TYLOSE MH 30000 YP4

Tylose MH 30000 YP4 is used in emulsion-based tile adhesives.
Tylose MH 30000 YP4 exhibits good anti-spattering. 
Tylose MH 30000 YP4 is used for paint applications like solid paints, limewash paints, ready-mixed joint fillers, and spray applied jointing compounds.

CAS Number: 9004-62-0
EC Number: 618-387-5
INCI/Chemical Name: Hydroxy cellulose ether - Methyl hydroxyethyl cellulose (MHC)
General Molecular Formula: (C6H7O2(OH)x(OCH3)y(OCH2CH2OH)z)n
(Exact composition varies depending on the degree of substitution.)
Molecular Weight: Varies depending on the polymer chain length but typically ranges from 50,000 to 100,000 g/mol (or higher, depending on viscosity grade).

SYNONYMS:
Methyl hydroxyethyl cellulose, MHEC, Hydroxyethyl methyl cellulose, HEMC, Methylhydroxyethylcellulose (MHEC), Hydroxyethyl Methylcellulose (HEMC), Tylose MH 30000 YP4, Tylose MH 30000, Methyl Hydroxyethylcellulose 30000,

Tylose MH 30000 YP4 offers high water retention and thickening effect, low gloss, low pigment compatibility, low pseudoplasticity, and moderate wet scrub resistance. 
Tylose MH 30000 YP4 is water soluble, nonionic cellulose ethers, which are offered as free flowing powder or in granular form. 

Tylose MH 30000 YP4 may contain further additives which for example control the dissolution behavior or the thickening power.
Tylose MH 30000 YP4 is methyl hydroxyethyl cellulose. 
Tylose MH 30000 YP4 is a water soluble, non-ionic, methyl hydroxyethyl cellulose with standard etherification, recommended for cement based skim coats. 

Tylose MH 30000 YP4 ensures sufficient water retention and gives good adhesion strength.
Tylose MH 30000 YP4 is Methyl Hydroxyethyl Cellulose (MHEC), which is a cellulose ether rather than a discrete molecular compound with a fixed molecular formula. 

However, Tylose MH 30000 YP4's general molecular composition is based on cellulose (C6H10O5)n, with methyl (-CH3) and hydroxyethyl (-CH2CH2OH) substitutions.
Tylose MH 30000 YP4 is a water soluble, non-ionic, methyl hydroxyethyl cellulose with standard etherification.

USES and APPLICATIONS of TYLOSE MH 30000 YP4:
Building Materials: Tylose MH 30000 YP4 acts as a thickener, binder, water-retaining agent, and dispersing agent in products like cement-based renders, gypsum-based plasters, tile adhesives, joint compounds, and Exterior Insulation Finishing Systems (EIFS). 
Coatings: Tylose MH 30000 YP4 is used in emulsion paints, mineral-based paints, tinting systems, and paste-like systems to prevent sedimentation and allow even, spatter-free application. 

Special Applications: Tylose MH 30000 YP4 is employed in polymerization processes, pharmaceuticals, ceramics, cosmetics, and cleaning agents as a rheology modifier, emulsifier, and film-forming agent. 
Tylose MH 30000 YP4 acts as a rheology modifier. 

Tylose MH 30000 YP4 offers low gloss, low pigment compatibility, high thickening effect, high water retention, good anti-spattering, low pseudo-plasticity, and moderate wet scrub resistance. 
Tylose MH 30000 YP4 shows biostability. 

Tylose MH 30000 YP4 exhibits good anti-spattering. 
Tylose MH 30000 YP4 is used for paint applications like solid paints, limewash paints, ready-mixed joint fillers, and spray applied jointing compounds.

Tylose MH 30000 YP4 can be easily formed into a lump-free solution in cold water (pH 7) due to its surface treatment. 
The dissolution process can be accelerated if the pH is adjusted to approximately 8 to 9 after dispersing the cellulose adhesive in water.
Tylose MH 30000 YP4 is used in emulsion-based tile adhesives.

