PRODUCTS

TITANIUM DIOXIDE RC 823

CAS Number = 13463-67-7

Technical data parameter
TiO2 content   min 94.0 %
Classification   R2
Oil absorption   18 – 21 g/100 g
Humidity (by packing)   max 0.5 %
pH   7.0 – 8.0
Sieve residue (µm40)   max 0.01 %
CIE Lab (powder)
L*   min 97.5
b*   max 2.5

RC 823 is a micronized rutile pigment produced by the sulphate process. The pigment is lattice-stabilized with alumina and surface-treated with aluminium and silicon compounds. A special organic treatment provides excellent dispersion and high grade of gloss.

ITANIUM DIOXIDE RC 823 is a micronized rutile, titanium dioxide pigment. It is produced by the sulfate process. It is lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. A special organic treatment provides excellent dispersion and high grade of gloss. TITANIUM DIOXIDE RC 823 is recommended for dispersion paints (exterior, interior), industrial and decorative coatings (water and solvent-based). It is also suitable for primers, plaster paints and powder coatings (exterior, interior).

TITANIUM DIOXIDE RC 823 is a micronized rutile, titanium dioxide pigment produced by the sulfate process (CINKARNA CELJE SLOVENIA). It is lattice-stabilized with aluminum and silicon compounds. A special organic treatment provides excellent dispersion and high grade of gloss. It is used in masterbatches.

RC 823 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial and decorative coatings, package lacquers, and powder coatings, among other applications.

RC 833 is a micronized rutile pigment produced by CINKARNA CELJE - SLOVENIA. The pigment is lattice-stabilized with alumina and surface-treated with aluminium and zirconium compounds. The pigment RC 833 possesses enhanced hydrophilic properties due to a special organic treatment. It belongs to the "HIGH-DURABILITY" - class.

Titanium dioxide was considered by a previous Working Group in October 1988
(IARC, 1989). Since that time, new data have become available, and these have been
included in the present monograph and taken into consideration in the evaluation.

Cinkarna TiO2 is a micronized white rutile pigment and is lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds.
RC-82 - For general purpose
RC-84 - For use where light and weather stability are needed
RC-823 - For high gloss and excellent dispersion

To assist with new classifications of TiO2 white pigment powder form which are due to come into effect from October 2021, Devine Chemicals now offers high-quality grades of TiO2 pigment in white liquid form to give businesses the option of continuing to use the pigment in a significantly less inhalable form. Our new Titanium Dioxide liquid grades enables a wider variety of products to choose from to optimise systems and supports our commitment to deliver differentiated, high-performance products.

Our DeSPERSE Liquid TiO2 has the same benefits as the powder form including exceptional opacity and whiteness, high durability, outstanding weather resistance, strong tinting strength and high covering power.

These Titanium Dioxide liquid grades are suitable for a range of applications including:

Paints
Plastics
Inks
Paper
Coatings
We have fully dispersed the TiO2 pigment into different systems to suit all needs, including:

Water-based Acrylic Dispersion
Water-based Surfactant (Resin Free) Dispersion
Low Concentration Water-based Dispersion for Tint Machines
Universal Solvent-based Dispersion
100% UV Monomer Dispersion

Applications
- dispersion paints (exterior, interior)
- industrial and decorative coatings (water and solvent base),
- package lacquers,
- primers,
- powder coatings (exterior, interior),
- masterbatches,
- plaster paints,
- leveling products.

Applications:
- dispersion paints (exterior, interior),
- industrial and decorative coatings (water and solvent base),
- high gloss dispersions,
- radiator paints,
- coil-coatings,
- domestic appliance finishes,
- powder coatings (exterior, interior),
- plaster paints,
- plaster paints based on synthetic resins,
- printing inks.

Packaging
- 25 kg in multiply paper sacks, packed 40 sacks per pallet, wrapped with a shrinkable foil suitable for
recycling.
- Big-bags up to 1000 kg.
- Bulk road tankers containing up to 23 t by request.

1. Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier: Titanium dioxide pigments (TMP grades) RC 813, RC 823, RC 833,RC 843, RC 893
REACH registration number : 01-2119489379-17-0014

1.2. Relevant identified uses of the substance/mixture and uses advised against: White pigment for application in paints, coatings, plastic material, paper, enamel, ceramics.
For industrial use only.

