Quick Search
CAS Number: 9004-62-0
EC Number: 618-387-5
TYLOSE MH 2000 YP2 is a water-soluble, non-ionic methyl hydroxyethyl cellulose powder with standard etherification.
TYLOSE MH 2000 YP2 provides increased biostability, low gloss appearance, good anti-spattering properties, and moderate wet scrub resistance.
This grade of methyl hydroxyethyl cellulose (MHEC), TYLOSE MH 2000 YP2, is ideal for use in cement paints, distempers, and lime-wash paints.
TYLOSE MH 2000 YP2 offers very high water retention, low gloss, low pigment compatibility, low pseudoplasticity, moderate thickening effect, and moderate wet scrub resistance.
TYLOSE MH 2000 YP2 exhibits good anti-spattering.
TYLOSE MH 2000 YP2 is used for paint applications like solid paints, powder paints, limewash paints, cement paints, distempers, and emulsion based plasters.
TYLOSE MH are water soluble, nonionic cellulose ethers, which are offered as free flowing powder or in granular form.
TYLOSE MH may contain further additives which for example control the dissolution behavior or the thickening power.
Uses of TYLOSE MH 2000 YP2:
Recommended uses of TYLOSE MH 2000 YP2:
Rheological Additive,
Special applications,
Coating material.
Applications of TYLOSE MH 2000 YP2:
Powder paints,
Lime paints,
Cement paints,
Water paints,
Emulsion plaster,
Joints,
Self-leveling floors.
Packaging, storage, safety instructions of TYLOSE MH 2000 YP2:
As with all organic powdered substances, cellulose ethers pose a dust explosion hazard.
To avoid flammable dust-air mixtures, the risk of dust formation and accumulation must be minimized.
Avoid fire sources such as open flames, hot surfaces, sparks, electrical disturbances.
TYLOSE begins to decompose at around 200˚C.
The flash point is greater than 360˚C.
Construction use of TYLOSE MH 2000 YP2:
Restrictions on use:
There is no information available on applications that are not advised
TYLOSE burns easily and the fire can spread.
TYLOSE can be stored for a long time if stored in a closed container or in TYLOSE MH 2000 YP2s original packaging, in a dry place at room temperature.
For high-viscosity types, slight loss of viscosity may occur after long-term storage (more than 1 year).
TYLOSE absorbs water from humid air.
The opened container must be resealed.
Properties of TYLOSE MH 2000 YP2:
Composition: Methylhydroxyethyl cellulose
Appearance: white granules
Etherification: standard etherification
Grain size: granules
Delayed solubility: yes
Biostability: yes
Viscosity level (Höppler): 10,000 mPas
Physical state: Solid
Appearance: Powder.
Colour: whitish
TYLOSE MH 2000 YP2 Odour: odourless
TYLOSE MH 2000 YP2 pH: 6 – 8 10g/l
Auto-ignition temperature: > 170 °C
TYLOSE MH 2000 YP2 Constitution: Methyl hydroxyethyl cellulose
TYLOSE MH 2000 YP2 Appearance: powder
Etherification: standard
TYLOSE MH 2000 YP2 Particle size: powder
Delayed solubility: yes
Level of viscosity: according to Höppler 2000 mPa•s
TYLOSE MH 2000 YP2 Vapour pressure: Vapour pressure: Not specifically applicable
Relative density: Relative vapour density at 20 °C: Not specifically applicable
TYLOSE MH 2000 YP2 Density: Density: 1.1 – 1.5 g/cm³ 20 °C
Solubility: Water: > 10 g/l @ 20°C
Log Pow: < 1
Explosive properties: Product is not explosive.
Dust may form explosive mixture in air.
