Quick Search

PRODUCTS

TROYSAN ZPT38

TROYSAN ZPT38


CAS: 13463-41-7

TROYSAN ZPT38 is a dry-film preservative product with broad-spectrum activity against fungi, bacteria and algae. 
TROYSAN ZPT38 offers low solubility of active ingredients, providing excellent leach resistance and long-lasting performance properties in technical applications. 
TROYSAN ZPT38 is widely compatible in aqueous formulations.


Active Ingredients:
Zinc pyrithione (Zinc, 2-pyridinethiol-1-oxide): 38%
Inert Ingredients: 62%
Total: 100% 

DIRECTIONS FOR USE 


Dry-film preservation: protects the dry film itself and does not protect the underlying surface from attack by algae, fungi, mildew or bacteria.
For the dry-film preservation of flooring and other non-food contact adhesives, caulks, sealants, grouts and patching compounds :


Adhesives: For fungal control add 1900 ppm of this product and for bacterial control add 6100 ppm 
(Add 1.9 lbs. of this product to 1000 lbs. of adhesive to control fungus and add 6.1 lbs. per 1000 lbs. of adhesive to control bacteria.)


Caulks/Sealants: For fungal control add 5300 ppm of this product and for bacterial control add 12,760 ppm of this product. 
(Add 5.3 lbs. of this product per 1000 lbs. of caulk/sealant to control fungus, add 12.76 lbs. of this product per 1000 lbs. to control bacteria.) 


Grouts/Patching Compounds: For fungal control add 2550 ppm of this product and for bacterial control add 10,100 ppm of this product. 
(Add 2.55 lbs. of this product to 1000 lbs. of grouts/patching compounds to control fungus and 10.1 lbs. of this product per 1000 lbs. to control bacteria.) 


For Aqueous Latex and Other Types of Architectural and Industrial Non-Marine Paints and Coatings Including Powder Coatings: Addition of up to 12,760 ppm of this product can inhibit the growth of algae, bacterial slime, mildew, and other fungi. 
TROYSAN ZPT38 can be added at any time during the formulation procedure. 
(For example, add 12.76 lbs. of this product to 100 gallons of wet paint for a typical paint having the density of 10 lbs. per gallon.) 


For the Dry-Film Preservation of Residential Latex Paints: Use a minimum of 6400 ppm of this product. 
For maximum protection against the growth of algae, and/or fungi causing stains, odor or film degradation, use 12,760 ppm of this product. 
For control of bacteria causing stains, odor or film degradation of the dry paint film surface use 6400 ppm of this product. 
(Add a minimum of 6.4 lbs. of this product to 100 gallons of wet paint, with a density of 10 lbs. per gallon, to control fungi, bacteria or algae. 
Add a maximum of 12.76 lbs. of this product to 100 gallons.) 


(For Unit Dose Packages of 10.4 ml & 49.4 ml unit-dose packets): For dry-film preservation in interior/low humidity conditions: For each gallon of paint with an approximate density of 10 gal. use one 10.4 ml packet (0.35 fl. oz. or 13 grams) which provides a dosage of 3000 ppm of this product. 
For more severe conditions of exposure to weather or humidity, use 2 packets (which provides a dosage of 6000 ppm of this product). 
For each 5 gallons of paint, use one 49.4 ml packet-1.66 fl. oz. or 62 grams) which provides 2800 ppm of this product. 
For more severe conditions of exposure to weather or humidity use 2 packets (which provides a dosage of 5600 ppm of this product). 


For the Dry-Film Preservation of Joint Compounds, Glazing Compounds and Wood Fillers: Addition of up to 12760 ppm (12.76 lbs. per 1000 lbs. of formulation) of this product will inhibit the growth of fungi causing stains, odor or film degradation and bacteria causing stains, odor or degradation. 
This product can be added at any time during the formulation procedure. 


For the Preservation of Styrene Butadiene Rubber and Thermoplastic Resins Used in the Manufacture of the Following Products: 
Rubber bands, carpet fibers, carpet backings, rubber or rubber-backed bath mats; 
foam underlay for carpets, synthetic, non-leather materials; 
foam stuffing or cushions for mattresses; wire and cable insulation, vinyl, linoleum and synthetic floor coverings; 
wall coverings; plastic furniture; rubber/wood flour composite; 
wood plastic composite products (non-food) uses: Athletic flooring and mats; mattress liners, covers or ticking; molding, mats, gaskets, weather stripping; 
coated fabrics for furniture cushions, boat covers, tents, tarpaulins; 
awnings; non-surgical rubber gloves; garbage bags; refuse containers; bathtub appliques; garden hose; non-potable water pipe; ductwork; 
air filters; air filtration components and air filtration media for industrial, hospital, residential and commercial heating and cooling; shower curtains; sponge or fiber mops; household use sponges; toilet brush receptacles; toothbrush receptacles (non-bristle contact); 
sink mats and drain boards; storage containers; soap dish holders; towel bars; components of footwear and toilet seats. 
Addition of up to 10100 ppm (10.1 lbs. per 1000 lbs. of formulation) of this product can inhibit growth of bacteria and fungi causing stains, odor or product degradation in styrene butadiene rubber and thermoplastic resins such as vinyl chloride-vinyl acetate copolymers, polyurethanes, polyamides, polyolefins, polystryrene, polyesters and acrylonitrile copolymers. 
It can be added at a time during the formulation procedure that will ensure uniform distribution throughout the polymer system. 
Add by pouring or by use of metering equipment. 
To inhibit fungi in polyurethane footwear components add 5100 ppm (5.1 lbs. per 1000 lbs. of formulation) of this product to the polyurethane formulation. 


