PRODUCTS

WANOL C2020

Wanol C2020 is employed in sports and leisure products such as protective padding, gym mats, exercise equipment cushioning, and recreational foam products.
Wanol C2020 is also used in healthcare cushioning systems including patient support surfaces, wheelchair cushions, rehabilitation equipment padding, and pressure-management products.
Wanol C2020 is used to produce polyurethane elastomers, adhesives, sealants, and binders for rubber crumb.

CAS Number: Not specifically assigned to the commercial product grade
EC Number: Not uniquely assigned
Molecular Formula: Variable polymeric structure (not uniquely defined)
Molecular Weight: Typically within a broad molecular weight distribution, generally ranging from approximately 2000–6000 g/mol depending on product specification

SYNONYMS:
Poly[oxy(methyl-1,2-ethanediyl)], .alpha.- hydro-.omega.-hydroxy, Polyether Polyol, Polyether Triol, Polyoxypropylene Polyol, Polyoxyalkylene Polyol, Flexible Foam Polyol, Polyurethane Polyol, HR Polyol, Flexible Polyurethane Foam Polyol, Polyether Alcohol, Polyol Resin

Wanol C2020 is a propanediol based polyether polyol.
Wanol C2020 is suitable to produce PU elastomers , especially for CASE and many other applications.
The foams used Wanol C2020 produced thus have better physical properties.

Wanol C2020 is a polyether polyol.
Wanol C2020 is designed for adhesives.
Wanol C2020 is a polyether polyol by Wanhua Chemical.

Wanol C2020 is designed for coatings.
Based on Wanol C2020, a new waterproof polyether optimized for waterproof coatings.
Wanol C2020 has the performance characteristics of low product viscosity and high elongation, meeting the growing performance needs of downstream customers and providing customers with more reliable and durable solutions.

Wanol C2020 can improve the flexibility of polyurethane, improve the elongation performance based on the original product system, optimize the application of waterproof coatings, and provide lasting protection.
Wanol C2020 is a polyether polyol based on propylene glycol.

Wanol C2020 is suitable for the production of polyurethane elastomers, especially for the production of polyurethane coatings, adhesives, sealants and other uses.
Polyurethane foam prepared with Wanol C2020 as raw material has good physical properties.

Wanol C2020 adopts efficient reaction mass transfer and strict processing procedures.
Wanol C2020 has very few side reactions, lower organic volatile content, better product stability with environmentally friendly characteristics, and is especially suitable for solvent-free systems.
Wanol C2020 can improve the user experience of downstream.

The new waterproof polyether not only achieves breakthroughs in application performance, but Wanol C2020's high quality and green and environmentally friendly features also enrich the applications of waterproof coatings and promote the quality upgrade of the waterproof market.

Wanol C2020 is a propanediol-based polyether polyol; it is suitable for creating PU elastomers, particularly for CASE (coatings, adhesives, sealants, elastomers) and many other applications.
Foams produced using Wanol C2020 have improved physical properties.

Wanol C2020 is a triol with a molecular weight of 2000.
Wanol C2020 is a polyether polyol based on propanediol.
Wanol C2020 is a polyether polyol produced for the manufacture of flexible polyurethane foams and polyurethane-based materials.

Wanol C2020 belongs to the Wanol series of polyether polyols that are widely used in combination with aromatic isocyanates such as TDI and MDI to produce flexible, resilient, and durable polyurethane products.
Wanol C2020 serves as an important hydroxyl-functional raw material in polyurethane chemistry and contributes to the development of foam structures with excellent comfort, elasticity, resilience, and long-term mechanical stability.

Wanol C2020 is commonly utilized in furniture cushioning, bedding products, automotive seating systems, packaging materials, acoustic foams, and specialty flexible polyurethane applications.
Wanol C2020's balanced molecular architecture allows formulators to optimize foam hardness, load-bearing performance, resilience, and durability according to specific application requirements.
Wanol C2020 is a commercial polymeric polyether polyol and does not consist of a single pure chemical compound.

