WANOL C2010

WANOL C2010 is a high-quality polyether polyol based on propanediol chemistry, specifically engineered for advanced polyurethane applications that require enhanced flexibility and improved elongation performance.
WANOL C2010 is typically utilized in elastomer, adhesive, sealant, and coating systems where a balanced combination of elasticity, durability, and processing stability is essential.
WANOL C2010's contribution to elasticity, toughness, and environmental resistance makes it particularly suitable for applications where dynamic load performance and dimensional stability are critical.

CAS Number: 25322-69-4
EC Number: 500-039-8
Molecular Formula: HO–(C3H6O)n–H

Synonyms: Hydroxyl-terminated polypropylene glycol, Polyether polyol 1000, Polypropylene oxide glycol 1000, PPG diol 1000, Difunctional polyether polyol (1000 MW), HO–(C3H6O)n–H (polypropylene glycol type, ~1000 MW), Polypropylene glycol 1000, PPG-1000, Poly(propylene oxide) diol 1000, Polyoxypropylene glycol 1000, PPO diol 1000, Polyether diol (MW 1000), Polypropylene oxide polyol 1000, Polyalkylene glycol 1000, Propylene oxide polymer diol

WANOL C2010 is a high-quality polyether polyol based on propanediol chemistry, specifically engineered for advanced polyurethane applications that require enhanced flexibility and improved elongation performance.
WANOL C2010's carefully controlled molecular architecture and hydroxyl functionality allow formulators to fine-tune crosslink density, hardness, and elasticity in the final polyurethane network.
Compared to lower molecular weight grades, WANOL C2010 typically contributes to softer, more resilient elastomer systems while maintaining good mechanical integrity.

WANOL C2010 demonstrates excellent compatibility with a broad range of isocyanates and commonly used polyurethane additives, supporting stable processing and predictable curing behavior.
WANOL C2010's balanced viscosity enables efficient mixing, pumping, and casting operations in both batch and continuous production systems.
Polyurethanes formulated with WANOL C2010 often exhibit enhanced flexibility at low temperatures, improved impact resistance, and reliable long-term durability under mechanical stress.

WANOL C2010 is widely used in CASE applications, including industrial adhesives, joint sealants, protective coatings, and cast elastomer components such as rollers, bushings, and flooring systems.
WANOL C2010's contribution to elasticity, toughness, and environmental resistance makes it particularly suitable for applications where dynamic load performance and dimensional stability are critical.

WANOL C2010 is a propanediol based polyether polyol.
WANOL C2010 is suitable to produce PU elastomers, especially for CASE and many other applications.
The foams used WANOL C2010 produced thus have better physical properties.

WANOL C2010 is a propanediol-based polyether polyol designed for use in polyurethane formulations requiring enhanced flexibility and controlled mechanical performance.
WANOL C2010 is typically utilized in elastomer, adhesive, sealant, and coating systems where a balanced combination of elasticity, durability, and processing stability is essential.
Due to its tailored molecular weight and hydroxyl functionality, WANOL C2010 enables efficient reaction with isocyanates, resulting in polyurethane materials with improved resilience and dimensional stability.

WANOL C2010 is particularly suitable for CASE applications and cast polyurethane systems where consistent curing behavior and long-term performance are required.
WANOL C2010's stable viscosity profile supports easy handling, pumping, and mixing in industrial production environments.
Polyurethane systems formulated with WANOL C2010 generally exhibit good abrasion resistance, mechanical strength, and environmental durability, making it appropriate for demanding industrial and construction applications.

Uses of WANOL C2010:
WANOL C2010 is primarily used as a reactive polyether polyol component in polyurethane production.
WANOL C2010 is widely applied in the manufacture of polyurethane elastomers where enhanced flexibility, elongation, and resilience are required. 
WANOL C2010 is suitable for CASE applications including coatings, adhesives, sealants, and elastomers, particularly in industrial and construction formulations.

In adhesive systems, WANOL C2010 contributes to improved flexibility and impact resistance while maintaining strong bonding performance on substrates such as metal, concrete, wood, and plastics.
In sealant applications, WANOL C2010 enhances movement capability and long-term elasticity, supporting joint durability under thermal and mechanical stress.

For coating systems, WANOL C2010 helps achieve a balanced hardness–flexibility profile while improving resistance to abrasion and environmental exposure.
WANOL C2010 is also used in cast polyurethane components such as industrial rollers, flooring materials, bushings, and molded elastomer parts where consistent curing, mechanical reliability, and dimensional stability are essential.

Advantages of WANOL C2010:
WANOL C2010 provides enhanced flexibility and elongation performance in polyurethane systems, making it particularly suitable for applications requiring resilient and impact-resistant materials.
WANOL C2010's controlled hydroxyl functionality enables precise adjustment of crosslink density, allowing formulators to balance softness, toughness, and mechanical strength in the final product.

WANOL C2010 offers excellent compatibility with a wide range of isocyanates and common polyurethane additives, supporting stable processing and predictable curing behavior.
WANOL C2010's optimized viscosity facilitates efficient mixing, pumping, and casting operations in industrial production environments.

