Quick Search
DESCRIPTION:
TEXTURECEL CRT 30000 is a high purity carboxymethylcellulose powder which is used in the production of lithium-ion battery electrodes as a polymer binder.
TEXTURECEL CRT 30000 is a high molecular weight, water-soluble sodium carboxymethylcellulose (CMC) polymer.
TEXTURECEL CRT 30000 is used in a variety of applications as a thickener, binder and film former.
TEXTURECEL CRT 30000 is most commonly used in the production of lithium-ion batteries as a binder for the anode.
TEXTURECEL CRT 30000 provides improved mechanical strength to the anode and reduces surface defects that impact charging and discharging to improve cycling.
The high purity and water-soluble nature of TEXTURECEL CRT 30000 make it much more efficient and environmentally friendly than other binders used in electrode production such as PVDF.
TEXTURECEL CRT 30000 is also used as a general purpose thickener for coatings, inks and adhesives.
As a thickener, TEXTURECEL CRT 30000 provides a significant viscosity increase at a relatively low addition rate (typically less than 2%) and pseudoplastic rheology.
The shear-thinning nature of coatings, inks and adhesives thickened with TEXCTURECEL CRT 30000 makes them easier to apply and improves the preparation's ability to cling to vertical and overhead surfaces.
TEXTURECEL CRT 30000 provides multiple functionalities in many dosage forms – from oral solids, like granules and pellets, to powders and coatings for tablets.
Due to its versatility, TEXTURECEL CRT 30000 can also be applied in topicals and semi-solid and liquid forms, including ointments, cream, gels, pastes, suspensions and emulsions; and wound care products, too.
TEXTURECEL CRT 30000 is an anionic water-soluble cellulosic polymer.
TEXTURECEL CRT 30000 is based on a granular form sodium carboxymethyl cellulose to provide a viscosity of 30,000 cP at only a 2% add level.
TEXTURECEL CRT 30000 is commonly used in gel packs for its non-toxicity, food-grade approval, and gel formation capability.
TEXTURECEL is a highly purified cellulose-derived ingredient suitable for a range of dietary supplement applications – from tablet formats, capsules and powers to granules for ready-to-mix sachets and drinkable solutions.
TEXTURECEL CRT 30000 is a high molecular weight, water-soluble sodium carboxymethylcellulose (CMC) polymer.
TEXTURECEL CRT 30000 is used in a variety of applications as a thickener, binder and film former. TEXTURECEL CRT 30000 is most commonly used in the production of lithium-ion batteries as a binder for the anode.
TEXTURECEL CRT 30000 provides improved mechanical strength to the anode and reduces surface defects that impact charging and discharging to improve cycling.
The high purity and water-soluble nature of TEXTURECEL CRT 30000 make it much more efficient and environmentally friendly than other binders used in electrode production such as PVDF.
TEXTURECEL CRT 30000 is also used as a general purpose thickener for coatings, inks and adhesives.
As a thickener, TEXTURECEL CRT 30000 provides a significant viscosity increase at a relatively low addition rate (typically less than 2%) and pseudoplastic rheology.
The shear-thinning nature of coatings, inks and adhesives thickened with TEXTURECEL CRT 30000 makes them easier to apply and improves the preparation's ability to cling to vertical and overhead surfaces.
APPLICATIONS OF TEXTURECEL CRT 30000:
TEXTURECEL CRT 30000 is an ideal polymer for gel form products such as ice packs and food packaging packs.
TEXTURECEL CRT 30000 also provides relatively high viscosity which is suitable for batteries, ceramics, cleaners, and coatings when a high level of thickening is required.
Gel Packs and Absorbents:
TEXTURECEL CRT 30000 is ideal for absorbent pads, gel and cool packs for its non-toxic profile and high gel formation especially when food contact approval is needed.
Ceramics: TEXTURECEL CRT 30000 is commonly used in glazes, tiles and clay bodies for thickening, plasticity, and green strength.