For the In-Can Preservation of Latex Emulsions, Clay, Mineral, Pigment and Guar Gum Slurries Used in the Manufacture of Adhesives, Caulks, Patching Compounds, Sealants and Grouts: Use up to 12760 ppm to control bacteria and fungi causing stains, odors and product degradation. 
This dosage is equivalent to 12.76 lbs. of this product per 1000 lbs. of slurry and can be added at any time in the formulation process. 


For the Preservation of Ceilings, Ceiling Tile, Walls and Partitions: Use up to 10100 ppm of TROYSAN ZPT38 (10.1 lbs. per 1000 lbs. of formulation, i.e. wet slurry) to inhibit the growth of bacteria and fungi causing stains, odor or product degradation. 
TROYSAN ZPT38 can be added at any time in the formulation process, alternatively the product may be added to latex or other types of coatings systems routinely applied to the surfaces of walls, ceiling tiles, partitions, etc. at the same dosage as above. 


Laundered Fabrics: To inhibit bacteria and fungi caused stains, odor or degradation of natural and synthetic fabrics, including polyamide, nylon, polypropylene, polyethylene, polyesters, wool, polybenzimdiazole, polyparaphenylene phthalamides, cellulosics and blends of these polymers. 
At a sour density of 8.3 pounds per gallon, add 8-23 ounces of this product per 1000 lbs. dry weight of fabric to reach a use level of 48 to 142 ppm.
Apply to the sour operation and run for a minimum of five minutes. 
TROYSAN ZPT38 is to be used in industrial applications. 
TROYSAN ZPT38 is not intended for us in residential, commercial or institutional settings. 


Indirect Food Contact Uses
To Control Growth of Bacteria and Fungi in Adhesives used in Food Packaging:
For food packaging adhesives, at use temperatures up to 120°F and subject to Good Manufacturing Practices in addition to the conditions specified in 21 CFR 175.105 (a) and (b) add a dosage of 2000 ppm to a maximum of 2600 ppm of this product (2.0 to 2.6 lbs of this product per 1000 lbs. of food packaging adhesive) and ensure thorough mixing. 


To Control Growth of Bacteria and Fungi in Latex Emulsions or Aqueous Inorganic Slurries Used In the Manufacture of Food Contact Coated Paper: 
To control bacterial and fungal growth in aqueous paper coatings and paper coating components including latex, starch solutions, mineral or pigment slurries (clay, kaolin calcium carbonate or titanium dioxide) at a dosage not to exceed 1300 ppm of this product in the paper coatings components and not exceed 250 ppm of this product in the paper coating formulation. 
Can be added at any point in the paper coating process. 

STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage or disposal.

Pesticide Storage: Do not freeze. 
Store above 50°F. 
Keep container tightly closed when not in use. 
Do not store with strong oxidizing agents or strong (concentrated) acids. 


SYNONYMS:

Zinc pyridinethione
ZnPT
2-Mercaptopyridine N-Oxide Zinc Salt
zinc;1-oxidopyridine-2-thione
2-Pyridinethiol 1-Oxide Zinc Salt
1-Hydroxypyridine-2-thione zinc salt
Zincpolyanemine
Zinc pyrethion
Zinc pyrithone
zinc 1-oxidopyridine-2-thione
Omadine Zinc
Wella Crisan
Top Brass
Vancide P
Vancide ZP
Zinc - pyrion
Head and Shoulders
Zn - pyrion
ZINCPYRITHIONE
Zinc pyrithione(USAN
Sebulon Shampoo (TN)
Zincon Dandruff Shampoo
Zinc pyrithione (JAN)
Pyrithione zinc derivative
Breck One Dandruff Shampoo
UNII-R953O2RHZ5
Pyrithione zinc (USAN/INN)
SCHEMBL136623
Zinc 2-pyridinethiol 1-oxide
zinc 1-oxido-2-pyridinethione
GTPL2597
R953O2RHZ5
Zinc pyridine-2-thiol-1-oxide
CHEMBL1200471
CHEMBL3392049
Zinc 2-mercaptopyridine N-oxide
CHEBI:32076
Zinc, bis(1-hydroxy-2(1H)-pyridinethionato-O,S)-(T-4)-
zinc 1-oxidanidylpyridine-2-thione
zinc 1-oxidopyridin-1-ium-2-thiol
NSC290409
AKOS015891514
AKOS015951268
NSC-290409
Bis(2-pyridylthio) Zinc 1,1'-Dioxide
NCGC00091933-02
AC-13775
Zinc, bis(2-pyridylthio)-, 1,1'-dioxide
Zinc, bis(2-pyridylthio)-, N,N'-dioxide
FT-0636895
M0633
Zinc, bis(2-pyridinylthio)-, N,N'-dioxide
{Bis[1-hydroxy-2(1H)-pyridinethionato]zinc}
D01938
A806815

  • Share !
E-NEWSLETTER