Quick Search



TYLOSE MHS 30027 P6 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. 
TYLOSE MHS 30027 P6 displays very fast consistency development, moderate sag resistance and water demand, high water retention and heat stability, and low influence on cement hydration. 

TYLOSE MHS 30027 P6 is ideal for use in cement renders and EIFSs.
TYLOSE MHS 30027 P6 is a medium viscosity, modified methyl hydroxyethyl cellulose.

Uses of TYLOSE MHS 30027 P6:

Recommended Use of TYLOSE MHS 30027 P6:    
Rheological Additive,
Special applications,
Coating material,
Additive for mortar.

Application Properties of TYLOSE MHS 30027 P6:
TYLOSE MHS 30027 P6 is mainly recommended for cementitious base renders. 
TYLOSE MHS 30027 P6 ensures sufficient water retention and gives good adhesion strength. 

The special modification provides an easy and non-sticky workability.
The retarding effect on the setting time of the cement is minimised.

First Aid of TYLOSE MHS 30027 P6:

First-aid measures after inhalation: 
Remove person to fresh air and keep comfortable for breathing. Call a doctor.

First-aid measures after skin contact: 
Wash skin with plenty of water.

First-aid measures after eye contact: 
Rinse immediately with plenty of water, also under the eyelids. Consult an ophthalmologist if irritation persists.

First-aid measures after ingestion: 
Rinse mouth. 
If symptoms persist, call a physician

Symptoms/effects after skin contact: 
May cause sensitisation of susceptible persons by skin contact.

Symptoms/effects after eye contact: 
May cause eye irritation.

Precautions for safe handling: 
Ensure good ventilation of the work station. 
Wear personal protective equipment. 
Avoid dust formation. 
Dust may form explosive mixture in air. 
Keep away from sources of ignition - No smoking.

Hygiene measures: 
Do not eat, drink or smoke when using this product. 
Always wash hands after handling the product.

Storage conditions: 
Material is hygroscopic. 
Protect from atmospheric moisture and water.

Information on mixed storage: 
No special storage requirements.

Packaging, Storage and Safety Instructions of TYLOSE MHS 30027 P6:
As with all organic powdered substances, cellulose ethers pose a dust explosion hazard. 
To avoid flammable dust-air mixtures, the risk of dust generation and accumulation must be minimized. 

Avoid fire sources such as open flames, hot surfaces, sparks, electrical disturbances. 
TYLOSE begins to decompose at around 200 ° C. 

The flash point is greater than 360 ° C. 
TYLOSE burns easily and the fire may spread.

TYLOSE can be stored for a long time if kept in a closed container or in TYLOSE MHS 30027 P6 original packaging, in a dry place at room temperature. 
For high-viscosity types, slight loss of viscosity may occur after long-term storage (more than 1 year). 

TYLOSE absorbs water from humid air. 
The opened container must be resealed.

Properties of TYLOSE MHS 30027 P6:
Physical state: Solid
Appearance: Powder.
Colour: whitish
Odour: odourless
Odour threshold: No data available
pH: 6 – 8 10g/l
Relative evaporation rate (butylacetate=1): Not specifically applicable
Melting point / Freezing point: Melting point: Not specifically applicable
Freezing point: Not specifically applicable
Boiling point: Not specifically applicable

Flash point: Not specifically applicable
Auto-ignition temperature: > 170 °C
Flammability (solid, gas): No data available
Vapour pressure: Vapour pressure: Not specifically applicable
Vapour pressure at 50 °C: Not specifically applicable
Relative density: Relative vapour density at 20 °C: Not specifically applicable
Density: Density: 1.1 – 1.5 g/cm³ 20 °C
Relative density: Not specifically applicable
Solubility: Water: > 10 g/l @ 20°C
Log Pow: < 0

