Quick Search
TYLOVIS EP 28
CAS: 9003-11-6
pH : 6–8 10 g/l
Viscosity, dynamic : 900 – 1500 mPa·s at 70 °C
Density: 1.07 g/cm³ at 60 °C
Boiling point : > 360 °C
Flash point : > 250 °C
Market: Construction-Concrete/Mortar
Application: Cement Stucco/Plaster/Foamcoat, Concrete Repair, Concrete/Ready Mix/Admixtures
Product Type: Additives
Product Category: Surfactants, Wetting Agents
Composition: Polymerization product of ethylene oxide and propylene oxide
Tylovis EP 28 is a slightly air-entraining dispersing and wetting surfactant for cement, lime and gypsum based plasters, renders, mortars and trowelling compounds.
Tylovis EP 28 also has a some slight air-entraining property.
Tylovis EP 28 improves workability, smoothness, plasticity and trowelling as well as levelling behaviour of mortars and plasters.
Fine particles of inorganic binders and pigments are much better dispersed throughout mixtures by addition of Tylovis EP 28.
Tylovis EP 28 is highly recommended for gypsum based plasters as it reduces the stickiness of the first levelling and extends working time especially during the final stage.
Tylovis EP 28 is compatible with Tylose MC and HEC grades as well as anionic and non-ionic surfactants.
The recommended concentration should be 0.01 – 0.05 % by weight, calculated on the dry mixed mortar.
Tylovis EP 28 is a dispersing and wetting surfactant for cement, lime and gypsum based plasters, renders, mortars and troweling compounds.
Tylovis EP 28 also has a some slight air-entraining properties.
Tylovis EP 28 improves workability, smoothness, plasticity and troweling as well as leveling behaviour of mortars and plasters.
Fine particles of inorganic binders and pigments are much better dispersed throughout mixtures by addition of Tylovis EP 28.
Tylovis EP 28 is highly recommended for gypsum based plasters as it reduces the stickiness of the first leveling and extends working time especially during the final stage.
Tylovis EP 28 is polymerization product of propylene oxide and ethylene oxide.
Tylovis EP 28 acts as a slightly air-entraining dispersing and wetting surfactant for cement, lime, gypsum based plasters, renders, mortars as well as trowelling compounds.
Tylovis EP 28 improves the workability, smoothness, plasticity, trowelling resp. leveling behavior of mortars and plasters.
Fine particles of inorganic binders and pigments are quite better dispersed throughout mixtures by addition of Tylovis EP 28.
Tylovis EP 28 is highly recommended for gypsum based plasters.
Tylovis EP 28 reduces the stickiness of the first levelling and extends working time especially during the final stage.
Tylovis EP 28 possesses very good water hardness.
Tylovis EP 28 is compatible with anionic as well as non-ionic surfactants, Tylose MC and HEC grades.
Application as an additive in building materials:
Tylovis EP 28 is a slightly air-entraining dispersant and wetting agent for cement, lime and gypsum based mortars, plasters and putties.
Tylovis EP 28 improves the workability, plasticity and surface smoothness of plasters and other mortars.
The addition of Tylovis EP 28 ensures better dispersion of fine particles of inorganic binders and pigments during the entire mixing process.
Tylovis EP 28 is particularly recommended for use in gypsum plasters, reducing stiffness.
The additive prolongs the processing time, especially at the last stage.
Tylovis EP 28 is compatible with all anionic and neonic surfactants, with methylcelluloses and hydroxyethylcelluloses of the Tylose brand.
Recommended use : Rheological Additive
Chemical for use in construction
Coating material
Special applications
Storage
Tylovis EP 28 can be stored for a very long time in closed containers or in its original packaging in a dry place at room temperature.
SYNONYMS:
Bloat Guard
Oxyethylene Oxypropylene Polymer
Oxypropylene Polymer, Oxyethylene
Poloxalene
Poloxalene 2930
Polymer, Oxyethylene Oxypropylene
Polyoxyethylene Polyoxypropylene Polyoxyethylene Polymer
Proxanol
SK and F 18667
SK and F-18667
SK and F18667
Tergitol
Therabloat
