Quick Search
CAS NO : 9032-42-2
EC NO: 618-528-0
Tylose MH 60004 P6 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification.
Physical state : Solid
Appearance : Powder.
color : whitish.
Fragrance : Odorless.
Scent power: No data available
pH : 6 - 8 10g/l
Tylose MH 60004 P6 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification.Tylose MH 60004 P6 displays very fast consistency development, moderate sag resistance and water demand, very high water retention, and low influence on cement hydration. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement tile adhesives.
Tylose MH 60004 P6 Application properties
Tylose MH 60004 P6 is mainly recommended for cost effective cement based tile adhesives. Even at low dosages it ensures sufficient water retention and gives good adhesion strength.The slight modification improves the workability and the slip resistance signiflcantly and ensures sufficient open time.
Chemical Properties
soluble in cold water, flocculates at elevated temperatures
Chemical Properties
Tylose MH 60004 P6 is a white, yellowish-white or grayish-white powder or granules, hygroscopic after drying.
Tylose MH 60004 P6 Uses
Water retention aid, thickening agent, protective colloid, suspending agent, binder and stabilizer.
Pharmaceutical Applications
Tylose MH 60004 P6 is used as an excipient in a wide range of pharmaceutical products, including oral tablets and suspensions, and topical gel preparations. Tylose MH 60004 P6 has similar properties to methylcellulose, but the hydroxyethyl groups make it more readily soluble in water and solutions are more tolerant of salts and have a higher coagulation temperature.
Safety
Tylose MH 60004 P6 is used as an excipient in various oral and topical pharmaceutical preparations, and is generally regarded as an essentially nontoxic and nonirritant material.
storage
Tylose MH 60004 P6 is hygroscopic and should therefore be stored under dry conditions away from heat.
Regulatory Status
GRAS listed. Included in nonparenteral medicines licensed in Europe (oral suspensions, tablets, and topical preparations).
Tylose MH 60004 P6 is a non-ionic water-soluble polymer.
Tylose MH 60004 P6 , also known as Hydroxyethyl cellulose or hydroxyethyl ether, is a thickening and gelling agent that comes from cellulose which is used in cleaning solutions and in cosmetics. Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.
Tylose MH 60004 P6 , hydroxyethyl methylose (HEMC), non-cellulose tater from a series of highly reduced film. Having good water solubility, it is a powder. , having adsorption, gel and protective colloid, and having moisture etc. Protects.
Feature
• Water retention
• good machinability
• Good overall performance
• Very good open time
• Thermal stability improved
• Less delay in cement hydration
• Excellent slip resistance
Application
1.tile adhesive
Tylose MH 60004 P6 can greatly increase the water-holding capacity, prevent large moisture loss to the highly water-absorbent ceramic tile and substrate, so that there is enough water for the cement to harden, the adhesion strength is increased, and the slip resistance mortar is further improved;Perfect open time and adjustable time for workers to adjust incorrect ceramic placement errors;
Tylose MH 60004 P6 , no matter thickly bonded or thinly bonded, can develop good bonding strength, reduce the shrinkage rate, and will not cause the ceramic tile craziness and stress fall;
2. Cementitious mortar
Tylose MH 60004 P6 can increase the homogeneity of the mortar, which makes it easier to paint the mortar. This increases the working efficiency and increases the resistance to sagging.
3. Putty
Tylose MH 60004 P6 is excellent water holding feature extends the workable time of the paste, increases the working efficiency, prevents the formation of crusting and gives the paste high mechanical strength during the coagulation period.
Tylose MH 60004 P6 (CAS: 9032-42-2), also known as HEMC, is 2-Hydroxyethyl methyl cellulose white powder. The salt resistance of hydroxyethyl methyl cellulose is better than that of unmodified polymer, and the gel temperature of Hydroxyethyl methyl cellulose is also relatively high MC.
Application:
Flowable cement based mat mortar
1. Improve the uniformity, facilitate the application of plaster, and improve the ability to withstand vertical flow. Increase fluidity and pumpability to improve work efficiency.
2. High water retention helped the mortar to prolong its working time, increase working efficiency, and provide high mechanical strength during solidification.
3. Control air infiltration to remove microcracks in the coating and create an ideally smooth surface.
Liquid gypsum plaster and gypsum products
1. Increase smoothness, facilitate plaster application, and improve anti-vertical flow capacity to increase fluidity and pumpability. Thus, increase work efficiency.
2. High water retention, extended the working time of the mortar and provided high mechanical strength during solidification.