1.3. Details of the supplier of the safety data sheet (manufacturer, importer, only representative , downstream user or distributor):

1.4. Emergency phone number: In case of health risk, consult your doctor.

2. Hazards identification
2.1. Classification of substance or mixture: Regulation (EC) No 1272/2008: Not classified. Not a hazardous
mixture.

2.2. Label elements: Not applicable.
Additional Labelling :
EUH210 Safety data sheet available on request.
EUH212 Warning! Hazardous respirable dust may be formed when
used. Do not breathe dust.

2.3. Other hazards: Mixture contains no persistent, bioaccumulative and toxic (PBT) or
very persistent and very bioaccumulative(vPvB) components at levels
0,1% or higher

3. Composition/information on ingredients
Substances/ mixture: Mixture
Chemical name CAS No.
Classification according to Regulation (EC) No
1272/2008 (CLP)
Titanium dioxide 13463-67-7
236-675-5
01-2119489379-17-0014 80 – 99.5
Trade name: Titanium dioxide
Trimethylolpropane (TMP) 77-99-6
201-074-9
01-2119486799-10-XXXX 0,10 -0,45 Reprotox. 2 ; H361fd
Additional Information: Please refer to section 16 of the SDS for full hazard statements.
Based upon reproductive toxicity study (OECD 443), the manufacturer and others of its consortium membership self- classified TMP as a suspected
reproductive toxicant (Repr. Cat 2). The group also determined new Derived No Effect Levels (DNEL). The new suggested TMP DNEL for workers by
inhalation is 3.3mg/m3(Long term, systemic)

2. HAZARDS IDENTIFICATION
This preparation is not classified as dangerous according to Directive 1999/45/EC and its amendments.
Physical hazards Not classified as a physical hazard.
Health hazards Prolonged exposure may cause chronic effects.
Environmental hazards Not classified as an environmental hazard.
Specific hazards Dusts or powder may irritate the respiratory tract, skin and eyes.
Frequent inhalation of fume/dust over a long period of time may increase the risk of developing lung diseases although epidemiological studies among titanium dioxide workers could not demonstrate this.
Main symptoms Upper respiratory tract irritation.
Coughing.
Irritation of eyes and mucous membranes.
Skin irritation.

HANDLING AND STORAGE
Handling Avoid inhalation of dust and contact with skin and eyes. Use only with adequate ventilation. Use Personal Protective Equipment recommended in section 8 of the MSDS.
Wash thoroughly after handling. Observe good industrial hygiene practices.
Storage Store in tightly closed original container in a dry and cool place. Store in a closed container away from incompatible materials.

REGULATORY INFORMATION
Regulatory information The product does not need to be labelled in accordance with EC directives or respective national laws. This Safety Data Sheet complies with the requirements of Regulation (EC) No 1907/2006.

ECOLOGICAL INFORMATION
Ecotoxicity The product is not expected to be hazardous to the environment.
Environmental effects An environmental hazard cannot be excluded in the event of unprofessional handling or disposal.
Persistence and degradability The degradability of the product has not been stated.
Bioaccumulation Bioaccumulation is unlikely to be significant because of the low water solubility of this product.
Mobility The product is insoluble in water and will sediment in water systems.

DISPOSAL CONSIDERATIONS
Disposal instructions Disposal recommendations are based on material as supplied. Disposal must be in accordance with current applicable laws and regulations, and material characteristics at time of disposal.
Dispose of this material and its container to hazardous or special waste collection point. Do not allow this material to drain into sewers/water supplies.
Waste from residues / unused products.
Dispose of in accordance with local regulations.
Contaminated packaging Since emptied containers may retain product residue, follow label warnings even after container is emptied.
EU wastecodes 06 11 99

Synonyms:

TITANIUM DIOXIDE
Rutile
dioxotitanium
13463-67-7
Anatase
Titania
Titanium(IV) oxide
1317-70-0
1317-80-2
Titanium White
Anatase (TiO2)
Flamenco
Hombitan
Titafrance
Titandioxid
Titanium oxide (TiO2)
Tiofine
Tioxide
Tipaque
Titanox
Rayox
Rutile (TiO2)
Bayertitan A
Titanic anhydride
Rutiox CR
Tioxide RHD
Tioxide RSM
Titanox RANC
Zopaque LDC
A-Fil Cream
Calcotone White T
Tioxide A-DM
Tioxide AD-M
Tioxide R-CR
Tioxide R-SM
Tioxide R.XL
Bayertitan R-U-F
Levanox White RKB
A-Fil
Runa rh20
Unitane or-150
Unitane or-340
Unitane or-342
Unitane or-350
Unitane or-540
Unitane or-640
Austiox R-CR 3
Cab-O-Ti
Hombitan R 101D
Hombitan R 610K
Unitane o-110
Unitane o-220
Horse head a-410
Horse head a-420
Horse head r-710
Kronos RN 40P
Kronos RN 56
Tipaque R 820
Titanox 2010
Unitane OR 450
Unitane OR 650
Kronos CL 220
Kronos titanium dioxide
Kronos 2073
Runa ARH 20
1700 White
P 25 (oxide)
C.I. Pigment White 6
Runa ARH 200
Ti-Pure R 900
Ti-Pure R 901
Titanium peroxide (TiO2)
Tiona t.d.
Atlas white titanium dioxide
C-Weiss 7
Titanium(IV) oxide, anatase
Cosmetic White C47-5175
Cosmetic White C47-9623
RO 2
NCI-C04240
Titanium(IV) oxide, rutile
KH 360
CI 77891
TiO2
C.I. 77891
E 171
R 680
Titanium dioxide [USP]
Brookite
MFCD00011269
Octahedrite
Sagenite
Tichlor
Unitane
Zopaque
Kronos
Tronox
Titanic oxide
Titanium dioxide (USP)
Bayertitan T
Tiona td
Titan White
Anatase titanium dioxide
Tin dioxide dust
Titanium peroxide
Uniwhite AO
Uniwhite KO
Trioxide(s)
Unitane OR
Pigment white 6
Ti-Pure
Bayertitan AN 3
Austiox R-CR
Tioxide A-HR
Tioxide R XL
Bayertitan R-U 2
Bayertitan R-FK-D
Aerosil P 25
Aerosil P 27
Bayertitan R-FD 1
Bayertitan R-KB 2
Bayertitan R-KB 3
Bayertitan R-KB 4
Bayertitan R-KB 5
Bayertitan R-KB 6
Titandioxid (sweden)
Aerolyst 7710
CI Pigment white 6
Uniwhite OR 450
Uniwhite OR 650
Tinoc M 6
Aerosil P 25S6
Aerosil T 805
Octahedrite (mineral)
AK 15 (pigment)
Titandioxid [Swedish]
Bayer R-FD 1
Blend White 9202
63B1 White
Bayertitan
Bayertitan R-FK 21
Titanium oxide (VAN)
A 200 (pigment)
A 330 (pigment)
Amperit 780.0
B 101 (pigment)
Baytitan
Kronos 1002
R 830 (mineral)
Unitane 0-110
Unitane 0-220
C-Weiss 7 [German]
MC 50 (oxide)
C 97 (oxide)
CG-T
NT 100 (oxide)
MFCD00210650
Bayertitan R-V-SE 20
S 150 (oxide)
Titanium(IV) oxide, catalyst support
Bistrater L-NSC 200C
15 wt% Titanium Oxide in Water Nano
Titanium(IV) oxide, Aeroxide(R) P25
CCRIS 590
Titanium(IV) oxide, 98+%, anatase powder
A-FN 3
HSDB 869
NCI-C0424O
Titanium(IV) oxide, 98.0-100.5% TiO2
O2Ti
AUF 0015S
AMT 100
AMT 600
JR 600A
Rutile titanium dioxide
Cosmetic Hydrophobic TiO2 9428
234DA
500HD
Cosmetic Micro Blend TiO2 9228
EINECS 215-280-1
EINECS 215-282-2
EINECS 236-675-5
CL 310
NSC 15204
Orgasol 1002D White 10 Extra Cos
Titanium(IV) Oxide, Anatase Nanoparticles / Nanopowder
1385RN 59
AI3-01334
BR 29-7-2
CCRIS 9317
CCRIS 9325
Titanium-Dioxide
Titanium(IV) oxide, 99.999%, (trace metal basis), predominantly rutile
dioxyde de titane
(rutile)
bis(oxido)titanium
dioxido de titanio
component of A-Fil
TITANIUM DIOXIDE ENAMEL GRADE
98084-96-9
Titanium(IV) oxide,
oxido de titanio(IV)
Titanium Oxide Anatase
Titanium oxide, TiO2
Titanium Dioxide Rutile
Titanium( cento) oxide
Titania paste, reflector
Titanium oxide (JP17)
Titanium dioxide (TiO2)
Titania paste, transparent
