ZELIQUID LP 2

Application:
widely used in liquid cleanser such as hair shampoo, bath shampoo etc.

Zeliquid® LP 2: Lauryl ethersulphate with 3 mole EO, ammonium-salt
(contains solvent butoxy ethanol)

Chemical description Ammonium lauryl ether sulfate based on natural fatty alcohol ethoxylate C12-14 with 3 moles of EO
INCI name Ammonium Laureth-3 Sulfate

Ammonium Laureth-3 Sulfate. Spolapon AES 243 AM by Enaspol acts as an anionic surfactant and foaming agent. It is an ammonium lauryl ether sulfate based on natural C12-14 fatty alcohol ethoxylate with 3 moles of EO. It exhibits copious stable foam with favourable viscosity properties. Moreover, it provides low irritation and ready biodegradability. Spolapon AES 243 AM is recommended for liquid shampoos, skin cleaning agents with low pH and baby products.

Active: 50%
applications: Building industry, emulsion polymerization
functions: surfactant - cleansing agent, cleansing, foaming, and surfactant

Information on basic physical and chemical properties
Appearance: Liquid
Color: light yellow
Odor: ammonia scented
Odor Threshold: not determined
pH: 7 - 8 (20 ° C)
Concentration: 10 g / l
Solidification point: <0 ° C
Boiling point:> 100 ° C
Flash point:> 100 ° C
Method: DIN 51758
Evaporation rate: not determined
Flammability (solid, gas): Not applicable
Burning number: Not applicable
Upper explosive limit / Upper: Not applicable

Components:
Polyethylene glycol C10-12-alkyl ethers sulfates, ammonium salts
CAS: 68890-88-0
Concentration (% w / w):> = 50 - <70

2-Butoxyethanol
CAS: 111-76-2
Concentration (% w / w):> = 20 - <30

APPLICATIONS

Sulfonic acid is a compound with general formula RSO2OH, where R is an aliphatic or aromatic hydrocarbon. It is a derivative of sulfuric acid (HOSO2OH) where an OH has been replaced by a carbon group or a compound where a hydrogen atom has been replaced by treatment with sulfuric acid; for example, benzene is converted to benzenesulfonic acid (water-soluble). Sulfonic acid has a sulfur atom bonded to a carbon atom of a hydrocarbon and bonded also to three oxygen atoms, one of which has been attached to a hydrogen atom. Sulfonic acid is acidic due to the hydrogen atom, stronger than a carboxylic acid. Sulfonic acid is one of the most important organo sulfur compounds in organic synthesis. Sulfonic acids are used as catalysts in esterification, alkylation and condensation reactions. Sulfonates are salts or esters of sulfonic acid. Sulfonic salts are soluble in water. Sulfonic acid and its salts present in organic dyes provide useful function of water solubility and or improve the washfastness of dyes due to their capabiltity of binding more tightly to the fabric. They are widely used in the detergent industry. Alkylbenzene sulfonic acid is the largest-volume synthetic surfactant because of its relatively low cost, good performance, the fact that it can be dried to a stable powder and the biodegradable environmental friendliness. Sodium lauryl sulfate (SLS), prepared by sulfation of lauryl alcohol and neutralisation with sodium carbonate, is another common surfactant which has an amphiphilic properties due to C12 chain ( lipophilic) attached to a sulfate group (hydrophilic). This bifunctionality in one molecule provides the basic properties useful in cleaners and detergents. SLS is used as a wetting agent in textiles, foaming and cleaning agent in detergent, cosmetic emulsifier, and sometimes in toothpastes. Sulfonate cleaners do not form an insoluble precipitates in hard water. Ammonium lauryl sulfate (ALS) is a structurally related compound, replacing ammonium group for sodium. They have same applications. But they cause skin and eye irritation, and are therefore not useful in in products that are on the skin for a long time. The ethoxylated SLS and ALS are less irritant on the skin; sodium laureth sulfate (sodium lauryl ether sulfate, SLES) and ammonium laureth sulfate (ammonium lauryl ether sulfate, ALES) which are prepared by addition of ethylene oxide. SLES and ALES are used as a foaming and viscosity builder in shampoos and personal care products (such as bubble bath, shaving cream , ointment, and tooth pastes sometimes) particularly of low pH products. One more common feature of them appears to be the compatibility with other surfactants.