3. High quality surface coating is done by controlling the homogeneous consistency of the mortar.
stallion masonry mortar
1. Increase adhesion to the wall surface and increase water retention to increase the strength of the mortar.
2. Increase lubrication and plasticity to improve construction performance.
The revision plate fills the suture material
Excellent water retention, which can prolong the cooling time and improve working efficiency. Its high lubrication feature makes the application easier and hassle-free.
2. Improve the contraction and anti-cracking properties and improve the surface quality.
3. Provide smooth and uniform texture and make the bonding surface more sticky.
First of all, ceramic adhesive
1. Avoid mixing and agglomeration of dry mix materials, thus saving working time. It can improve construction performance and reduce costs, as implementation is faster and more effective.
2. Brick bonding efficiency is increased by extending the cooling time. It provides excellent adhesion effect.
Charges flow through the surface material
1. Provide viscosity that can be used as an anti-settling agent.
2. Increase fluidity and pumpability to improve the efficiency of flooring.
3. Check water retention to greatly reduce cracking and shrinkage.
Water-based paint and paint remover
By preventing solid rain, the storage life is extended. It has excellent compatibility with other components and high biostability.
2. Fast dissolution without lumps helps simplify mixing. The cold water dispersing model can make the product mixing faster and more convenient, and does not produce lumps.
3. Produce appropriate flow characteristics, including low spatter and good leveling, to ensure good surface finish and prevent paint sagging.
4. Increase the viscosity of water-based paint remover and organic solvent paint stripper so that the paint stripper does not flow from the workpiece surface.
The fibers are spread on shaped concrete slabs
1. Enhance the machinability of extrusion products with high bond strength and lubricity.
2. Improve wet strength and adhesion after plate extrusion.
Tylose MH 60004 P6 is a non-ionic cellulose ether made from natural high polymer cellulose. It is an odourless, tasteless and non-toxic white powder, which can be dissolved in cold water to form a transparent viscous solution. Tylose MH 60004 P6 can be used in different building materials: Tile adhesive, Cement mortar, Joint filler, Self-levelling compound, External wall insulation, Gypsum based plaster, Ceramic extrusion.
White or off-white powder.
Tylose MH 60004 P6 is practically inert in hot water, acetone, ethanol, ether and toluene. Water and some ethanol and water, alcohol and water, ethylene dichloride, etc.
Tylose MH 60004 P6 can be dissolved in organic organics such as proportion. The solution has a performance of surfactant, transition and behavior. Solubility in water is not affected by PH value. Not hot water, generally non-cold water in organic systems.
Tylose MH 60004 P6 can be removed from the surface, but not slowly condensed in cold water, but quickly dissolved by adjusting the PH to 8-10.
Application:
Water-based latex paint, construction and building materials, printing inks, oil drilling, etc. Tylose MH 60004 P6 is widely used in the fields.
Tylose MH 60004 P6 is non-ionic cellulose ether produced from natural polymer material through the processing of etherification reaction. Tylose MH 60004 P6 is a kind of odorless, tasteless, toxic
Tylose MH 60004 P6 is an off-white powder or granule. It dissolves in hot and cold water, forms a transparent viscous solution and is insoluble in common organic solvents. Cellulose ether can be used in any area where thickening, gelling, emulsification, stabilization and water retention and good workability are required.
Tylose MH 60004 P6 OF USE
Construction：Cement mortar, Concrete mix，Gypsum-based hand and Machine plasters
Painting：Latex paint, polymer emulsified，Thickening, water retention, retarding Interior paints Exterior paints Silicone resin-based paints,Jam mortars
Papermaking：Sizing agent，Thickener, waterstop
Cosmetics：Toothpaste, shampoo, Detergent， Thickener, stabilizer
Petroleum Oil：Widely used in drilling wells, completing fluids，Water retention, Thickening，Control of fluid loss
1. Tylose MH 60004 P6 is made from Highly pure cotton cellulose. After alkaline treatment and special etherification becomes Tylose MH 60004 P6.Tylose MH 60004 P6 does not contain any animal fats and other active ingredients.
2. The appearance of Tylose MH 60004 P6 is white particles or powder, odorless and tasteless. Tylose MH 60004 P6 is hygroscopic and can not dissolve in hot water, acetone. ethanol and toluene. After swelling in cold water into a colloidal solution, dissolving is not affected by PH value.Tylose MH 60004 P6 is similar to methyl cellulose, but with the increase of hydroxyethyl groups, Tylose MH 60004 P6 has more tolerance, more easily soluble in water and has a higher condensation temperature.
