PRODUCTS

STABAXOL P 100

Stabaxol P 100 enhances resistance to hydrolysis, significantly extending the material's service life.
Stabaxol P 100 improves durability and stability under humid conditions.
Stabaxol P 100 prevents degradation due to moisture, maintaining mechanical properties.

CAS Number: 29117-01-9
EC Number: Not publicly disclosed
Molecular Formula: (C₁₆H₂₂N₂)ₙ
Molecular Weight: The molecular weight of Stabaxol P 100 is approximately 3,000 g/mol.

SYNONYMS:
Polycarbodiimide, Stabaxol P, Stabaxol P 100, Stabaxol P 100, Poly[nitrilomethanetetraylnitrilo(2,4,6-triisopropyl-m-phenylene)], Poly(1,3,5-Triisopropylphenylene-2,4-carbodiimide), Stabaxol KE 9291, Stabaxol P 110, Stabaxol PCD, Triisopropylbenzenepolycarbodiimide, Triisopropylbenzenecarbodiimide polymer

Stabaxol P 100 is an anti-hydrolysis agent for PET, PBT, PA and TPE.
Stabaxol P 100 is available as masterbatch based on the corresponding polymers.
Stabaxol P 100 is highly recommended to provide adequate local ventilation, where its stabilized products are exposed to temperatures exceeding 200°C.

Stabaxol P 100 is designed for polyester and polyamide processing which provides sufficient dispersion of the material in the polymer.
Stabaxol P 100 has a shelf life of 24 months.
Stabaxol P 100 is an antihydrolysis agent for PET, PBT, PA und TPE.

Stabaxol P 100 is a yellowish powder.
Stabaxol P 100 can be processed on any unit suitable for polyester and polyamide processing, which provides sufficient dispersion of the material in the polymer.

In respect of the extruder equipment, experience shows that Stabaxol P 100 is advisable to use a twin-screw extruder equipped with a L/D ratio > 38.
Appropriate cooling of the feeding zone is recommended to avoid particle accumulation in the feeding area.

It is highly recommended to provide adequate local ventilation at all places where Stabaxol P 100 stabilized products are exposed to temperatures exceeding 200 °C (392 °F).
In particular, Stabaxol P 100 is necessary to avoid direct contact with volatile emissions.

For easy dosing and homogenizing, Stabaxol P 100 is available as masterbatch based on the corresponding polymers.
Stabaxol P 100 is an antihydrolysis agent for PET, PBT, PA und TPE.
The main application of Stabaxol P 100 is hydrolysis protection of PET, PBT, PA and TPE.

The addition of merely 2.0 weight-% Stabaxol P 100 to PET increases the life time of the latter by 3 - 4 times.
Depending on the number of acid end groups and the humidity content of the polymer to be stabilized, as well as the stabilizing effect to be obtained, it is recommended to use 1.0 - 2.5 weight-% Stabaxol P 100.

The most suitable dosage of Stabaxol P 100 depends on the requirements to be met and should always be ascertained in preliminary trials.
Stabaxol P 100 is preferably metered separately to the infeeding zone of the extruder.

Stabaxol P 100 has a molecular weight of over 15,000 g/mol.
Stabaxol P 100 has excellent long-term stability and good thermal stability.

USES and APPLICATIONS of STABAXOL P 100:
Application of Stabaxol P 100: Finished product usage for extrusion and injection molding machines is approximately 1.5–2.5 parts per 100 parts.
Stabaxol P 100 is primarily used as an anti-hydrolysis agent in various polymers.
Polyethylene Terephthalate (PET): Stabaxol P 100 enhances resistance to hydrolysis, significantly extending the material's service life.

Polybutylene Terephthalate (PBT): Stabaxol P 100 improves durability and stability under humid conditions.
Polyamide (PA): Stabaxol P 100 prevents degradation due to moisture, maintaining mechanical properties.
Thermoplastic Elastomers (TPE): Stabaxol P 100 increases longevity and performance in applications exposed to moisture.

Incorporating just 2.0% by weight of Stabaxol P 100 into PET can increase its lifespan by 3 to 4 times.
Stabaxol P 100 is used hydrolysis protection of PET, PBT, PA and TPE.
The addition of merely 2.0 weight-% Stabaxol P 100 to PET increases the life time of the latter by 3 - 4 times.

