TYLOSE HX 6000 YG4
CAS: 9004-62-0
107-22-2
CHEMICAL: Cellulose, 2 - hydroxyethyl ether, hydrophobically modified, with delayed solubility
Market: Coatings-Architectural, Coatings-Industrial
Application: Exterior Paint, General Industrial Coating, Interior Paint, Protective/Maintenance Coating
Product Type: Additives
Product Category: Rheology Modifiers
Problem To Solve: Compostable/Repulpable/Recyclable, Regulatory / Environmental
Tylose HX 6000 YG4 is a chemically modified hydroxyethyl cellulose recommended for use in exterior, interior and semi-gloss paints.
Tylose HX 6000 YG4 is a water-soluble, non-ionic, chemically modified hydroxyethyl cellulose, in the form of granules, with special etherification.
Tylose HX 6000 YG4 displays increased biostability, very high gloss appearance and pigment compatibility, excellent anti-spattering properties, low pseudoplasticity, moderate thickening effects and water retention, and high wet scrub resistance.
This grade of hydroxyethyl cellulose (HEC) is particularly well-suited for use in interior paint applications.
Tylose HEC (hydroxyethyl cellulose/Tylose H-grades) are soluble in water at any temperature.
Tylose HX 6000 YG4 is nonionic cellulose ethers, which are offered as free flowing powder or in granular form.
Many Tylose HEC grades have a retarded solubility which ensures a lump free solution in aqueous systems.
Tylose HX 6000 YG4 ensures the required consistency for application by providing a certain rheological profile or flow property.
This makes the application of Tylose HX 6000 YG4 paint easy.
The amount of Tylose as well as its viscosity determines the viscosity level and leads to optimal application properties.
During application of Tylose HX 6000 YG4, a decreasing viscosity with increasing shear stress is desirable.
Recommended use of Tylose HX 6000 YG4:
-Rheological Additive
-Special applications
-Coating material
-Chemical for use in construction
PROPERTIES
Physical state : Solid
Appearance : Powder
Colour : whitish
Odour : characteristic
pH : 5.5 - 8 10g/l
Auto-ignition temperature : > 120 °C
Density : Density : 1.1 - 1.5 g/cm³ 20 °C
Solubility : Water: > 10 g/l @ 20°C
Log Pow : < 0
Explosive properties : Product is not explosive. Dust may form explosive mixture in air.
Minimum ignition energy : > 10 mJ
Conbustion class : 5
Smoulder temperature : 280 °C
pmax : 10 bar
Dust explosion category : ST1
KSt : < 200 bar*m/s
Ignition temperature : > 460 °C
Function as Protective Colloid:
Coating materials are predominantly dispersions of pigments and fillers in an aqueous medium.
Tylose HX 6000 YG4 acts as a protective colloid by preventing the agglomeration of the solid particles.
This leads to a better storage stability and easier agitation of the paint.
Due to Tylose HX 6000 YG4s molecular structure and its specific properties, Tylose is a highly effective protective colloid.
Tylose HX 6000 YG4 is widely used in other application fields, such as polymerisation, to avoid the coagulation of the polymer.
Binding Power:
Especially in distempers, Tylose acts as a binder by combining the solid particles and binding them to the substrate.
Tylose HX 6000 YG4 has strong adhesive power, good dry binding power and dry adhesion.
For these reasons, Tylose HX 6000 YG4 ensures a good adhesion between the coating and substrate.
SYNONYMS:
Hydroxyethyl cellulose
Hetastarch
9004-62-0
5-[6-[[3,4-dihydroxy-6-(hydroxymethyl)-5-methoxyoxan-2-yl]oxymethyl]-3,4-dihydroxy-5-[4-hydroxy-3-(2-hydroxyethoxy)-6-(hydroxymethyl)-5-methoxyoxan-2-yl]oxyoxan-2-yl]oxy-6-(hydroxymethyl)-2-methyloxane-3,4-diol
2-Hydroxyethyl cellulose
SCHEMBL23306563
DTXSID60873934
FT-0627136
aldiamed
hydroxyethylcellulose
hydroxyethylcellulose, sodium salt
hydroxyl ethyl cellulose
Lacrigel
Minims Artificial Tears
Natrosol 250
Cellulose hydroxyethylate
HYDROXYETHYLCELLULOSE
Cellulose hydroxyethyl ether
2-Hydroxyethyl cellulose ether
DB11602
GLYOXAL
Ethanedial
107-22-2
Oxalaldehyde
oxaldehyde
1,2-Ethanedione
Glyoxylaldehyde
Biformal
Biformyl
Diformal
Diformyl
Oxal
Aerotex glyoxal 40
Glyoxal aldehyde
Ethanedial, trimer
Ethanediol, trimer
UNII-50NP6JJ975
C2H2O2
Glyoxal, 40% in water
DTXSID5025364
CHEBI:34779
Glyoxal, 40% solution in water
50NP6JJ975
MFCD00006957
NCGC00091228-01
DSSTox_CID_5364
DSSTox_RID_77764
DSSTox_GSID_25364
Glyoxal, 40%
Ethanedione
Glyoxal solutions
CAS-107-22-2
CCRIS 952
ODIX
HSDB 497
Glyoxal solution, ~40% in H2O (~8.8 M)
Glyoxal, 29.2%
EINECS 203-474-9
BRN 1732463
hydroxyketene
Ethandial
Glycoxal
ethane dial
AI3-24108
(oxo)acetaldehyde
ethane-1,2-dial
Protectol GL 40
glyoxal (ethanedial)
oxalic acid dihydride
hydroxymethylene ketone
NSC 262684
Glyoxal, 40 % Solution
EC 203-474-9
Glyoxal solution, 40.0%
4-01-00-03625 (Beilstein Handbook Reference)
BIDD:ER0284
(CHO)2
Glyoxal, Biformyl, Oxalaldehyde
CHEMBL1606435
Glyoxal, 40% w/w aq. soln.
STR01281
ZINC8437750
Tox21_111105
Tox21_202517
BBL011519
NSC262684
STL146635
AKOS000119169
Glyoxal solution, 40 wt. % in H2O
MCULE-3212938778
NSC-262684
NCGC00260066-01
Glyoxal solution, CP, 40 wt. % in H2O
FT-0626792
G0152
X8004
Q413465
J-001740
F2191-0152
Glyoxal solution, ~40% in H2O, for HPLC derivatization
Glyoxal solution, BioReagent, for molecular biology, ~40% in H2O (~8.8 M)