Viscosity, kinematic: Not specifically applicable
Viscosity, dynamic: Not specifically applicable
Explosive properties: Product is not explosive. Dust may form explosive mixture in air.
Explosive limits: No data available
Minimum ignition energy: > 10 mJ
Fat solubility: No data available
Conbustion class: 5
Smoldering temperature: >450 °C
pmax: 10 bar
Dust explosion category: ST1
KSt: < 200 bar*m/s
Ignition temperature: > 400 °C

Descriptions of TYLOSE MHS 30027 P6:
Product form: Mixture
Product name: TYLOSE MHS 30027 P6
Product code: MHEC_M

Other TYLOSE Products:
TYLOSE E 707002      
TYLOSE MO 4000 P4     
TYLOSE H 100000 YP2     
TYLOSE H 100070 NP2      
TYLOSE HS 100000 YP2

TYLOSE H grades:
TYLOSE H 10 YG4      
TYLOSE H 15 YG4      
TYLOSE H 20 P2      
TYLOSE H 20 YG4      
TYLOSE H 200 NP2      
TYLOSE H 300 NG4      
TYLOSE H 300 P2      
TYLOSE H 300 YP2      
TYLOSE H 4000 NG4      
TYLOSE H 6000 YP2      
TYLOSE H 10000 NG4      
TYLOSE H 10000 P2      
TYLOSE H 15000 YP2      
TYLOSE H 30000 YP2      
TYLOSE H 60000 YP2      
TYLOSE H 100000 YP2      
TYLOSE H 200000 YP2      

TYLOSE HA grades:
TYLOSE HA 40 YP2      

TYLOSE HC grades:
TYLOSE HC 30000 YP2      

TYLOSE HS grades:
TYLOSE HS 250 YG4      
TYLOSE HS 6000 YP2      
TYLOSE HS 15000 YP2      
TYLOSE HS 30000 YP2      
TYLOSE HS 60000 YP2      
TYLOSE HS 100000 YP2      

TYLOSE HX grades:
TYLOSE HX 500 T      
TYLOSE HX 6000 YG4 Plus      

TYLOSE MB grades:
TYLOSE MB 15009 P2    
TYLOSE MB 60000 P2    

TYLOSE MH grades:
TYLOSE MH 50 G4     
TYLOSE MH 200 YP2     
TYLOSE MH 300 P2     
TYLOSE MH 2000 YP2    
TYLOSE MH 6000 YP4    
TYLOSE MH 6002 P4     
TYLOSE MH 10000 KG4    
TYLOSE MH 10007 P4    
TYLOSE MH 15000 YP4    
TYLOSE MH 15002 P6    
TYLOSE MH 15018 P4     
TYLOSE MH 20006 P4    
TYLOSE MH 20009 P2    
TYLOSE MH 30000 YG8    
TYLOSE MH 30000 YP4    
TYLOSE MH 30026 P4    
TYLOSE MH 60000 P6    
TYLOSE MH 60001 P4     
TYLOSE MH 60001 P6    
TYLOSE MH 60004 P6    
TYLOSE MH 60009 P4    
TYLOSE MH 60010 P4     
TYLOSE MH 100001 P6    
TYLOSE MHBS 60000 YP4     
TYLOSE MH 300003 P6    

TYLOSE MHE grades:
TYLOSE MHE 60000 YP4     

TYLOSE MHF grades:
TYLOSE MHF 10015 P4    
TYLOSE MHF 10016 P4    
TYLOSE MHF 20007 P4    
TYLOSE MHF 20010 P4    
TYLOSE MHF 150013 P6    

TYLOSE MHS grades:
TYLOSE MHS 10012 P6     
TYLOSE MHS 30024 P4     
TYLOSE MHS 30027 P6    
TYLOSE MHS 60000 YP4    
TYLOSE MHS 100005 P3    
TYLOSE MHS 100006 P3    
TYLOSE MHS 150003 P4     
TYLOSE MHS 150012 P4     
TYLOSE MHS 300000 P4    

Special grades:
TYLOSE CER 406001      
TYLOSE E 510024     
TYLOSE E 514016
TYLOSE H 4070 NG4      
TYLOSE H 100070 NP2      

  • Share !