Quick Search

PRODUCTS

TYLOSE MHB 3000 YP2

CAS Number: 9032-42-2

When the pH of the TYLOSE MHB 3000 P2 water solution is between 2 and 12, the viscosity is stable. 
If TYLOSE MHB 3000 P2 exceeds this range, acidic or alkaline oxidative degradation will occur and viscosity will decrease. 

TYLOSE MHB 3000 P2 has good workability and leveling properties: TYLOSE MHB 3000 P2 can be applied by brush, roller, spray and other construction methods.
Does not easily drip, sag or splash.
TYLOSE MHB 3000 P2 CAS Number is: 9032-42.

The viscosity of the TYLOSE MHB 3000 P2 aqueous solution decreases as the temperature increases, and the viscosity can be recovered when the temperature drops to the original temperature. 
TYLOSE MHB 3000 P2 If there is no high salt concentration, when the solution is heated to boiling point, no gel or precipitate is formed; ie TYLOSE MHB 3000 P2 is very resistant to temperature.

TYLOSE MHB 3000 P2 aqueous solution is a nonionic system and can be used for other water soluble polymers, surfactants, salts, etc. can be found together with. 
Therefore, TYLOSE MHB 3000 P2 is widely used in the daily chemical industry.
TYLOSE MHB 3000 P2 is very resistant to temperature.

TYLOSE MHB 3000 P2 (methyl hydroxyethyl cellulose/Tylose MH-grades) are water soluble, nonionic cellulose ethers, which are offered as free flowing powder or in granular form. 
TYLOSE MHB 3000 P2 may contain further additives which for example control the dissolution behavior or the thickening power.

Usage Areas of TYLOSE MHB 3000 P2:
TYLOSE MHB 3000 P2 is used as a binder in toothpaste, detergent and cosmetic products. 
TYLOSE MHB 3000 P2 in the latex paint composition prevents the gel from gelling, contributes to TYLOSE MHB 3000 P2 dispersion, stabilizes the latex paint and increases the viscosity of the component. 

TYLOSE MHB 3000 P2 has good compatibility with other materials such as pigments, auxiliary substances, fillers and salts in TYLOSE MHB 3000 P2 components.
Coatings thickened with TYLOSE MHB 3000 P2 have good rheology at various cutting speeds and are pseudoplastic.

Machinability and leveling properties of TYLOSE MHB 3000 P2 are good: Brush, roller, spray and can be applied with other construction methods.
TYLOSE MHB 3000 P2 does not easily drip, sag or bounce.

TYLOSE MHB 3000 P2 Used in paint removers.
TYLOSE MHB 3000 P2 Used as chafing fuel thickener.

TYLOSE MHB 3000 P2 is used as a binder, thickener, stabilizer and dispersant in toothpaste, detergent and cosmetic products.
TYLOSE MHB 3000 P2 Provides easy application with TYLOSE MHB 3000 P2 shear strength and binding effect in products with its feature of holding water in its structure.

High viscosity TYLOSE MHB 3000 P2 is mainly used as an adhesive for finishing and finishing fluids in oil drilling. 
Low viscosity TYLOSE MHB 3000 P2 is used as a fluid loss additive. 

Among the various solutions required for drilling, finishing, cementing and crushing, TYLOSE MHB 3000 P2 provides good fluidity and stability to the mud.
TYLOSE MHB 3000 P2 is used as binder, thickener, stabilizer and dispersant in toothpaste, detergent and cosmetic products.

TYLOSE MHB 3000 P2 provides easy application with its shear strength and binding effect in TYLOSE MHB 3000 P2 with its water retention feature.
TYLOSE MHB 3000 P2 helps to create movies.

Features of TYLOSE MHB 3000 P2:
TYLOSE MHB 3000 P2 has thickening, bonding, dispersion, film formation and suspension properties. 
When the pH of the TYLOSE MHB 3000 P2 water solution is between 2 and 12, the viscosity is stable. 

If TYLOSE MHB 3000 P2 exceeds this range, acidic or alkaline oxidative degradation occurs and viscosity decreases.
The viscosity of the TYLOSE MHB 3000 P2 aqueous solution decreases as the temperature increases, and viscosity can be recovered when the temperature drops to the original temperature. 
TYLOSE MHB 3000 P2 If there is no high salt concentration, no gel or precipitate forms when the solution is heated to the boiling point; so TYLOSE MHB 3000 P2 is very resistant to temperature.
 
TYLOSE MHB 3000 P2 aqueous solution is a nonionic system and can be used in other water-soluble polymers, surfactants, salts, etc. can be found with. 
For this reason, TYLOSE MHB 3000 P2 is widely used in the daily chemical industry.

TYLOSE MHB 3000 P2 Has the feature of thickening. 
TYLOSE MHB 3000 P2 has the adhesive feature. 

TYLOSE MHB 3000 P2 has the ability to form dispersion. 
TYLOSE MHB 3000 P2 has film formation and suspension properties.

Packaging, Storage and Safety instructions of TYLOSE MHB 3000 P2:
Safety instructions Like all fine-particle organic substances, cellulose ethers constitute a dust explosion hazard. 
Dust formation and deposits must be kept to a minimum so that no ignitable dust/air mixtures can form. 
Ignition sources such as naked flames, hot surfaces, sparks and static electricity should be avoided.

TYLOSE MHB 3000 P2 starts to decompose at about 200°C. 
TYLOSE MHB 3000 P2s ignition temperature is >360°C. 