3. Hemc plays a role of thickening, water retaining, which is very suitable fr water based painting construction materials, ink and oil drilling
4. Good additive for powder materials. Used as gelling agent, water retaining agent of cent and gypsum.
Application:
1. Tylose MH 60004 P6 plays a role of thickening, water retaining, which is very suitable for water based painting,construction materials, ink and oil drilling.
2. Good additive for powder materials. Used as gelling agent, water retaining agent of cement,gypsum.
3. Used as additive for tooth paste, cosmetics and detergent.
Main Performance:
➢ Long open time
➢ High slip resistance
➢ High water retention
➢ Sufficient tensile adhesion strength
Tylose MH 60004 P6 products are the main additives used in many building materials. Tylose MH 60004 P6 Providing thin bed in ceramic applications and smooth application of the mortar in plaster machines operating with continuous mixing philosophy is only possible with Tylose MH 60004 P6 methyl cellulose products.
Tylose MH 60004 P6 methyl cellulose products provide control of the consistency and water retention properties of the building materials. At the same time, Tylose MH 60004 P6 increases the homogeneity and consistency of all mortar types.
Tylose MH 60004 P6, short for MC, is a type of long chain substituted cellulose in which 27% to 32% of the hydroxyl group is in the methoxy form. The degree of substitution affects the physical properties of methyl cellulose such as solubility. The average molecular weight of Tylose MH 60004 P6 is 10,000 to 220,000.
Tylose MH 60004 P6 is displayed as a white powder or fibrous material at room temperature and is non-toxic, non-irritating with its non-allergenic effect.Tylose MH 60004 P6 is apparent relative density is 0.35 to 0.55 (actual density is 1.26 to 1.30). By swelling in water, Tylose MH 60004 P6 becomes a translucent viscous colloidal solution that is litmus neutral, insoluble in ethanol, ether and chloroform, but soluble in glacial acetic acid.
Tylose MH 60004 P6 is tolerant to the effects of acid, alkali, microorganisms, heat and light, and is also unaffected by oil and grease, but will burn when Tylose MH 60004 P6 reaches the ignition point. Methyl cellulose is a product consisting of cellulose glucose by methylation of all or part of the three hydroxyls. General products contain a methoxy fraction between 26% and 33% and the degree of substitution is 1.7 to 2.2. The product with a degree of substitution of 1.3 to 2.6 is soluble in water, pyridine and acetic acid.
This product is widely used in architecture such as cement, mortar adhesive and muddy seam.Tylose MH 60004 P6 is also used in the cosmetic, pharmaceutical and food industries to make the film adhesive.
Tylose MH 60004 P6 can also be used as a textile sizing agent, synthetic resin dispersing agent, paint film former and thickener. The production method is: using pulp to produce alkaline Tylose MH 60004 P6 is widely applied in a variety of oral or topical formulations; it is also widely used in cosmetics and foods. After oral administration, Tylose MH 60004 P6 cannot be digested or absorbed to be a calorie-free material. Excessive Tylose MH 60004 P6 intake can temporarily increase bloating and even cause esophageal obstruction upon inadequate water intake. However, Tylose MH 60004 P6 has a laxative effect.
Tylose MH 60004 P6 is a hydrophilic colloid and high viscosity cellulose derivatives. Tylose MH 60004 P6 is non-toxic and caustic, hygroscopic and can expand into a colloidal suspension in cold water.
Tylose MH 60004 P6 is also insoluble in hot water, alcohol, ether, chloroform and saturated salt solution but soluble in glacial acetic acid and a mixture of equal amounts of alcohol and chloroform solution.
Tylose MH 60004 P6 can also be used as suitable adhesives for selecting low or medium viscosity grade plastics that work well in both powder and solution. Used to improve drug dissolution rate or disintegration rate; the overall concentration is 1% to 2%. For gels, thickening gels and creams: Tylose MH 60004 P6 is appropriate to choose the higher viscosity grade. Suspending agents and thickening agents, solutions can replace syrup; use a concentration up to 5% to thicken. For tablet coating: we can choose high modification and low viscosity product as film coating; Tylose MH 60004 P6 can also be used for the covering surrounding the outer nuclear layer for isolation. For disintegrants, Tylose MH 60004 P6 is generally used in a concentration of 2% to 10%. For the emulsifier, Tylose MH 60004 P6 is generally recommended to use a 1% to 5% concentration low viscosity grade. For eye drops, we must use a high viscosity grade. Tylose MH 60004 P6 powder is stable and somewhat hygroscopic; Tylose MH 60004 P6 should be placed in an airtight container and stored in a cool and dry place.
