TYLOSE MH 10007 P4

TYLOSE MH 10007 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. 
TYLOSE MH 10007 P4 provides fast consistency development and has moderate sag resistance, water demand, water retention, heat stability, and influence on cement duration. 
TYLOSE MH 10007 P4 is particularly well-suited for use in cement decorative render and EIFS applications.

TYLOSE MH (methyl hydroxyethyl cellulose/TYLOSE MH-grades) are water soluble, nonionic cellulose ethers, which are offered as free flowing powder or in granular form. 
TYLOSE MH may contain further additives which for example control the dissolution behavior or the thickening power.

TYLOSE can be either pressed into the base material or TYLOSE MH 10007 P4 can be applied to the finished granules. 
In the first case, the base material is usually wood powder and the pellets — including TYLOSE — are produced via extrusion. 

TYLOSE is typically added in a dosage of 6 – 7 % w/w.
In the latter case, when TYLOSE is added to finished granules, these should be wetted prior to the application of TYLOSE. 

This enhances the amount of absorption on the surface.
Typical dosage of TYLOSE is 4 – 5 % w/w.

TYLOSE MH 10007 P4 is used by the oil and gas industry for various applications such as rheology modification in fluids for drilling and completion of petroleum and natural gas wells.
TYLOSE MH 10007 P4 grades are used as viscosifiers in drilling fluids, particularly in heavy brines for completion and workover operations. 

Since TYLOSE MH forms stable solutions with high salt concentrations, TYLOSE MH 10007 P4 is perfectly suitable for the viscosifying of these fluids. 
Use of TYLOSE MH 10007 P4  gives other benefits, such as higher drilling rates and increased oil production and TYLOSE MH 10007 P4 is easily degradable with chemical and enzyme based breakers.

Applications of TYLOSE MH 10007 P4:
Mineral decorative plasters,
Adhesives for smooth blocks,
Standard tile adhesive,
Thermal insulation systems,
Gypsum,
joints Cement putty.

TYLOSE products provide the following properties for the oil and gas industry:
Rheology modification,
High salt tolerance,
Fluid loss minimization,
Clear Solution,
Furthermore, TYLOSE HEC as a naturally derived polymer, is easily biodegradable.

Home care of TYLOSE MH 10007 P4:
TYLOSE delayed solubility grades have important characteristics which make them appropriate as thickeners in cleaner formulations: 
Easy incorporation in the formulation, solutions of good clarity, good compatibility with ionic surfactants and good storage stability.

TYLOSE burns easily and the fire can spread.
TYLOSE can be stored for a long time if stored in a closed container or in TYLOSE MH 10007 P4 original packaging, in a dry place at room temperature. 

For high viscosity types, slight loss of viscosity may occur after long-term storage (more than 1 year). 
TYLOSE absorbs water from humid air. 
The opened container must be resealed.

TYLOSE for Pet Litter:
Eco-friendly pet litters are becoming increasingly popular. 
They have advantages over conventional mineral based materials where ecological and health aspects are concerned. 

Produced from minerals and often transported over long distances, mineral based pet litters are ecologically disadvantageous. 
Moreover they are not biodegradable and not flushable. 
Mineral based pet litters can produce silica dust, which is suspected to cause health problems in pets, particularly if they have longterm exposure to TYLOSE MH 10007 P4 or have respiratory issues. 

Alternative eco-friendly base materials are available. 
Typical examples are granulated wood powder and agricultural refuse such as wheat husks and corncobs. 

An important requirement of pet litter is TYLOSE MH 10007 P4s ability to form clumps. 
Eco-friendly material usually does not have this property or TYLOSE MH 10007 P4 clumping ability varies according to the quality of the material. 

Reliable binding additives are therefore needed to improve the clumping properties of the base material. 
High viscosity grades of TYLOSE MH and TYLOSE MHS can successfully achieve this.

Oil and Gas Industry of TYLOSE MH 10007 P4:
TYLOSE is highly suitable in different oilfield applications.
Furthermore, TYLOSE is used in hydraulic fracturing processes and TYLOSE MH 10007 P4 is an effective fluid-loss additive in well cements. 

TYLOSE MH 10007 P4 is compatible with most additives such as biocides, antifoaming agents, oxygen scavengers, fluid loss control additives and retarders.
As a naturally derived polymer, TYLOSE MH 10007 P4 is easily biodegradable.

Transport of TYLOSE MH 10007 P4:

TYLOSE MH 10007 P4 Road And Rail Transport:
Not classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land".

TYLOSE MH 10007 P4 Marine Transport:
Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea.

TYLOSE MH 10007 P4 Air Transport:
Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air.

Storage, Safety Instructions of TYLOSE MH 10007 P4:
As with all organic powdered substances, cellulose ethers pose a dust explosion hazard. 
To avoid flammable dust-air mixtures, the risk of dust generation and accumulation must be minimized. 