TYLOSE MHB 3000 P2 burns easily and the fire may spread. 
When stored in closed containers, or in TYLOSE MHB 3000 P2 original packaging in a dry place at room temperature, Tylose can be kept for a long time. 

In the case of high viscosity grades, a slow loss of viscosity can be measured after lengthy storage (>1 year). 
TYLOSE MHB 3000 P2 absorbs water from moist air. 

Once opened, TYLOSE MHB 3000 P2 container must be resealed and kept tightly closed. 
20 kg Valved multi-layer paper sack with polyethylene interleaf.

Descriptions of TYLOSE MHB 3000 P2:
Standard Shelf Life: 1080 days
DFAR Applicable: No
Revision Level Applicable: No
Proprietary Part: No
Hazardous: No

Properties of TYLOSE MHB 3000 P2:
Constitution: Methyl hydroxyethyl cellulose
Appearance: white powder
Delayed solubility: no
Etherification: high etherification
Modification: -
Particle size: powder
Level of  viscosity: 3000 mPas
Product specification
Product specificationMoisture: ≤ 7 %
Content of NaCl: ≤ 1.5 %
Particle size: <180µm: min. 90 %
Particle size: <100µm: min. 25 %
Viscosity: 3300 - 4500 mPas
Additional data

Active substance: ≥ 91.5 %
Bulk density: ca. 400 g/l
Etherification (MS/DS): ca. 0.15 / ca. 1.90
Particle size: <63 µm: ca. 20%
Recommended fields of application
Decorative renders, mineral based Tile adhesives, standard Trowelling compounds, cement based Grouts, cement based.
Application performance
Consistency development: slow
Water retention: low
Final consistency: low
Influence on cement hydration: very low
Sag resistance: low
Heat stability: standard
Water demand: very low

Other TYLOSE Products:
TYLOSE E 707002      
TYLOSE MO 4000 P4     
TYLOSE H 100000 YP2     
TYLOSE H 100070 NP2      
TYLOSE HS 100000 YP2

TYLOSE H grades:
TYLOSE H 10 YG4      
TYLOSE H 15 YG4      
TYLOSE H 20 P2      
TYLOSE H 20 YG4      
TYLOSE H 200 NP2      
TYLOSE H 300 NG4      
TYLOSE H 300 P2      
TYLOSE H 300 YP2      
TYLOSE H 4000 NG4      
TYLOSE H 6000 YP2      
TYLOSE H 10000 NG4      
TYLOSE H 10000 P2      
TYLOSE H 15000 YP2      
TYLOSE H 30000 YP2      
TYLOSE H 60000 YP2      
TYLOSE H 100000 YP2      
TYLOSE H 200000 YP2      

TYLOSE HA grades:
TYLOSE HA 40 YP2      

TYLOSE HC grades:
TYLOSE HC 30000 YP2      

TYLOSE HS grades:
TYLOSE HS 250 YG4      
TYLOSE HS 6000 YP2      
TYLOSE HS 15000 YP2      
TYLOSE HS 30000 YP2      
TYLOSE HS 60000 YP2      
TYLOSE HS 100000 YP2      

TYLOSE HX grades:
TYLOSE HX 500 T      
TYLOSE HX 6000 YG4 Plus      

TYLOSE MB grades:
TYLOSE MB 15009 P2    
TYLOSE MB 60000 P2    

TYLOSE MH grades:
TYLOSE MH 50 G4     
TYLOSE MH 200 YP2     
TYLOSE MH 300 P2     
TYLOSE MH 2000 YP2    
TYLOSE MH 4000 KG4
TYLOSE MH 6000 YG8
TYLOSE MH 6000 YP4    
TYLOSE MH 6002 P4     
TYLOSE MH 10000 KG4    
TYLOSE MH 10007 P4    
TYLOSE MH 15000 YP4    
TYLOSE MH 15002 P6    
TYLOSE MH 15018 P4     
TYLOSE MH 20006 P4    
TYLOSE MH 20009 P2    
TYLOSE MH 30000 YG8    
TYLOSE MH 30000 YP4    
TYLOSE MH 30026 P4    
TYLOSE MH 60000 P6    
TYLOSE MH 60001 P4     
TYLOSE MH 60001 P6    
TYLOSE MH 60004 P6    
TYLOSE MH 60009 P4    
TYLOSE MH 60010 P4     
TYLOSE MH 100001 P6    
TYLOSE MHBS 60000 YP4     
TYLOSE MH 300003 P6    

TYLOSE MHE grades:
TYLOSE MHE 60000 YP4     

TYLOSE MHF grades:
TYLOSE MHF 10015 P4    
TYLOSE MHF 10016 P4    
TYLOSE MHF 20007 P4    
TYLOSE MHF 20010 P4    
TYLOSE MHF 60028 P6
TYLOSE MHF 150013 P6    

TYLOSE MHS grades:
TYLOSE MHS 10012 P6     
TYLOSE MHS 30024 P4     
TYLOSE MHS 30027 P6    
TYLOSE MHS 60000 YP4    
TYLOSE MHS 100005 P3    
TYLOSE MHS 100006 P3    
TYLOSE MHS 150003 P4     
TYLOSE MHS 150012 P4     
TYLOSE MHS 300000 P4    

Special grades:
TYLOSE CER 406001      
TYLOSE E 510024     
TYLOSE E 514016
TYLOSE EHH      
TYLOSE H 4070 NG4      
TYLOSE H 100070 NP2      
TYLOSE HC 50 NP2
 

  • Share !
E-NEWSLETTER