WLN: TI O
EC 215-282-2
EC 236-675-5
[TiO2]
Titania paste, active opaque
Titanium(IV) oxide nanopowder
Titanium (IV) Oxide Anhydrous
Titanium(IV) oxide, 1 micron
Titanium(IV) oxide, 98.0%
CHEBI:32234
s212
TITANIUM DIOXIDE (ANATASE)
NSC15204
Titanium(IV) oxide, sintered lump
Nano Titanium Dioxide Anatase Powder
NSC-15204
AKOS015913799
DB09536
Titanium Dioxide-Rutile type BLR-699
Titanium(IV) oxide, high surface area
Titanium Dioxide Anatase type BLA-200
NCGC00187590-01
Titanium dioxide, NIST(R) SRM(R) 154c
Titanium(IV) oxide, rutile, single crystal
FT-0645791
FT-0778081
Titanium Oxide (anatase) Powder, 99% Nano
D01931
T-3875
Titanium(IV) oxide, ReagentPlus(R), >=99%
Q193521
Titanium(IV) oxide, SAJ first grade, >=98.0%
J-006053
Titanium(IV) oxide, JIS special grade, >=99.0%
Titanium(IV) oxide, Vetec(TM) reagent grade, 99%
Titanium dioxide, NIST(R) SRM(R) 1898, nanomaterial
Titanium(IV) oxide, 20-35% in H2O colloidal dispersion
Titanium(IV) oxide, rutile, >=99.98% trace metals basis
Titanium(IV) oxide, rutile, 99.995% trace metals basis
Titanium dioxide (airborne, unbound particles of respirable size
Titanium(IV) oxide, anatase, powder, 99.8% trace metals basis
Titanium(IV) oxide, nanowires, diam. x L ~10 nm x 10 mum
Titanium(IV) oxide, nanowires, diam. x L ~100 nm x 10 mum
Titanium dioxide, NIST RM 8988, powder, particle size distribution
Titanium(IV) oxide, pellets, diam. x thickness 12.5 mm x 5.5 mm
Titanium dioxide, United States Pharmacopeia (USP) Reference Standard
Titanium Oxide Dispersion (Anatase, 20 wt%, 5-30 nm) Nano in Water
Titanium(IV) oxide, anatase, powder, -325 mesh, >=99% trace metals basis
Titanium(IV) oxide, rutile, powder, <5 mum, >=99.9% trace metals basis
Titanium(IV) oxide, anatase, nanopowder, <25 nm particle size, 99.7% trace metals basis
Titanium(IV) oxide, naturally occurring mineral, grains, approximately 0.06-0.19in
Titanium(IV) oxide, rutile, nanopowder, <100 nm particle size, 99.5% trace metals basis
Titanium(IV) oxide, contains 1% Mn as dopant, nanopowder, <100 nm particle size (BET), >=97%
Titanium(IV) oxid, mixture of rutile and anatase, nanoparticle, <250 nm particle size (DLS), paste, 53-57 wt. % in diethylene glycol monobutyl ether/ethylene glycol, 99.9% trace metals basis
Titanium(IV) oxide, mixture of rutile and anatase, nanoparticles, <100 nm particle size, dispersion, 48-52 wt. % in xylene, 99.9% trace metals basis
Titanium(IV) oxide, mixture of rutile and anatase, nanoparticles, <150 nm particle size (volume distribution, DLS), dispersion, 33-37 wt. % in H2O, 99.5% trace metals basis
Titanium(IV) oxide, mixture of rutile and anatase, nanopowder, <100 nm particle size (BET), 99.5% trace metals basis
Titanium(IV) oxide, nanopowder, 21 nm primary particle size (TEM), >=99.5% trace metals basis
Titanium(IV) oxide, puriss., meets analytical specification of Ph. Eur., BP, USP, 99-100.5%
Titanium(IV) oxide, rutile, <001>, (single crystal substrate), 99.99% trace metals basis, L x W x thickness 10 mm x 10 mm x 0.5 mm
Titanium(IV) oxide, rutile, <100>, (single crystal substrate), 99.99% trace metals basis, L x W x thickness 10 mm x 10 mm x 0.5 mm
Titanium(IV) oxide, rutile, <110>, single crystal substrate, 99.99% trace metals basis, L x W x thickness 10 mm x 10 mm x 0.5 mm