of Stabaxol P 100:
Stabaxol P 100 is very easily soluble in petrol (gasoline), toluene; poor solubility in acetone and alcohols, insoluble in water.
