Tylose® HS 100000 YP2
Constitution: Hydroxyethyl cellulose
Tylose® HS 100000 YP2
Product properties
Constitution: Hydroxyethyl cellulose
Appearance: white powder Delayed solubility: yes
Etherification: high etherification Biostability: yes
Particle size: powder Level of viscosity: 100000 mPa·s
according to Höppler
Product specification Recommended fields of application
Moisture: ≤ 6 %
Sulfated ash: ≤ 6 %
Particle size: < 180 μm: min. 85%
Particle size: < 100 μm: 45 - 85%
Viscosity: 4200 - 5500 mPa·s
Brookfield RV,20rpM, 1.0%,20°C,20° GH
Additional data
Bulk density: ca. 450 g/l
Etherification (MS): ca. 2.70
Swelling time: ca. 20 min.
Final dissolving time: ca. 30 min.
Interior paints
Exterior paints
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
Application performance
Gloss: high Thickening effect: very high
Pigment compatibility: high Wet scrub resistance: high
Anti-Spattering: unfavourable Water retention: moderate
Pseudoplasticity: high
Packaging, Storage, Safety instructions
Like all fine-particle organic substances, cellulose ethers constitute a dust explosion hazard. Dust formation and deposits must be kept to a minimum so that no ignitable dust/air mixtures can form. Ignition sources such as naked flames, hot surfaces, sparks and static electricity should be avoided. Tylose starts to decompose at about 200°C. Its ignition temperature is >360°C. Tylose burns easily and the fire may spread. When stored in closed containers, or in its original packaging in a dry place at room temperature, Tylose can
be kept for a long time. In the case of high viscosity grades, a slow loss of viscosity can be measured after lengthy storage (>1 year). Tylose absorbs water from moist air. Once opened, container must be resealed and kept tightly closed.
25 kg Valved multi-layer paper sack with polyethylene interleaf
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.