USES and APPLICATIONS of WANOL C2020:
Wanol C2020 is extensively used in the production of premium residential mattresses, including comfort layers, support cores, pillow-top constructions, and specialty sleep products designed for enhanced comfort and durability.
Wanol C2020 is widely utilized in upholstered furniture manufacturing, including sofas, recliners, lounge chairs, modular seating systems, and luxury furniture products requiring long-term resilience and shape retention.

In the automotive industry, Wanol C2020 is used in molded seat cushions, headrests, armrests, backrest padding, door panel cushioning, and interior comfort systems designed to improve passenger experience.
Wanol C2020 is frequently employed in commercial seating applications such as office chairs, conference seating, cinema seating, stadium seating, and public transportation seating systems.

Wanol C2020 is used in railway seating, aircraft seating, marine seating, and specialty transportation interiors where a combination of comfort, durability, and weight reduction is important.
Wanol C2020 plays an important role in acoustic insulation materials used in recording studios, theaters, office buildings, industrial facilities, HVAC systems, and transportation vehicles.

In healthcare applications, Wanol C2020 is used in hospital mattresses, rehabilitation cushions, patient positioning systems, wheelchair cushions, and pressure-management products intended to improve comfort and support.
Wanol C2020 is suitable for protective packaging materials designed to absorb shock, vibration, and impact during transportation of sensitive equipment and fragile products.

Wanol C2020 is used in sports and recreation applications including athletic padding, protective equipment, gymnasium mats, fitness equipment cushioning, and recreational seating products.
Wanol C2020 is also incorporated into carpet cushion systems, flooring underlays, and building comfort materials that improve impact absorption and acoustic performance.

Wanol C2020 can be utilized in specialty flexible polyurethane elastomer systems where a combination of flexibility, resilience, and durability is required.
Wanol C2020 is widely used in the production of flexible polyurethane foams for mattresses, pillows, cushions, upholstered furniture, and comfort products.

Wanol C2020 is extensively employed in automotive seating systems including seat cushions, headrests, armrests, backrests, and interior comfort components.
Wanol C2020 is commonly utilized in high-resilience foam formulations designed for premium bedding products and ergonomic seating systems.

Wanol C2020 is used in carpet underlays and flooring cushioning materials that improve comfort, impact absorption, and acoustic performance.
Wanol C2020 is applied in packaging foams used to protect delicate electronics, medical equipment, and industrial components during transportation.

In acoustic applications, Wanol C2020 is utilized in sound-absorbing foams and noise-control materials for buildings, transportation systems, and industrial environments.
Wanol C2020 is suitable for footwear applications including insoles, comfort inserts, and cushioning layers.

BENEFITS of WANOL C2020:
Wanol C2020 enables manufacturers to create polyurethane foams that maintain comfort and support throughout extended service life.
The resulting materials can retain their cushioning properties even after prolonged use.
Wanol C2020 contributes to improved foam durability by helping reduce permanent deformation and compression set.
This allows finished products to maintain their original shape and performance characteristics for longer periods.

Wanol C2020's balanced formulation characteristics support the production of lightweight foam structures with good mechanical integrity, helping manufacturers achieve performance targets while minimizing material consumption.
Wanol C2020 contributes to improved pressure distribution properties, making it suitable for applications where user comfort is a primary consideration.

Wanol C2020 can help improve acoustic absorption performance in flexible foam products by supporting the formation of interconnected open-cell structures.
Wanol C2020 assists in achieving stable foam density and uniform physical properties throughout large production batches, which improves manufacturing consistency and quality control.

Wanol C2020's versatility allows producers to formulate products ranging from economical comfort foams to premium high-resilience polyurethane systems.
Wanol C2020 also contributes to improved vibration damping characteristics, helping reduce the transmission of mechanical energy and noise.

Wanol C2020 contributes to the production of polyurethane foams with excellent comfort and cushioning performance.
Wanol C2020 improves resilience and recovery characteristics, helping maintain foam performance over long service periods.