Zeliquid® LP 2 is an anionic wetting agent and emulsifier. It is composed of lauryl polyglycol ether sulphate with 3 mole ethylene oxide, ammonium salt. It is compatible with other anionic and nonionic surfactants and resistant to water hardness. In mineral acid solutions at elevated temperatures Zeliquid® LP 2, like all ether sulphates, tends to hydrolyse. This product is used as a wetting agent, dispersing agent and emulsifier.

Aniyonik Islatıcı Ve Emülsiye Edici Maddedir. Su Sertliğine Karşı Dirençlidir Ve Diğer Aniyonik Ve Noniyonik Yüzey Aktif Maddelerle Uyumludur. Zeliquid Lp 2, Ales, Alçı Plaka, Köpük Yapıcı, Alçı, Köpürtücü Ammonium Lauryl Ethersulfate 50 % ( Ammonyum Lauril Etersülfat ) 

Lauryl polyethylene glycol ethersulfate with 3 EO, ammonium salt, butoxy ethanol as solvent

This ingredient is an ammonium salt of ethoxylated lauryl sulfate, a surfactant that contains PEG (polyethylene glycol) in its structure. May be contaminated with potentially toxic manufacturing impurities such as 1,4-dioxane.

application :Air entraining agent for concrete and mortars

Zeliquid® LP 2    Tributyl phenol polyethylene glycol ethersulfate with 7 EO, sodium salt

Zeliquid LP2 (Zeliquid LP2) Alçı levha üretimi için güçlü şişirme maddesi; alçı ve duvar çözümlerinin bileşiminde, ıslak çözeltilerde, köpük betonda ve zemin kütlesinde kullanılır

a lot more Zeliquid LP 2 Zeliquid LP 2 is compatible with other anionic and nonionic surfactants and immune to water hardness.

Zeliquid® LP 2 is an anionic wetting agent and emulsifier. It is composed of lauryl polyglycol ether sulphate with 3 mole ethylene oxide, ammonium salt. It is compatible with other anionic and nonionic surfactants and resistant to water hardness. In mineral acid solutions at elevated temperatures Zeliquid® LP 2, like all ether sulphates, tends to hydrolyse. This product is used as a wetting agent, dispersing agent and emulsifier.

Ammonium laureth sulfate is an Ammonium salt of ethoxylated lauryl sulfate Ammonium laureth sulfate uses and applications include: Surfactant, emulsifier for emulsion polymerization (acrylics, styrene-acrylic, vinyl acrylics, SB, paints, coatings), lt.-duty detergents, textiles, cosmetics, hair and skin detergents, pharmaceutical creams and lotions; breaks up and holds oils and soil; viscous builder; foaming agent for plasterboard, lightweight concrete production; in food packaging adhesives

CLASS

Specialty Chemicals 

FUNCTIONS

Surfactant,  Emulsifier 

INDUSTRY

Cosmetic,  Pharmaceutical,  Textiles,  Adhesives,  Acrylics,  Detergent 

Description
Light yellow viscous liquid; [MSDSonline]
Sources/Uses
Used as a foaming and cleansing agent in shampoos and cleaners; 

(organic chemistry) Compound formed by the ethoxylation of ammonium lauryl sulfate. Has properties similar to sodium laureth sulfate.

Chemical Taxonomy
Description    belongs to the class of organic compounds known as sulfuric acid monoesters. These are organic compounds containing the sulfuric acid monoester functional group, with the generic structure ROS(O)(=O)=O, (R=organyl group).
Kingdom    Organic compounds 
Super Class    Organic acids and derivatives 
Class    Organic sulfuric acids and derivatives 
Sub Class    Sulfuric acid esters 
Direct Parent    Sulfuric acid monoesters 
Alternative Parents    
Alkyl sulfates 
Dialkyl ethers 
Organic oxides 
Organic nitrogen compounds 
Hydrocarbon derivatives 
Substituents    
Alkyl sulfate
Sulfate-ester
Sulfuric acid monoester
Ether
Dialkyl ether
Organic nitrogen compound
Organic oxygen compound
Organic oxide
Hydrocarbon derivative
Organooxygen compound
Aliphatic acyclic compound

LIQUID AIR ENTRAINER
Zeliquid LP 2 is compatible with other anionic and nonionic surfactants and resistant to water hardness.

