ZELIQUID LP 2

Zeliquid LP 2 is used in the production of gypsum plasterboard.
Zeliquid LP 2 creates small air pockets in gypsum plasterboard.

Zeliquid LP 2 is liquid air-entraining agent for gypsum plasterboard production.

Zeliquid LP 2 is lauryl polyglycol ether sulfate with 3 moles of ethylene oxide, ammonium salt.
Zeliquid LP 2 is used as anionic wetting agent and emulsifier.

Zeliquid LP 2 is an anionic wetting agent and emulsifier. 
Zeliquid LP 2 is composed of lauryl polyglycol ether sulphate with 3 mole ethylene oxide, ammonium salt. 

Zeliquid LP 2 is compatible with other anionic and nonionic surfactants and resistant to water hardness. 
In mineral acid solutions at elevated temperatures Zeliquid LP 2, like all ether sulphates, tends to hydrolyse. 
Zeliquid LP 2 is used as a wetting agent, dispersing agent and emulsifier.

Applications of Zeliquid LP 2:
Construction
Concrete Admixture

Function of Zeliquid LP 2:
Air Entrainers

Uses of Zeliquid LP 2:
Zeliquid LP 2 is used as anionic wetting agent and emulsifier.
Zeliquid LP 2 is used as a wetting agent, dispersing agent and emulsifier.
Zeliquid LP 2 is used in the production of gypsum plasterboard.

Zeliquid LP 2 is used as:
Wetting agent
Dispersing agent and
Emulsifier

Compatibility of Zeliquid LP 2:
Zeliquid LP 2 is compatible with other anionic and nonionic surfactants and resistant to water hardness. 
In mineral acid solutions at elevated temperature Zeliquid LP 2 like all ether sulphates tends to hydrolyse.

Storage and Shelf Life of Zeliquid LP 2:
Please keep Zeliquid LP 2 in a dry and clean place. 
The material should be stored in tightly closed containers at 20-25°C in a clean and aerated place.

The shelf life is 730 days after the date of production. 
After expiration, Zeliquid LP 2 should be analyzed for extension of the shelf life.

Handling and storage of Zeliquid LP 2:

Precautions for safe handling:

Advice on safe handling: 
Provide adequate ventilation.

Advice on protection againstfire and explosion: 
Observe the general rules of industrial fire protection.

Hygiene measures: 
Observe the usual precautions for handling chemicals. 
When using do not eat or drink. 

Keep away from food and drink.
Wash hands before breaks and at the end of workday.
Remove/ Take off immediately all contaminated clothing.

Conditions for safe storage, including any incompatibilities:

Further information onstorage conditions: 
Keep containers tightly closed in a cool, well-ventilated place.

Storage period: 
24 Months

Recommended storagetemperature: 
20 °C

First aid measures of Zeliquid LP 2:

General advice: 
Remove/ Take off immediately all contaminated clothing.
Show this safety data sheet to the doctor in attendance.

If inhaled: 
If inhaled, remove to fresh air.
Get medical advice/ attention.

In case of skin contact: 
In case of contact, immediately flush skin with soap and plenty of water.

In case of eye contact: 
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Consult a physician.

If swallowed: 
If swallowed, seek medical advice immediately and show this container or label.

Most important symptoms and effects, both acute and delayed:

Symptoms: 
The possible symptoms known are those derived from the labelling.

Risks: 
Causes serious eye irritation.

Indication of any immediate medical attention and special treatment needed:

Treatment: 
Treat symptomatically.

Firefighting measures of Zeliquid LP 2:

Suitable extinguishing media: 
Water spray jet
Carbon dioxide (CO2)
Dry powder
Alcohol-resistant foam

Special hazards arising from the substance or mixture:

Specific hazards during firefighting: 

In case of fires, hazardous combustion gases are formed:
Carbon monoxide (CO)
Nitrogen oxides (NOx)
Sulphur dioxide
Combustion gases of organic materials must in principle be graded as inhalation poisons.

Advice for firefighters:

Special protective equipmentfor firefighters: 
Use breathing apparatus.