Polyurethane systems formulated with WANOL C2010 typically demonstrate improved low-temperature flexibility, good abrasion resistance, and reliable long-term durability under dynamic mechanical stress.
Additionally, WANOL C2010 contributes to enhanced dimensional stability and environmental resistance, making it suitable for demanding industrial, construction, and elastomer applications.

Stability and Reactivity of WANOL C2010:

Chemical stability:
WANOL C2010 is stable under recommended storage and handling conditions when stored in tightly closed containers and protected from moisture and contamination.

Reactivity:
Reacts exothermically with isocyanates to form polyurethane polymers.
May react slowly with strong oxidizing agents under uncontrolled conditions.

Conditions to avoid:
Excessive heat.
Open flames.

Moisture ingress.
Prolonged exposure to air.
Uncontrolled mixing with reactive components.

Incompatible materials:
Strong oxidizing agents.
Strong acids.

Strong bases.
Reactive isocyanates in uncontrolled systems.

Hazardous decomposition products:
Thermal decomposition or combustion may generate carbon oxides (CO, CO₂).
Irritating organic vapors.

Handling and Storage of WANOL C2010:

Handling:
Avoid contact with skin and eyes.
Avoid inhalation of vapors or mists, especially at elevated processing temperatures.

Use adequate ventilation.
Follow good industrial hygiene practices.
Do not eat, drink, or smoke while handling.

Storage:
Store in a cool, dry, well-ventilated area away from heat sources and direct sunlight.

Storage conditions:
Keep containers tightly sealed to prevent moisture absorption and contamination.
Protect from freezing and excessive heat.

Shelf life:
Stable when stored properly in original, unopened containers under recommended conditions.

First Aid Measures of WANOL C2010:

Inhalation:
Move the affected person to fresh air and keep at rest.
Seek medical attention if irritation or respiratory symptoms persist.

Skin contact:
Remove contaminated clothing.
Wash affected area thoroughly with soap and water.
Seek medical advice if irritation develops.

Eye contact:
Rinse cautiously with plenty of water for at least 15 minutes.
Remove contact lenses if present and easy to do.
Seek medical attention if irritation persists.

Ingestion:
Rinse mouth with water.
Do not induce vomiting unless directed by medical personnel.
Seek medical advice if discomfort occurs.

Firefighting Measures of WANOL C2010:

Suitable extinguishing media:
Water spray.
Foam.

Dry chemical powder.
Carbon dioxide (CO₂).

Specific hazards:
Combustion may produce carbon oxides.
Other irritating or toxic fumes may be released.

Protective equipment for firefighters:
Wear self-contained breathing apparatus.
Full protective clothing.

Firefighting instructions:
Cool exposed containers with water spray to prevent pressure build-up.
Avoid inhalation of combustion gases.

Accidental Release Measures of WANOL C2010:

Personal precautions:
Ensure adequate ventilation.
Avoid contact with skin and eyes.
Wear appropriate protective equipment.

Environmental precautions:
Prevent entry into drains, surface water, or soil.

Methods for cleanup:
Contain spill with inert absorbent material such as sand or vermiculite.
Collect into suitable containers for disposal in accordance with local regulations.
Clean contaminated area thoroughly after removal.

Exposure Controls / Personal Protection of WANOL C2010:

Engineering controls:
Provide adequate ventilation, especially in enclosed or heated processing areas.

Respiratory protection:
Use appropriate respiratory protection if ventilation is insufficient or if vapors or mists are generated.

Hand protection:
Wear chemical-resistant gloves.

Eye protection:
Use safety goggles or face shield.

Skin and body protection:
Wear suitable protective clothing to prevent prolonged skin contact.

Hygiene measures:
Wash hands thoroughly after handling.
Remove contaminated clothing and wash before reuse.

Identifiers of WANOL C2010:
Chemical name: Polyether polyol
Product name: WANOL C2010
Chemical family: Polyether polyol
Application class: Polyurethane raw material / CASE polyol
Functionality: Typically difunctional (diol)
Physical form: Liquid

Appearance: Clear to slightly hazy, colorless to pale yellow

Chemical Name: Poly[oxy(methyl-1,2-ethanediyl)], .alpha.- hydro-.omega.-hydroxy
CAS #: 25322-69-4
Synonyms: Polypropylene glycol

CAS Number: 25322-69-4 (typical for polypropylene glycol)
EC Number: 500-039-8
Molecular Formula: HO–(C3H6O)n–H
Average Molecular Weight: Approx. 1000 g/mol
Functional Groups: Terminal hydroxyl (–OH) groups
Physical State: Liquid
Appearance: Clear to slightly yellow liquid

Properties of WANOL C2010:
Physical state: Liquid
Appearance: Clear to slightly yellow
Odor: Mild characteristic odor
Average molecular weight: Approx. 1000 g/mol
Chemical structure: Polypropylene glycol backbone with terminal hydroxyl (–OH) groups
Hydroxyl value: Approx. 105–115 mg KOH/g
Viscosity (25 °C): Medium viscosity
Density (25 °C): Approx. 1.00–1.05 g/cm³

Appearance: Colorless
Color, APHA: ≤50
Viscosity (25℃), mPa·s: 100~200
Water content, %: ≤0.03
Density, g/cm3: 1.00±0.10
K+, ppm: ≤3
PH: 5~7
OHV, mgKOH/g: 112±3.5