Product Description
Zeliquid LP 2 is compatible with other anionic and nonionic surfactants and resistant to water hardness.

Spolapon AES 243 AM is an anionic surfactant commonly used as an ingredient in the production of fine personal care and cosmetic products. Most notably it exhibits copious stable foam with favourable viscosity properties. The product is especially suitable for liquid shampoos, skin cleaning agents with low pH and owing to its low irriation it is recommended for baby products.
 
Spolapon AES 243 AM is highly valued for its ready biodegradability. Such properties allow the product to be used also in industrial foaming agents.

Description of first aid measures
General recommendation:
Take off immediately all contaminated clothing. When you consult your doctor, show this safety data sheet.
In case of inhalation:
In case of inhalation, remove to fresh air.
Get medical advice / contact your doctor.
In case of skin contact:
In case of contact, immediately wash the skin with plenty of soap and water.
In case of eye contact:
Rinse immediately with plenty of water for at least 15 minutes, also inside the eyelids.
Consult the doctor.
If swallowed:
If swallowed, seek medical advice immediately and show this container or label to medical personnel.
Most important symptoms and effects, both acute and delayed
Symptoms
:
Known possible symptoms are those taken on the label (see section 2).
irritant effects
Risks:
Causes serious eye irritation.
Indication of any immediate medical attention and special treatment needed
Treatment:
Treat symptomatically.

Ammonium Laureth Sulfate. Possesses good foaming property even in hard water and the presence of a large number of dirt. Has excellent decontamination, anti-hard water and high biodegradable ability. With rich and fine foam, it endows hair the feeling of tenderness and easiness for combing an smooth as well as comfortable feeling. It is widely used in liquid detergent, high-grade shampoo, gel and weak acid shampoo and bubble bath etc.

What Does Ammonium Laureth Sulfate Do In Skincare And Haircare Products?
Ammonium Laureth Sulfate is a cleansing agent.

(P.S. If it has Laureth Sulfate or Lauryl Sulfate in the name, it’s almost always a cleansing agent).

Ever tried washing a greasy pan with water alone? It won’t do. The grease stubbornly sticks to the pan, no matter how much you scrub it. Why?

Oil and water don’t mix. Just pour some oil into a glass of water and you’ll see it neatly stays on top. It doesn’t melt into the water at all.

Excess sebum is essentially oil. Your skincare and makeup products contain oil. You need to cleanse them off your face (and the rest of your body)

Class    Small Molecule
Description    Ammonium laureth sulfate is a surfactant often found in shampoos. It can be mildly irritating. (4)
Compound Type    
Cosmetic Toxin
Ester
Ether
Household Toxin
Organic Compound
Synthetic Compound

INGREDIENTS
Is Ammonium Laureth Sulfate In Skincare Dangerous?
BY BEAUTIFULWITHBRAINS

AFFILIATE LINKS
is ammonium laureth sulfate dangerous

Is Ammonium Laureth Sulfate in skincare dangerous?

You’ll usually find it on all the to-avoid lists, but what did it do to deserve a spot there? Is it as dangerous as people claim or are people making a fuss about nothing again?

Let’s investigate:

Your Guide To The Ordinary Acne Products
×
Table Of Contents
What Is Ammonium Laureth Sulfate?
What Does Ammonium Laureth Sulfate Do In Skincare And Haircare Products?
Does Ammonium Laureth Sulfate Has Any Side Effects?
Where Can You Find Ammonium Laureth Sulfate?
The Bottom Line
What Is Ammonium Laureth Sulfate?
Scientific definition: Ammonium Laureth Sulfate is the ammonium salt of sulfated ethoxylated lauryl alcohol.

Plain English: A cleansing agent derived from coconut. The type used in skincare and haircare products is almost always synthetically made in a lab.

You’ll find it mostly in cleansing products like cleansers, shower gels, shampoos, etc.

P.S. Ammonium Laureth Sulfate is a large molecule, so it can’t penetrate skin.

Want to know what ingredients you really need to avoid in your skincare products? Sign up to the newsletter below to receive the “Skincare Ingredients To Avoid” cheatsheet:

Avoid These Skincare Ingredients!
The real bad boys of skincare you DON'T want in your products.

