Quick Search
DESCRIPTION:
Thermolat is a warming agent which allows a pleasant sensation of warmth with a significant reduction of the side effects occurring with VBE alone.
Thermolat is safe and gentle for skin.
Thermolat can be used for relaxing balms, hand/foot creams, firming products, lip care, facial masks, and scalp care.
SYNONYMS OF THERMOLAT:
Vanillyl Butyl Ether, 1,2-Hexanediol, Caprylyl Glycol, Ascorbyl Palmitate.
Symrise developed a smart warming ingredient, which is gentle to the skin
Thermolat is Suitable for body, face and hair care products
Thermolat is Honored with the BSB & PCHi Innovation Awards
Thermolat creates a feeling like gentle warm sunshine on the skin.
Symrise has developed the sensory ingredient for use in creams, gels and balms and it is readily available to cosmetic formulators.
The innovative active complex stands out by providing pleasant, relaxing and long- lasting effects without feelings of stinging or burning.
71% of consumers would like to feel an intense warming sensation from their skin care applications.
However, it is important that it neither causes redness nor stinging sensations.
Based on thorough research, Symrise has developed a suitable approach.
Its novel sensory ingredient Thermolat® addresses the skin’s thermal perception and provides a gentle warming sensation.
In comparison to the warming effect achieved by existing vanillyl butyl ether (VBE) technologies, Thermolat® provides a controlled warming sensation and helps to significantly reduce side effects such as redness, burning, stinging that might occur with VBE alone.
With this innovation, Symrise adds a new facet to its portfolio of sensory ingredients (including the long-established cooling range Frescolat®) and thus underlines its leadership in sensorial cosmetic ingredients.
The gentle warming sensation of Thermolat can also help to enhance the perceived efficacy of a personal care product.
Being at the forefront of emotion measurement, Symrise has developed a test methodology to evaluate the sensation generated by the topical application of a cosmetic product.
The results show that Thermolat® has a positive impact on the mood balance upon application at 1% and can easily be associated with feelings of well-being and satisfaction.
Thermolat is liquid and odorless and starts working within five minutes after application to the skin.
The warming sensation may last up to two hours.
“Thanks to its safe and gentle effect, Thermolat® can be used in a very wide range of care and beauty products and gives them the ability to create a cozy warm feeling,” explained Caroline Baptiste, Global Product Manager at Symrise.
Thermolat acts as a heating agent.
Thermolat generates a pleasant warm feeling in skin care applications like creams, gels and masks.
Thermolat starts providing its effects within the first five minutes after application and continues performing for up to two hours.
Thermolat helps to enhance the perceived efficacy of a personal care product.
Thermolat can be used in a very wide range of care and beauty products.
Thermolat acts as a heating agent. It generates a pleasant warm feeling in skin care applications like creams, gels and masks.
Thermolat is Patented, non-irritating warming ingredient
Thermolat is Pleasant warming effect within 5 minutes, lasts up to 2 hours
Thermolat Brings comfort upon warming and enhances the perception of a texture performance
Thermolat is No irritating or burning side effects
Thermolat is Colorless to light yellow liquid, odorless
Thermolat is Oil-soluble
Thermolat is Optimal for pH 4-7
Thermolat has Food grade - suitable for oral care
Thermolat is China compliant
CHEMICAL PROPERTIES OF THERMOLAT
INCI: Vanillyl Butyl Ether, 1,2-Hexanediol, Caprylyl Glycol, Ascorbyl Palmitate.
Form: Clear odourless liquid.
Solubility: Oil
pH Stability: 4-7
Recommended Use Level: 0.1-1.0% - see below for further guidelines.
SAFETY INFORMATION ABOUT THERMOLAT:
First aid measures:
Description of first aid measures:
General advice:
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Move out of dangerous area:
If inhaled:
If breathed in, move person into fresh air.
If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact:
Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
Consult a physician.
In case of eye contact:
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Continue rinsing eyes during transport to hospital.
If swallowed:
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Rinse mouth with water.
Consult a physician.
Firefighting measures:
Extinguishing media:
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas
Advice for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental release measures:
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment.
Avoid breathing vapours, mist or gas.
Evacuate personnel to safe areas.
Environmental precautions:
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up:
Soak up with inert absorbent material and dispose of as hazardous waste.
Keep in suitable, closed containers for disposal.
Handling and storage:
Precautions for safe handling:
Avoid inhalation of vapour or mist.
Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Storage class (TRGS 510): 8A: Combustible, corrosive hazardous materials
Exposure controls/personal protection:
Control parameters:
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Exposure controls:
Appropriate engineering controls:
Handle in accordance with good industrial hygiene and safety practice.
Wash hands before breaks and at the end of workday.
Personal protective equipment:
Eye/face protection:
Tightly fitting safety goggles.
Faceshield (8-inch minimum).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection:
Handle with gloves.
Gloves must be inspected prior to use.
Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
Full contact:
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
It should not be construed as offering an approval for any specific use scenario.
Body Protection:
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection:
Where risk assessment shows air-purifying respirators are appropriate use a fullface respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls.
If the respirator is the sole means of protection, use a full-face supplied air respirator.
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.
Stability and reactivity:
Chemical stability:
Stable under recommended storage conditions.
Incompatible materials:
Strong oxidizing agents:
Hazardous decomposition products:
Hazardous decomposition products formed under fire conditions.
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas.
Disposal considerations:
Waste treatment methods:
Product:
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging:
Dispose of as unused product.