Tylose MH 60004 P6 one of the key ingredients in dry mix mortars due to Tylose MH 60004 P6’s ability to influence key dry mix mortars properties such as curing, workability, water retention, rheology and thixothropy.
Tylose MH 60004 P6 is a multi-functional pharmaceutical adjuvant which can be used as thickener, dispersant, emulsifier and film-forming agent. As film coating and binder, Tylose MH 60004 P6 can improve the dissolution rate of drugs. Tylose MH 60004 P6 can also be used as a suspension aid, host material in ophthalmic preparations and etc. Tylose MH 60004 P6 Used for stabilization of air spaces. Tylose MH 60004 P6 is used for consistency control.
Tylose MH 60004 P6 is used to increase the adhesion strength. Tylose MH 60004 P6 is used for adhering ceramics, constructing gas concrete or brick walls and application of external thermal insulation (sheathing) systems.
Tylose MH 60004 P6 guarantees ease of application, high efficiency and high strength. Tylose MH 60004 P6 is used for bonding ceramics, Tylose MH 60004 P6 is used in the construction of aerated concrete or brick walls and in the application of Tylose MH 60004 P6 exterior thermal insulation (Sheathing) systems.
Tylose MH 60004 P6; provides ease of application and Tylose MH 60004 P6 guarantees high efficiency and high strength. Tylose MH 60004 P6 should be easy to apply with a trowel.
Tylose MH 60004 P6 Ceramics should have a long set time, high Tylose MH 60004 P6 shear strength and sufficient adhesion strength.The product is widely used in the architectural industry as a mixing agent for cement, plaster and clay seams.
Tylose MH 60004 P6 can also be used as an adhesive film former in the cosmetic, pharmaceutical and food industries;
Tylose MH 60004 P6 can also be used as sizing agents, synthetic resin dispersing agents, dye film formers and thickeners for spinning, printing and dyeing Tylose MH 60004 P6 is a very stable material resistant to acids, alkalis, microorganisms and heating.
Tylose MH 60004 P6 can be expelled from the human body without any changes.
Tylose MH 60004 P6 is used as a synthetic resin dispersing agent, film-forming agent of paint, thickener, binder materials, textile sizing agent and film-forming agent in the pharmaceutical and food industries. Production methods use Pulp to prepare base fiber; then etherification reaction is performed to obtain methyl chloride. Pulp, according to different sources, cotton pulp, wood pulp, straw pulp, etc.
Tylose MH 60004 P6 can be classified as.
Tylose MH 60004 P6 is generally used in the pulp and cotton pulp (cotton linters) industry.
Tylose MH 60004 P6 is difficult for the cellulose in the pulp to react with methyl chloride; must first be turned into alkaline cellulose.
Tylose MH 60004 P6 is also used in injectable formulations.Therapeutically, Tylose MH 60004 P6 is used as a bulk laxative;
Tylose MH 60004 P6 has also been used to aid appetite control in obesity management, but there is little evidence to support its effectiveness.A poison intraperitoneally. Emits sharp smoke and irritating fumes when heated to decompose.
Tylose MH 60004 P6 is widely used in various oral and topical pharmaceutical formulations.
Tylose MH 60004 P6 is also widely used in cosmetics and food products and is generally considered a non-toxic, non-allergenic, and non-irritating material.Following oral consumption, Tylose MH 60004 P6 is not digested or absorbed and is therefore a non-caloric material. Ingestion of excessive amounts of Tylose MH 60004 P6 can temporarily increase bloating and gastrointestinal distension.In the normal individual, oral consumption of large amounts of Tylose MH 60004 P6 has a laxative effect and therefore medium or high viscosity grades are used as bulk laxatives. Esophageal obstruction may occur if methylcellulose is swallowed with insufficient fluid. Consumption of large amounts of Tylose MH 60004 P6 may also interfere with the normal absorption of some minerals. However, these and other adverse effects discussed above are mainly related to the use of Tylose MH 60004 P6 as a bulk laxative and are not significant factors when Tylose MH 60004 P6 is used as an excipient in oral preparations. Although Tylose MH 60004 P6 has been used for intra-articular and intramuscular injections, it is not widely used in parenteral products.