Explosive limits: No data available
Minimum ignition energy: > 10 mJ
Fat solubility: No data available
Conbustion class: 5
Smoldering temperature: >450 °C
pmax: 10 bar
Dust explosion category: ST1
KSt: < 200 bar*m/s
Ignition temperature: > 400 °C
Specifications of TYLOSE MH 2000 YP2:
TYLOSE MH 2000 YP2 Moisture: ≤10%
NaCl content: ≤1.5%
Grain size: <500 µm: min. 90%
Grain size: <125µm: max. twenty%
Viscosity: 8,000 - 12,000 mPas
Brookfield RV, 20 µM, 1.9% 20 ° C, 20 ° GH
Biostability: yes
Gloss: low
Pigment Compatibility: low
Anti-spattering: good
Pseudoplasticity: low
Thickening effect: low
Wet scrub resistance: moderate
Water retention: low
Additional data about TYLOSE MH 2000 YP2:
Bulk density: approx. 400 g / l
Etherification (MS / DS): approx. 0.15 / ca. 1.70
Swelling time: approx. 3 min.
Final dissolving time: approx. 40 min.
Other TYLOSE Products:
TYLOSE E 707002
TYLOSE MO 4000 P4
TYLOSE H 100000 YP2
TYLOSE H 100070 NP2
TYLOSE HS 100000 YP2
TYLOSE H grades:
TYLOSE H 10 YG4
TYLOSE H 15 YG4
TYLOSE H 20 P2
TYLOSE H 20 YG4
TYLOSE H 200 NP2
TYLOSE H 300 NG4
TYLOSE H 300 P2
TYLOSE H 300 YP2
TYLOSE H 4000 NG4
TYLOSE H 6000 YP2
TYLOSE H 10000 NG4
TYLOSE H 10000 P2
TYLOSE H 15000 YP2
TYLOSE H 30000 YP2
TYLOSE H 60000 YP2
TYLOSE H 100000 YP2
TYLOSE H 200000 YP2
TYLOSE HA grades:
TYLOSE HA 40 YP2
TYLOSE HC grades:
TYLOSE HC 30000 YP2
TYLOSE HS grades:
TYLOSE HS 250 YG4
TYLOSE HS 6000 YP2
TYLOSE HS 15000 YP2
TYLOSE HS 30000 YP2
TYLOSE HS 60000 YP2
TYLOSE HS 100000 YP2
TYLOSE HX grades:
TYLOSE HX 500 T
TYLOSE HX 6000 YG4 Plus
TYLOSE MB grades:
TYLOSE MB 15009 P2
TYLOSE MB 60000 P2
TYLOSE MH grades:
TYLOSE MH 50 G4
TYLOSE MH 200 YP2
TYLOSE MH 300 P2
TYLOSE MH 2000 YP2
TYLOSE MH 4000 KG4
TYLOSE MH 6000 YG8
TYLOSE MH 6000 YP4
TYLOSE MH 6002 P4
TYLOSE MH 10000 KG4
TYLOSE MH 10007 P4
TYLOSE MH 15000 YP4
TYLOSE MH 15002 P6
TYLOSE MH 15018 P4
TYLOSE MH 20006 P4
TYLOSE MH 20009 P2
TYLOSE MH 30000 YG8
TYLOSE MH 30000 YP4
TYLOSE MH 30026 P4
TYLOSE MH 60000 P6
TYLOSE MH 60001 P4
TYLOSE MH 60001 P6
TYLOSE MH 60004 P6
TYLOSE MH 60009 P4
TYLOSE MH 60010 P4
TYLOSE MH 100001 P6
TYLOSE MHBS 60000 YP4
TYLOSE MH 300003 P6
TYLOSE MHE grades:
TYLOSE MHE 60000 YP4
TYLOSE MHF grades:
TYLOSE MHF 10015 P4
TYLOSE MHF 10016 P4
TYLOSE MHF 20007 P4
TYLOSE MHF 20010 P4
TYLOSE MHF 60028 P6
TYLOSE MHF 150013 P6
TYLOSE MHS grades:
TYLOSE MHS 10012 P6
TYLOSE MHS 30024 P4
TYLOSE MHS 30027 P6
TYLOSE MHS 60000 YP4
TYLOSE MHS 100005 P3
TYLOSE MHS 100006 P3
TYLOSE MHS 150003 P4
TYLOSE MHS 150012 P4
TYLOSE MHS 300000 P4
Special grades:
TYLOSE CER 406001
TYLOSE E 510024
TYLOSE E 514016
TYLOSE EHH
TYLOSE H 4070 NG4
TYLOSE H 100070 NP2
TYLOSE HC 50 NP2