What Does Ammonium Laureth Sulfate Do In Skincare And Haircare Products?
Ammonium Laureth Sulfate is a cleansing agent.

(P.S. If it has Laureth Sulfate or Lauryl Sulfate in the name, it’s almost always a cleansing agent).

Ever tried washing a greasy pan with water alone? It won’t do. The grease stubbornly sticks to the pan, no matter how much you scrub it. Why?

Oil and water don’t mix. Just pour some oil into a glass of water and you’ll see it neatly stays on top. It doesn’t melt into the water at all.

Excess sebum is essentially oil. Your skincare and makeup products contain oil. You need to cleanse them off your face (and the rest of your body). But how?!
  

Does Ammonium Laureth Sulfate Has Any Side Effects?
Here’s the deal: all surfactants have the potential to be drying. They have to be. They literally remove oils and dirt from your skin. If they were too gentle, they wouldn’t be able to take off anything!

FYI, this is why it’s SO hard to find a sulfate-free shampoo that actually cleans oily hair. They’re too gentle and can’t remove anything unless you use the whole bottle (which totally defeats the purpose).

But you don’t want to use anything that’s even a little more drying than it needs to be. As a rule of thumb, surfactants with laurYL in the name ARE too harsh. Avoid them.

But what about those that have laurETH in the name, like Ammonium Laureth Sulfate? They’re in the perfect spot. They’re powerful enough to cleanse skin AND gentle enough not to dry it out and irritate it. Win win.

Sure, if you have very sensitive skin, there’s always the potential Ammonium Laureth Sulfate is too drying for you. But for 90% of people, it’s totally safe.

We often buy shampoo without really knowing what’s in it.

We may have been seduced into said purchase because of an attractive price, an online ad or a recommendation from a friend. Or – and let’s be honest here – simply because we liked the design and colour of the bottle.

It can be very disappointing to discover that, after a few times of using it, our hair does not feel its usual, silky self. We notice a crispiness, lesser defined curls, perhaps even damage.

Naturally, this will get us thinking about our choice of shampoo and whether it’s really the right fit for our hair or not.

Upon studying the ingredients listed on the bottle and trying to figure out how beneficial or harmful they can be to our curly hair, we are faced with many terms we are completely unfamiliar with.

Among them, we have several types of sulfates, the different types of which can be just as difficult to identify.

One of these sulfates is the ammonium laureth sulfate.

You have probably used several products containing this sulfate; it is common in all types of beauty and cosmetic goods including shampoos, but also toothpaste, body gels and soaps. It is a widely used ingredient in these kinds of products, not only because of its cleansing properties but also because it is very economical.

There is a lot of speculation about this particular sulfate and its effects on our hair, with many sources advocating for its use and many others warning us against it. In this article, we’ll get to the bottom of this common shampoo ingredient and its characteristics.

Ammonium Lauryl Ether Sulfate is also known as Ammonium Diethylene glycol and in its physical state is a clear to yellow liquid. AmmoniumLauryl Ether Sulfate for lawns  is marketed as a liquid aerator to loosen compacted soil. It results in better root growth and greater crop yields. The compound does have emulsifying properties that causes it to bind to and dissolve dirt and oil in the hair. It is often used in less expensive shampoos to increase lather, but is also suspected of causing hair loss due to its harshness on hair follicles and irritation to skin. Ammonium Lauryl Ether Sulfate MSDS cautions that the compound may cause moderate irritation to the eyes, the skin, and the respiratory system. When in direct contact with high concentrations of the compound, personal protective equipment such chemical goggles and impervious gloves should be worn. Chemical Formula - RO(CH2CH2O)3SO3NH4

With the help of our team of experienced professionals, we manufacture, trade and supply an extensive range of Ammonium Lauryl Ether Sulphate. This chemical is formulated under extreme conditions using superior quality chemical substances in compliance with the international standards. The offered Ammonium Lauryl Ether Sulphate is widely appreciated for their purity, high effectiveness, precise pH value, longer shelf life and elevated quality. In order to ensure flawlessness and eco-friendliness, our chemicals are stringently tested on defined parameters.