Wanol C2020 supports balanced load-bearing properties while preserving softness and flexibility.
Wanol C2020 contributes to improved fatigue resistance and durability in foam products exposed to repeated use.

Wanol C2020 promotes consistent foam processing and helps minimize manufacturing defects such as shrinkage, collapse, and uneven cell structures.
Wanol C2020 enhances airflow and breathability in open-cell foam systems.

Wanol C2020 enables manufacturers to tailor foam hardness, support characteristics, and resilience according to application requirements.
Wanol C2020 supports efficient production and stable quality control in flexible foam manufacturing.

TECHNICAL ADVANTAGES of WANOL C2020:
Wanol C2020 helps produce lightweight polyurethane foams that combine comfort with structural integrity.
Wanol C2020 contributes to improved compression set resistance, helping foams maintain their original dimensions during long-term use.
Wanol C2020's balanced molecular weight distribution supports uniform polyurethane network formation and consistent physical properties.
Wanol C2020 promotes excellent foam rise characteristics and controlled cell development during processing.

Wanol C2020 supports the manufacture of products with enhanced vibration damping and energy absorption capabilities.
Wanol C2020 enables formulators to optimize tensile strength, elongation, tear resistance, resilience, and support factors within polyurethane foam systems.

Its processing flexibility makes Wanol C2020 suitable for both slabstock foam production and molded foam manufacturing technologies.
Wanol C2020 remains a versatile polyether polyol for furniture, bedding, transportation, healthcare, packaging, acoustic, and specialty polyurethane applications.

CHARACTERISTICS of WANOL C2020:
Wanol C2020 is known for its ability to provide an excellent balance between foam softness and structural support.
This balance makes Wanol C2020 particularly attractive for applications where long-term comfort must be combined with durability and dimensional stability.
Wanol C2020 contributes to the formation of highly uniform open-cell polyurethane foam structures.

Uniform cell morphology is important for achieving consistent airflow, comfort characteristics, mechanical performance, and overall product quality.
Wanol C2020 demonstrates excellent processing latitude, allowing manufacturers to operate under a wide range of production conditions while maintaining stable foam quality.

This characteristic is particularly valuable in large-scale slabstock and molded foam production facilities.
Wanol C2020 exhibits excellent compatibility with advanced polyurethane additives, including low-emission catalysts, specialty surfactants, flame retardants, fillers, and performance-enhancing modifiers.

This compatibility allows manufacturers to develop customized formulations for specific performance targets.
Wanol C2020's polyether backbone contributes to good hydrolysis resistance and long-term stability compared with many alternative polymer systems.

This characteristic can be advantageous in applications exposed to varying humidity conditions.
Wanol C2020 also supports the development of polyurethane foams with good resilience and energy return characteristics, which are important in comfort-oriented applications such as seating and bedding.

Wanol C2020 helps produce foams with controlled compression characteristics, allowing manufacturers to optimize support factors and comfort levels for different market segments.
Wanol C2020 is characterized by its ability to produce flexible polyurethane foams with a desirable balance of softness, resilience, support, and durability.

Wanol C2020 contributes to the formation of uniform foam cell structures, which are essential for achieving consistent comfort and mechanical performance in finished polyurethane products.
Wanol C2020's molecular structure promotes excellent elasticity and recovery behavior, allowing foams to return quickly to their original shape after repeated compression.

Wanol C2020 demonstrates excellent compatibility with polyurethane catalysts, silicone surfactants, blowing agents, flame retardants, and specialty additives.
Wanol C2020 supports stable foam processing and helps maintain consistency during large-scale manufacturing operations.
Wanol C2020's versatility allows formulators to develop both conventional flexible foams and high-resilience foam systems for demanding applications.

TECHNICAL PERFORMANCE ADVANTAGES of WANOL C2020:
Wanol C2020 supports excellent foam processability and helps manufacturers achieve consistent cell structure, density distribution, and mechanical properties throughout production.
Wanol C2020 contributes to efficient foam rise behavior and controlled polymer network formation, helping reduce processing variability.