Depending on the number of acid end groups and the humidity content of the polymer to be stabilized, as well as the stabilizing effect to be obtained, it is recommended to use 1.0 - 2.5 weight-% Stabaxol P 100.

INDUSTRIES OF STABAXOL P 100:
*Automotive and Transportation,
*Electrical and Electronics,
*Consumer Goods,
*Building and Construction

PRODUCT GROUPS OF STABAXOL P 100:
*Other Additives,
*Antioxidants and Stabilizers,
*Plastic and Rubber Additives

✅ BENEFITS AND CHARACTERISTICS OF STABAXOL P 100:
*Hydrolysis Resistance:
Stabaxol P 100 is effectively prevents moisture-induced degradation in polymers.

*Thermal Stability:
Stabaxol P 100 maintains performance at elevated processing temperatures.

*Compatibility:
Stabaxol P 100 easily integrates into various polymer matrices without adversely affecting their properties.

*Formulation Flexibility:
Stabaxol P 100 is available in powder and masterbatch forms for diverse processing needs.

PHYSICAL and CHEMICAL PROPERTIES of STABAXOL P 100:
Appearance: Yellowish powder
Carbodiimide Content: Minimum 13.0% by weight
Density at 20°C: Approximately 1.05 g/cm³
Melting Range: Approximately 100–120°C
Solubility:
Soluble in toluene, carbon tetrachloride, trichloroethylene, methylene chloride
Poor solubility in acetone
Nearly insoluble in ethyl alcohol, water, and polyesters
Chemical Name: Polymeric carbodiimide
EC Number: Not publicly disclosed
Chemical Name: Poly[nitrilomethanetetraylnitrilo[2,4,6-tris(1-methylethyl)-1,3-phenylene]]

CAS Number: 29117-01-9
EC Number: Not publicly disclosed
Molecular Formula: (C₁₆H₂₂N₂)ₙ
Appearance: Pale yellowish powder or pellets
Carbodiimide Content: Minimum 13% by weight
Density at 20°C: Approximately 1.05 g/cm³
Melting Range: Approximately 75–85°C
Solubility:
Soluble in toluene, carbon tetrachloride, trichloroethylene, methylene chloride
Poor solubility in acetone
Nearly insoluble in ethyl alcohol, water, and polyesters

FIRST AID MEASURES of STABAXOL P 100:
-Description of first-aid measures
*General advice:
Show this material safety data sheet to the doctor in attendance.
*If inhaled:
After inhalation:
Fresh air.
*In case of skin contact:
Take off immediately all contaminated clothing.
Rinse skin with
water/ shower.
*In case of eye contact:
After eye contact:
Rinse out with plenty of water.
Call in ophthalmologist.
Remove contact lenses.
*If swallowed:
After swallowing:
Immediately make victim drink water (two glasses at most).
Consult a physician.
-Indication of any immediate medical attention and special treatment needed.
No data available

ACCIDENTAL RELEASE MEASURES of STABAXOL P 100:
-Environmental precautions:
Do not let product enter drains.
-Methods and materials for containment and cleaning up:
Cover drains.
Collect, bind, and pump off spills.
Observe possible material restrictions.
Take up dry.
Dispose of properly.
Clean up affected area.

FIRE FIGHTING MEASURES of STABAXOL P 100:
-Extinguishing media:
*Suitable extinguishing media:
Carbon dioxide (CO2)
Foam
Dry powder
*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.
-Further information:
Prevent fire extinguishing water from contaminating surface water or the ground water system.

EXPOSURE CONTROLS/PERSONAL PROTECTION of STABAXOL P 100:
-Control parameters:
--Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:
*Eye/face protection:
Use equipment for eye protection.
Safety glasses
*Body Protection:
protective clothing
*Respiratory protection:
Recommended Filter type: Filter A
-Control of environmental exposure:
Do not let product enter drains.

HANDLING and STORAGE of STABAXOL P 100:
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Tightly closed.
Dry.

STABILITY and REACTIVITY of STABAXOL P 100:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature).
-Possibility of hazardous reactions:
No data available