BENEFITS AND CHARACTERISTICS OF TYLOSE MH 30000 YP4:
*Water Retention: 
Tylose MH 30000 YP4 enhances water retention, crucial for the workability and curing of cement-based materials. 

*Thickening Effect: 
Tylose MH 30000 YP4 provides high thickening efficiency, improving the viscosity and stability of various formulations. 

*Anti-Spattering: 
Tylose MH 30000 YP4 exhibits good anti-spattering properties, ensuring smooth application in paint formulations. 

*Biostability: 
Tylose MH 30000 YP4 demonstrates increased biostability, contributing to the longevity and performance of end products. 
Tylose MH 30000 YP4's multifunctional properties make it a valuable additive across various industries, enhancing product performance and application characteristics.

APPROXIMATE MOLECULAR DATA OF TYLOSE MH 30000 YP4:
General Molecular Formula: 
(C6H7O2(OH)x(OCH3)y(OCH2CH2OH)z)n
(Exact composition varies depending on the degree of substitution.)

Molecular Weight: 
Varies depending on the polymer chain length but typically ranges from 50,000 to 100,000 g/mol (or higher, depending on viscosity grade).
Since Tylose MH 30000 YP4 is a polymer, its properties are defined by its degree of substitution (DS) and molar substitution (MS) rather than a single molecular weight. 

PHYSICAL and CHEMICAL PROPERTIES of TYLOSE MH 30000 YP4:
CAS Number: 9004-62-0
EC Number: 618-387-5
Appearance: White to off-white powder
Odor: Odorless or characteristic odor
pH Value: 6 - 8 (10 g/L solution)
Solubility: Soluble in water; insoluble in most organic solvents
Flammability: > 400°C (ignition temperature)

CAS Number: 9004-62-0
EC Number: 618-387-5
INCI/Chemical Name: Hydroxy cellulose ether - Methyl hydroxyethyl cellulose (MHC)
General Molecular Formula: (C6H7O2(OH)x(OCH3)y(OCH2CH2OH)z)n
(Exact composition varies depending on the degree of substitution.)
Molecular Weight: Varies depending on the polymer chain length but typically ranges 
from 50,000 to 100,000 g/mol (or higher, depending on viscosity grade).

FIRST AID MEASURES of TYLOSE MH 30000 YP4:
-Description of first-aid measures
*General advice:
Show this material safety data sheet to the doctor in attendance.
*If inhaled:
After inhalation: 
Fresh air.
*In case of skin contact: 
Take off immediately all contaminated clothing. 
Rinse skin with
water/ shower.
*In case of eye contact:
After eye contact: 
Rinse out with plenty of water. 
Call in ophthalmologist. 
Remove contact lenses.
*If swallowed:
After swallowing: 
Immediately make victim drink water (two glasses at most). 
Consult a physician.
-Indication of any immediate medical attention and special treatment needed.
No data available

ACCIDENTAL RELEASE MEASURES of TYLOSE MH 30000 YP4:
-Environmental precautions:
Do not let product enter drains.
-Methods and materials for containment and cleaning up:
Cover drains. 
Collect, bind, and pump off spills. 
Observe possible material restrictions. 
Take up dry. 
Dispose of properly. 
Clean up affected area.

FIRE FIGHTING MEASURES of TYLOSE MH 30000 YP4:
-Extinguishing media:
*Suitable extinguishing media:
Carbon dioxide (CO2) 
Foam 
Dry powder
*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.
-Further information:
Prevent fire extinguishing water from contaminating surface water or the ground water system.

EXPOSURE CONTROLS/PERSONAL PROTECTION of TYLOSE MH 30000 YP4:
-Control parameters:
--Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:
*Eye/face protection:
Use equipment for eye protection. 
Safety glasses
*Body Protection:
protective clothing
*Respiratory protection:
Recommended Filter type: Filter A 
-Control of environmental exposure:
Do not let product enter drains.

HANDLING and STORAGE of TYLOSE MH 30000 YP4:
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Tightly closed. 
Dry.

STABILITY and REACTIVITY of TYLOSE MH 30000 YP4:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature) .
-Possibility of hazardous reactions:
No data available