Wanol C2020's molecular design allows formulators to optimize resilience, support factor, tensile strength, tear resistance, elongation, and compression performance according to application needs.
Wanol C2020 helps produce foams with excellent fatigue resistance, allowing them to withstand repeated loading cycles without significant performance degradation.

Wanol C2020 contributes to improved dimensional stability and reduced risk of foam shrinkage during curing and aging.
Its versatility makes Wanol C2020 suitable for both conventional flexible foam technologies and advanced high-resilience polyurethane foam systems.
Wanol C2020 remains an important polyether polyol for manufacturers seeking a combination of comfort, durability, processing stability, and formulation flexibility across a wide range of polyurethane applications.

PHYSICAL and CHEMICAL PROPERTIES of WANOL C2020:
Product Name: WANOL® C2020
Chemical Type: Polyether Polyol
Chemical Family: Polyether Alcohol
Polymer Type: Polyoxyalkylene Polyol
Physical State: Liquid
Appearance: Clear to pale yellow liquid
Primary Application: Flexible Polyurethane Foam Production
Functionality: Typically 2–3

Odor: Mild characteristic polyether odor
Color: Colorless to light yellow
Density (25°C): Approximately 1.00–1.08 g/cm³
Viscosity (25°C): Medium viscosity liquid
Hydroxyl Number: Product specification dependent
Functionality: Typically 2–3
Water Content: Very low
Vapor Pressure: Negligible
Flash Point: Generally above 150°C

Solubility in Water: Partial to complete depending on composition
Solubility in Organic Solvents: Soluble in many polar solvents
Hygroscopic Nature: Slightly hygroscopic
Storage Stability: Good under recommended conditions
Shelf Life: Typically 6–12 months
Chemical Family: Polyether Polyol
Functional Groups: Hydroxyl (-OH)
Reactivity with Isocyanates: Excellent
Polyurethane Formation: Rapid in presence of catalysts
Compatibility with TDI: Excellent

Compatibility with MDI: Excellent
Thermal Stability: Good
Hydrolysis Resistance: Good
Oxidation Resistance: Moderate
Processing Stability: High
Foam Cell Control: Good
Polymer Backbone Stability: Good
Crosslinking Contribution: Adjustable through formulation design
Compatibility with Additives: Excellent

FIRST AID MEASURES of WANOL C2020:
-Description of first-aid measures
*General advice:
Show this material safety data sheet to the doctor in attendance.
*If inhaled:
After inhalation:
Fresh air.
*In case of skin contact:
Take off immediately all contaminated clothing.
Rinse skin with
water/ shower.
*In case of eye contact:
After eye contact:
Rinse out with plenty of water.
Call in ophthalmologist.
Remove contact lenses.
*If swallowed:
After swallowing:
Immediately make victim drink water (two glasses at most).
Consult a physician.
-Indication of any immediate medical attention and special treatment needed.
No data available

ACCIDENTAL RELEASE MEASURES of WANOL C2020:
-Environmental precautions:
Do not let product enter drains.
-Methods and materials for containment and cleaning up:
Cover drains.
Collect, bind, and pump off spills.
Observe possible material restrictions.
Take up dry.
Dispose of properly.
Clean up affected area.

FIRE FIGHTING MEASURES of WANOL C2020:
-Extinguishing media:
*Suitable extinguishing media:
Carbon dioxide (CO2)
Foam
Dry powder
*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.
-Further information:
Prevent fire extinguishing water from contaminating surface water or the ground water system.

EXPOSURE CONTROLS/PERSONAL PROTECTION of WANOL C2020:
-Control parameters:
--Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:
*Eye/face protection:
Use equipment for eye protection.
Safety glasses
*Body Protection:
protective clothing
*Respiratory protection:
Recommended Filter type: Filter A
-Control of environmental exposure:
Do not let product enter drains.

HANDLING and STORAGE of WANOL C2020:
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Tightly closed.
Dry.

STABILITY and REACTIVITY of WANOL C2020:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature).
-Possibility of hazardous reactions:
No data available