Cleaning Solutions: TEXTURECEL CRT 30000 is utilized in detergents and cleaners for higher viscosity yield and improved rheology.
Coatings and Inks: TEXTURECEL CRT 30000 is an economical alternative to synthetic thickeners for coatings and inks when natural thickener is preferred.
FEATURES OF TEXTURECEL CRT 30000:
Viscosity, Brookfield, LVT, SP.4, 30 rpm at 1% aqueous solution (dry basis), 25 °C: 3000 to 4000 mPa.S Degree of substitution: 0.82 to 0.95 pH value at 1% aqueous solution: 6.5 to 8.5 Total salt content, dry basis 0.50 Max
Primary Chemistry: Sodium Carboxymethylcellulose
FEATURES AND BENEFITS OF TEXTURECEL CRT 30000:
Water soluble
No odor or taste anionic polymer
Exceptional binding properties
Excellent thickener
Superior rheology control
Excellent viscosity modifier
Shear-thinning polymer
Improved lubricity
Wide range of PH stability (PH 3.5 - 12)
Advanced film formation properties
Approved food additives
An economical option for basic thickening
High surface tension, less foam formation
Compatible with most hydrocolloids
Forming fat, oil and organic solvent resistant films
Problems solved
Low purity of sodium carboxymethylcellulose thickeners
Poor lithium-ion battery cycling
Sagging and dripping of paint, ink and adhesive on vertical surfaces
APPLICATIONS
Lithium-ion battery electrodes; screen printing ink; architectural coatings; industrial coatings; latex paint; water-based adhesives
PRODUCT BENEFITS:
Outstanding versatility
Excellent film-former
Rheology modifier
Suspension stabilization
GMO-free*, vegan, vegetarian, plant-based
PRODUCT SPECIFICATIONS
Viscosity, Brookfield, LVT, SP.4, 30 RPM, 1% aqueous solution (dry basis), 25°C: 3,000 - 4,000 cP
Substitution, degree of 0.82 - 0.95
pH Value, 1% aqueous solution: 6.5 - 8.5
Total salt content, dry basis 0.50 Max
SAFETY INFORMATION ABOUT TEXTURECEL CRT 30000
First aid measures:
Description of first aid measures:
General advice:
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Move out of dangerous area:
If inhaled:
If breathed in, move person into fresh air.
If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact:
Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
Consult a physician.
In case of eye contact:
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Continue rinsing eyes during transport to hospital.
If swallowed:
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Rinse mouth with water.
Consult a physician.
Firefighting measures:
Extinguishing media:
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas
Advice for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental release measures:
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment.
Avoid breathing vapours, mist or gas.
Evacuate personnel to safe areas.
Environmental precautions:
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up:
Soak up with inert absorbent material and dispose of as hazardous waste.
Keep in suitable, closed containers for disposal.
Handling and storage:
Precautions for safe handling:
Avoid inhalation of vapour or mist.
Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Storage class (TRGS 510): 8A: Combustible, corrosive hazardous materials
Exposure controls/personal protection:
Control parameters:
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Exposure controls:
Appropriate engineering controls:
Handle in accordance with good industrial hygiene and safety practice.
Wash hands before breaks and at the end of workday.
Personal protective equipment:
Eye/face protection:
Tightly fitting safety goggles.
Faceshield (8-inch minimum).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection:
Handle with gloves.
Gloves must be inspected prior to use.
Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
Full contact:
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
It should not be construed as offering an approval for any specific use scenario.
Body Protection:
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection:
Where risk assessment shows air-purifying respirators are appropriate use a fullface respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls.
If the respirator is the sole means of protection, use a full-face supplied air respirator.
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.
Stability and reactivity:
Chemical stability:
Stable under recommended storage conditions.
Incompatible materials:
Strong oxidizing agents:
Hazardous decomposition products:
Hazardous decomposition products formed under fire conditions.
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas.
Disposal considerations:
Waste treatment methods:
Product:
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging:
Dispose of as unused product.