TYLOSE MH 60004 P6 is a modified Methylhydroxyethylcellulose for multi customization enhancer.
Tylose MH 60004 P6 is a water-soluble, non-ionic, used methyl hydroxyethyl cellulose powder with standard etherification.
Tylose MH 60004 P6 acts on very rapidity, medium sag water resistance, very high water retention and difficult hydration.
Such methyl hydroxyethyl celluloses (MHEC) are ideal for use.
Raw Material Categories
Additives ~ Water Retention Additives / Humidifiers ~ Cellulose Ethers
Additives ~ Thickeners / Rheology Modifiers ~ Cellulose Ethers
Additives ~ Stabilizers ~ Process Stability
Additives ~ Adhesion Enhancers
application features
Tylose MH 60004 P6 is mainly recommended for properly applied base tile materials.
It provides sufficient water retention even in low cost ves.
Light aid improves machinability and slip resistance and adequate open time.
Tylose MH 60004 P6 is a water-soluble, non-ionic, used methyl hydroxyethyl cellulose powder with standard etherification. It has an effect on very fast mobility, moderate sagging and water demand, very high water retention and hydration over time. Such methyl hydroxyethyl celluloses (MHEC) are ideal for use.
Methylhydroxyethylcellulose has been modified for the enhancer to be very specific
Tylose MH 60004 P6 Product Features
Texture / physical form: very fine powder
Solubility: soluble in water
Active crazy min. Commercial financial 92.5%
Humidity by pass: max. 6%
NaCl: max. 1.5%
particle size
<0.100 mm (140 mesh) min. 90%
<0.063 mm (230 mesh your request) min. 65%
Viscosity: 1.9% absolutely dry, 20°C, 20°GH
Quality, Höppler falling ball viscometer: 60000 mPas
Range, Brookfield RV, 20 rpm, sp. 6: 27,000 - 34,000 mPas
If long in dry sealed bags, Tylose has a shelf life.
methyl cellulose
Cellulose ethers are derivatives of natural celluloses and cotton. As the final target, targeted celluloses are used. Only shopping dough trainings inspected according to the sustainable management of the FSC (Forest Stewardship Council). Methyl cellulose (MC) can be viewed as a general term for mixed etherification cellulose ethers. Common to these cellulose ethers is methoxylation. Additionally, the conversation will be with ethylene oxide or propylene oxide.
Methylhydroxyethyl cellulose (MHEC)
methylhydroxyethyl cellulose
Tylose MHEC (methyl hydroxyethyl cellulose / Tylose MH grades) are water-soluble, nonionic nonionic ethers in oscillating powder or granular form. Tylos will be fine with MHEC controlling sampling or thickening.
IUPAC NAMES:
2-Hydroxyethyl methyl cellulose
CELLULOSE, 2-HYDROXYETHYL METHYL ETHER
Cellulose, 2-hydroxyethyl methyl ether
ethane-1,2-diol;(2S,3R,4R,5S,6R)-2-(hydroxymethyl)-6-[(2S,3R,4S,5S,6S)-4,5,6-trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxyoxane-3,4,5-triol;(2S,3S,4R,5S,6S)-2,3,4-trimethoxy-6-(methoxymethyl)-5-[(2R,3S,4R,5S,6S)-3,4,5-trimethoxy-6-(methoxymethyl)oxan-2-yl]oxyoxane
Hidroxyethyl Methyl Cellulose Ether
hydroxyethylmethylcellulose
Methyl 2-Hydroxyethyl Cellulose
Methyl 2-hydroxyethyl cellulose
methyl 2-hydroxyethyl cellulose
methyl 2-hydroxyethylcellulose
Methyl hydroxyethyl cellulose
Methyl Hydroxyethylcellulose
SYNONYMS:
METHYL HYDROXYETHYL CELLULOSE;METHYL 2-HYDROXYETHYL CELLULOSE;
Hymetellose;
Cellulose,2-hydroxyethylmethylether;
'Tylose'® MH 300;
Hydroxythyl Methyl Cellulose;
HydroxythylMethylCellulose(Hemc);
HEMC
2-Hydroxyethyl methyl cellulose
HYDROXYETHYL METHYL CELLULOSE
CELLULOSE METHYL HYDROXYETHYL ETHER
METHYL HYDROXYETHYL CELLULOSE
Cellulose,2-hydroxyethylmethylether
'Tylose'®
MH 300
Hydroxythyl Methyl Cellulose
HydroxythylMethylCellulose(Hemc)
HEMC