Accidental release measures of Zeliquid LP 2:

Personal precautions, protective equipment and emergency procedures:

Personal precautions: 
Wear suitable protective clothing.
Ensure adequate ventilation.

Environmental precautions:
Do not empty into drains.

Methods and material for containment and cleaning up:

Methods for cleaning up: 
Pick up with absorbent material (eg sand, sawdust). 
Rinse away rest with water.
Can be landfilled or incinerated, when in compliance with local regulations.

Properties of Zeliquid LP 2:
Active substance content: about 50 %
Solvents:
about 20% 2-butoxyethanol and
about 27% water
Appearance at 20°C: clear liquid
pH value (DIN EN 1262), 1% in water: ca. 7 - 8
Solubility at 20 °C: soluble in water
Density (DIN 51757) at 20 °C: about 1,04 g/cm³
Viscosity (DIN 53015) at 20 °C: < 100 mPa*s
Flash point (DIN 51758): > 100 °C

Physical state: Liquid
Colour: light yellow
Odour: of ammonia
Odour Threshold: not determined
Solidification point: < 0 °C
Boiling point: > 100 °C
Flammability: Not applicable
Upper explosion limit / upper flammability limit: Not applicable
Lower explosion limit / Lower flammability limit: Not applicable
Flash point : > 100 °C
Method: DIN 51758
Auto-ignition temperature: Not applicable
Decomposition temperature: 180 °C
Method: DTA
pH: 7 - 8 (20 °C)
Concentration: 1 %

Viscosity:
Viscosity, dynamic: approx. 30 - 50 mPa.s (20 °C)
Method: DIN 53019

Viscosity, kinematic: not determined

Solubility(ies):
Water solubility: (20 °C)

Other Related Products

Air Entrainers:
Air entrainment is the intentional creation of small air pockets in concrete by the addition of an air entraining agent to the mix. 
The primary purpose of air entrainment is to increase the durability of the hardened concrete, especially in climates subject to freeze-thaw as the air pockets relieve internal pressure on the concrete by providing tiny chambers for freezing water to expand into. 
Additionally, workability of the concrete is increased.

Based on our experience in surfactant chemistry, we offer a range of air entraining agents under the brand names Hostapur and, Genapol, and Zeliquid.

Our Hostapur OSB is used as an air entraining agent for mortars, plasters and grouts based on cement, gypsum or lime. 
It is rapidly soluble, enables faster wetting of solid particles in the dry admixture and the build-up of micro foam in a short time. 
The performance of this air entrainer is superior to traditional sodium lauryl sulfates, as Zeliquid LP 2 is not sensitive to calcium salts, non-hygroscopic and twice as efficient in producing controllable, strong and stable micro foam.

Solid Air Entraining Agents:

Genapol LSS Powder:
Strong foaming agent, sensitive and stable against water hardness salts and superior foaming agent, fast foam built-up and high foam stability with micro structure. 

Hostapur OSB:
Hostapur OSB generates highly stable micro foam and is unsusceptible to water hardness. 
Additionally, Zeliquid LP 2 has a low tendency to build up viscosity. 

Liquid Air Entraining Agents:

Emulsogen EPA 1954:
Emulsogen EPA 1954 is used as anionic emulsifier for the emulsion polymerization of vinyl acetate dispersions, styrene-butadiene latex and E-PVC. 

Genapol LRO liq:
Genapol LRO liquid is a sodium lauryl ether sulfate which is a strong foaming agent and unsusceptible to water hardness. 
It is also a wetting agent and adjuvant used in crop protection applications and in industrial and home care products. 

Hostapur AE:
Blend of anionic and non-ionic surfactants more.

Hostapur OS liq:
Hostapur OS liquid is an aqueous solution of an alpha olefin sulfonate which generates highly stable micro-foam and is unsusceptible to water hardness. 
It is also used as anionic wetting agent in liquid formulations and is a high foaming primary surfactant for handy dishwashing liquids. 

Zeliquid LP 2:
Zeliquid LP 2 is compatible with other anionic and nonionic surfactants and resistant to water hardness. 

Zeliquid LPN:
Solution of anionic and nonionic surface active agents in water.