Avoid fire sources such as open flames, hot surfaces, sparks, electrical disturbances. 
TYLOSE begins to decompose at around 200°C. 
The flash point is greater than 360°C. 

Storage stability of TYLOSE MH 10007 P4:
High compatibility with other raw materials such as surfactants.

Composition of TYLOSE MH 10007 P4:
Form: white powder
Etherification: etherification standard
Grain size: fine powder
Delayed solubility: not
Modification: average
Viscosity level (according to Höppler): 10,000 mPas

Properties of TYLOSE MH 10007 P4:
Solubility: Slightly soluble in water
Density: 1.1 - 1.5 g/cm3
Relative Vapour Density (air=1): N App
Vapour Pressure (20 °C): N App
Flash Point (°C): N App
Flammability Limits (%): N App

Autoignition Temperature (°C): >170
Melting Point/Range (°C): N App
Boiling Point/Range (°C): N App
pH: 6 - 8 (10 g/L aqu soln)
Viscosity: N App
Total VOC (g/Litre): N Av

Consistency development: fast 
Final consistency: moderate 
Sag resistance: moderate 
Water demand: moderate 
Water retention: moderate 
Influence on cement hydration: moderate 
Heat stability: moderate

Other TYLOSE Products:
TYLOSE E 707002      
TYLOSE MO 4000 P4     
TYLOSE H 100000 YP2     
TYLOSE H 100070 NP2      
TYLOSE HS 100000 YP2

TYLOSE H grades:
TYLOSE H 10 YG4      
TYLOSE H 15 YG4      
TYLOSE H 20 P2      
TYLOSE H 20 YG4      
TYLOSE H 200 NP2      
TYLOSE H 300 NG4      
TYLOSE H 300 P2      
TYLOSE H 300 YP2      
TYLOSE H 4000 NG4      
TYLOSE H 6000 YP2      
TYLOSE H 10000 NG4      
TYLOSE H 10000 P2      
TYLOSE H 15000 YP2      
TYLOSE H 30000 YP2      
TYLOSE H 60000 YP2      
TYLOSE H 100000 YP2      
TYLOSE H 200000 YP2      

TYLOSE HA grades:
TYLOSE HA 40 YP2      

TYLOSE HC grades:
TYLOSE HC 30000 YP2      

TYLOSE HS grades:
TYLOSE HS 250 YG4      
TYLOSE HS 6000 YP2      
TYLOSE HS 15000 YP2      
TYLOSE HS 30000 YP2      
TYLOSE HS 60000 YP2      
TYLOSE HS 100000 YP2      

TYLOSE HX grades:
TYLOSE HX 500 T      
TYLOSE HX 6000 YG4 Plus      

TYLOSE MB grades:
TYLOSE MB 15009 P2    
TYLOSE MB 60000 P2    

TYLOSE MH grades:
TYLOSE MH 50 G4     
TYLOSE MH 200 YP2     
TYLOSE MH 300 P2     
TYLOSE MH 2000 YP2    
TYLOSE MH 4000 KG4
TYLOSE MH 6000 YG8
TYLOSE MH 6000 YP4    
TYLOSE MH 6002 P4     
TYLOSE MH 10000 KG4    
TYLOSE MH 10007 P4    
TYLOSE MH 15000 YP4    
TYLOSE MH 15002 P6    
TYLOSE MH 15018 P4     
TYLOSE MH 20006 P4    
TYLOSE MH 20009 P2    
TYLOSE MH 30000 YG8    
TYLOSE MH 30000 YP4    
TYLOSE MH 30026 P4    
TYLOSE MH 60000 P6    
TYLOSE MH 60001 P4     
TYLOSE MH 60001 P6    
TYLOSE MH 60004 P6    
TYLOSE MH 60009 P4    
TYLOSE MH 60010 P4     
TYLOSE MH 100001 P6    
TYLOSE MHBS 60000 YP4     
TYLOSE MH 300003 P6    

TYLOSE MHE grades:
TYLOSE MHE 60000 YP4     

TYLOSE MHF grades:
TYLOSE MHF 10015 P4    
TYLOSE MHF 10016 P4    
TYLOSE MHF 20007 P4    
TYLOSE MHF 20010 P4    
TYLOSE MHF 60028 P6
TYLOSE MHF 150013 P6    

TYLOSE MHS grades:
TYLOSE MHS 10012 P6     
TYLOSE MHS 30024 P4     
TYLOSE MHS 30027 P6    
TYLOSE MHS 60000 YP4    
TYLOSE MHS 100005 P3    
TYLOSE MHS 100006 P3    
TYLOSE MHS 150003 P4     
TYLOSE MHS 150012 P4     
TYLOSE MHS 300000 P4    

Special grades:
TYLOSE CER 406001      
TYLOSE E 510024     
TYLOSE E 514016
TYLOSE EHH      
TYLOSE H 4070 NG4      
TYLOSE H 100070 NP2      
TYLOSE HC 50 NP2