PRODUCTS

TROYSAN V450

CAS: 26530-20-1

TROYSAN V450 is a broad-spectrum preservative that protects water-based paints, coatings, wood preservatives, stains, leather intermediates, functional fluids and other materials against a wide variety of microorganisms (especially yeast, surface mold, staining fungi and mildew).

TROYSAN V450 is a broad-spectrum, dry-film preservative for various applications.

TROYSAN V450 is a is a dry-film preservative that provides protection against fungal and algal growth on surfaces.

ACTIVE INGREDIENT: % Weight
2-n-octyl-4-isothiazolin-3-one: 45.0%
INERT INGREDIENTS: 55.0%
TOTAL: 100%

TROYSAN V450 is an industrial preservative for use in aqueous adhesives, wallpaper pastes and tackifiers, building materials, coatings, emulsions, polymers and polyurethanes, hydraulic fluids, metalworking fluids, textiles, linens, fabrics, fabric surfaces, vinyls and plastics.

TROYSAN V450 is an industrial preservative and anti-mold agent for the protection of wood coatings and wood coating solutions, including Sapstain Control.

TROYSAN V450 is a broad spectrum preservative that protects water-based paints, coatings, wood preservatives, stains, leather intermediates, functional fluids and other materials from a wide range of microorganisms (especially yeast, surface mold, stain fungi and mildew).

USES:

Hydraulic Fluids:
For use as a preservative in the manufacture and use of soluble oils, hydraulic fluids with a high water content and emulsions.
TROYSAN V45O should be applied directly to the hydraulic concentrate or use a diluting hydraulic fluid with a metering pump and spread evenly throughout the fluid.
Heavily contaminated systems must be cleaned prior to application of TROYSAN V45O.

For liquid concentrates, add TROYSAN V45O in an amount sufficient to ensure that the dilution liquid for end use contains 55-165 ppm product (25-73 ppm active ingredient).

For thinner fluids, add 0.47-1.44 lb TROYSAN V45O per 1000 gallons of emulsion.
Repeat until microbiological control is achieved.
For maintenance use add 0.09-0.58 lb TROYSAN V45O per 1000 gallons of emulsion every 4-6 weeks.
This will provide a 5-30 ppm emulsion of the active ingredient.
More frequent dosing may be required depending on the degree of microbial contamination and system design.

Metalworking Fluids:
TROYSAN V45O is recommended for fungus control in the manufacture and use of soluble, synthetic and semi-synthetic metalworking fluids.

TROYSAN V45O can be applied with a metering pump for uniform application to the liquid.
For liquid concentrates, add TROYSAN V45O at a rate that will provide 55-165 ppm product (25-73 ppm active ingredient) in the diluted metalworking fluid.

Use-Thinning Fluids:
For systems with visibly fouled, use 0.47-1.44 lb TROYSAN V45O per 1000 gallons of fluid.
Repeat until you gain control.
For maintenance use add 0.09-0.58 lb TROYSAN V45O per 1000 gallons of fluid every 4-6 weeks.
Depending on the degree of microbial contamination and system design, higher dose rates and/or frequency of use may be required.

Textiles, Laundry Cloth and Fabric Surfaces:
To prevent the growth of bacteria and fungi in the presence of moisture in and on fibres, textiles and fabrics, including carpets and base materials.
Not for use in carpet fibers.
For use as a preservative, use TROYSAN V45O at 0.1-0.25% by weight.

Vinyl and Plastics:
For use as a preservative for PVC floors and walls, automotive interior parts, refrigerator gaskets, shower curtains, mattress pads, raincoats, shoes, PVC slippers, and gloves.
Use TROYSAN V45O at the rate of 0.1-0.5% of the total weight of the preparation (corresponds to 0.05-0.5% of platisol).
TROYSAN V45O can also be used to preserve other plastic products such as automotive tops and exteriors, tarps, tents, sheds, indoor and outdoor carpet underlay, garden hoses, pool and pond liners, marine upholstery, roofing, PVC roof tiles etc. fibers.
TROYSAN V45O is used in an amount of 0.15-0.75% of the total weight of the composition (corresponding to 4.35 pounds per 1000 pounds of compound).

TROYSAN V45O is best added to the plasticizer during production.

Octhilinone is a member of the class of 1,2-thiazole that is 1,2-thiazol-3-one substituted on the nitrogen (position 2) by an octyl group.
A fungicide and antibacterial agent, Octhilinone is used for treatment of canker and other fungal and bacterial diseases in fruit trees.
Octhilinone has a role as an environmental contaminant, a xenobiotic, an antifungal agrochemical and an antibacterial agent.

SYNONYMS:
Octhilinone
26530-20-1
2-octylisothiazol-3(2H)-one
2-n-Octyl-4-isothiazolin-3-one
2-Octyl-4-isothiazolin-3-one
2-Octyl-3-isothiazolone
Pancil
2-Octyl-2H-isothiazol-3-one
3(2H)-Isothiazolone, 2-octyl-
Kathon 893
2-Octyl-3(2H)-isothiazolone
Skane 8
Skane M-8
Kathon 893F
Micro-chek skane
Kathon LM
Microbicide M-8
2-octyl-1,2-thiazol-3-one
Micro-chek 11
Micro-chek 11D
Kathon SP 70
Kathon LP preservative
Kathon 4200
4-Isothiazolin-3-one, 2-octyl-
UNII-4LFS24GD0V
Octyl-3(2H)-isothiazolone
2-Octyl-3-isothioazolone
2-Octyl-3-isothiazolinone
Octyl-4-isothiazol-3-one
2-n-Octyl-3-isothiazolone
4LFS24GD0V
MLS002415697
CHEBI:81936
SMR001370885
DSSTox_CID_5805
Pancil-T
DSSTox_RID_77928
DSSTox_GSID_25805
Skane M8
Caswell No. 613C
Kathon
Vinylzene IT 3000DIDP
RH 893
CAS-26530-20-1
Octhilinone [ANSI:BSI:ISO]
CCRIS 6082
EINECS 247-761-7
EPA Pesticide Chemical Code 099901
BRN 1211137
Pancil T
2-octyl-1,2-thiazol-3(2H)-one
Skane M 8
Vinyzene IT 3000DIDP
SCHEMBL15648
cid_33528
SCHEMBL396433
CHEMBL1562104
DTXSID1025805
BDBM66023
HSDB 6713
2-Octyl-4-Isothiazolin-3-Ketone
ZINC2012904
Tox21_201459
Tox21_300566
MFCD00072473
RH-893
AKOS015897428
NCGC00091875-01
NCGC00091875-02
NCGC00091875-03
NCGC00091875-04
NCGC00091875-05
NCGC00254466-01
NCGC00259010-01
AS-11894
Octhilinone 10 microg/mL in Acetonitrile
DB-028182
FT-0613248
O0343
O0378
C18752
D91863
530O201
Q2013949
W-107168
2-Octyl-4-isothiazolin-3-one, PESTANAL(R), analytical standard