Characteristics:
1, Excellent decontamination, anti-hard water and high biodegradable ability.
2, Good foaming property even in hard water and the presence of a large mumber of dirt.
3, With rich and fine foam, it endows hair the feeling of tenderness and easiness for
combing an smooth and comfortable feeling.
4, Not applicable in alkaline system.
Application:
1, Widely used in liquid detergent, high-grade shampoo, gel and weak acid shampoo and
bubble bath etc.
2, Used in glass cleanser, wall detergent, automobile detergent and hard surface cleanser.
3, The recommended dosage is 5-30%.
Precautions
Under the circumstance of high temperature (above 40 degrees centigrade) or acidic
condition (ph ≤5), it will be decomposed. Which is due to hydrolysis caused by ALES.
Considering this situation, the product should be stored under the circumstance of lower
than 40 degrees centigrade. In its PH ranges, ALES is especially suitable for propagation of
microorganism. During sampling or application, attention shall be taken to prevent
microorganism contamination. Try to carry out the work under germless conditions. 

Ammonium Lauryl Ether Sulfate (ALES or AESA) 70%
Appearance,25℃: White to yellowish paste
Odor: Faint characteristic odor 
Active matter, %: 70±2
Unsulfated matter, %: 3.0 max.
Ammonium sulfate, %: 1.5 max.
Ammonium chloride, %: 0.3 max.
Fe, mg/Kg: 5 max.
Ph value (25℃, 1% Am.aq.sol): 5.5-7.0
Color, Hazen (5% Am.aq.sol): 10 max.
Ammonium Lauryl Ether Sulfate (ALES or AESA) 25%
Appearance,25℃: White to yellowish paste
Odor: Faint characteristic odor
Active matter, %: 25±1
Unsulfated matter, %: 1.0 max.
Ammonium sulfate, %: 0.5 max.
Ammonium chloride, %: 0.1 max.
Fe, mg/Kg: 5 max.
Ph value (25℃, 1% Am.aq.sol): 5.5-7.0
Color, Hazen (5% Am.aq.sol): 10 max. 

What is ammonium laureth sulfate?

Not to be confused with Ammonium lauryl sulfate, continue read to see the difference. 

Ammonium Laureth Sulfat, sometimes also called ammonium lauryl ether sulfate, is the ammonium salt of ethoxylated lauryl sulphate. The molecular formula of the chemical compound is C14H33NO5S.

ALES Ammonium Lauryl Ether Sulfate
[:en]ALES Ammonium Lauryl Ether Sulfate is an anionic detergent and surfactant found in many personal care products (soaps, shampoos, toothpaste etc.). It is white or light yellow viscous paste. ALES is rich in fine foam and has excellent detergency,hard water resistency And high biodegradation.Hair shampoo with ALES has excellent combing ability And comfortability to skin. ALES has good detergency, washing, cleaning, foaming, and high biodegradation performances. It has good resistance to hard water. Even there are large amount of dirt in hard water, the lathering power still retains high, with rich and fine foam, little irritate to skin.[:]

Toxicity Profile
Route of Exposure    Oral (3) ; inhalation (3) ; dermal (5)
Mechanism of Toxicity    While ammonium laureth sulfate itself is not toxic, it is a nitrosating agent. Nitrosating agents may decompose and/or react to cause nitrosamine contamination. Nitrosamines are produced from secondary amines and amides in the presence of nitrite ions and are believed to be carcinogenic. Once in the body, nitrosamines are activated by cytochrome P-450 enzymes. They are then believed to induce their carcinogenic effects by forming DNA adducts at the N- and O-atoms. (5, 6, 1, 2, 3)
Metabolism    Nitrosamines can enter the body via ingestion, inhalation, or dermal contact. Once in the body, nitrosamines are metabolized by cytochrome P-450 enzymes, which essentially activates them into carcinogens. (1, 2)
Toxicity Values    Not Available
Lethal Dose    Not Available
Carcinogenicity (IARC Classification)    Not listed by IARC. Certain nitrosamines are classified by IARC as either probably or possibly carcinogenic to humans (Groups 2A and 2B, respectively). (7)
Uses/Sources    Ammonium laureth sulfate is a surfactant often found in shampoos. (4)
Minimum Risk Level    Not Available
Health Effects    Ammonium laureth sulfate itself only causes mild irritation. However, it may react to produce nitrosamines, which are believed to be carcinogenic. (4, 6)
Symptoms    Ammonium laureth sulfate can cause mild irritation.