AGNIQUE CSO 40 & 20

Agnique CSO 40 & 20 is a combined commercial reference to two separate nonionic surfactant grades: Agnique CSO-40 and Agnique CSO-20.
Agnique CSO 40 & 20 is based on ethoxylated castor oil, with the two grades containing nominal average ethoxylation levels of approximately 40 EO and 20 EO, respectively.
Agnique CSO 40 & 20 provides emulsification, solubilization, wetting, dispersion support, and oil–water compatibility in agricultural and industrial formulations.

CAS Number: 61791-12-6
EC Number: 500-151-7
Generalized Molecular Formula: C₅₇H₁₀₄O₉(CH₂CH₂O)n
Molecular Weight: Variable; nominal calculated average approximately 1,814.5 g/mol for the 20 EO grade and 2,695.6 g/mol for the 40 EO grade

SYNONYMS

Agnique CSO 40 & 20, Agnique CSO-40 and Agnique CSO-20, Agnique® CSO-40, Agnique® CSO-20, Agnique CSO 40, Agnique CSO 20, Agnique CSO40, Agnique CSO20, CSO-40, CSO-20, CSO 40, CSO 20, Agnique CSO-40, Agnique CSO-20, Castor Oil Ethoxylate 40 EO, Castor Oil Ethoxylate 20 EO, Ethoxylated Castor Oil 40 EO, Ethoxylated Castor Oil 20 EO, Castor Oil Plus 40 EO, Castor Oil Plus 20 EO, Polyoxyethylene 40 Castor Oil, Polyoxyethylene 20 Castor Oil, Polyoxyethylene (40) Castor Oil, Polyoxyethylene (20) Castor Oil, POE 40 Castor Oil, POE 20 Castor Oil, POE-40 Castor Oil, POE-20 Castor Oil, PEG-40 Castor Oil, PEG-20 Castor Oil, Polyethylene Glycol 40 Castor Oil, Polyethylene Glycol 20 Castor Oil, Castor Oil Polyethoxylate 40, Castor Oil Polyethoxylate 20, Polyethoxylated Castor Oil, Castor Oil Ethylene Oxide Adduct, Castor Oil Ethylene Oxide Condensate, Ethoxylated Ricinolein, Polyethoxylated Ricinolein, Ethoxylated Glycerol Triricinoleate, Polyoxyethylene Glycerol Triricinoleate, Nonionic Castor Oil Surfactant, Renewable Nonionic Emulsifier, Castor Oil-Based Emulsifier, Oil-in-Water Emulsifier, Agricultural Nonionic Emulsifier, Agrochemical Formulation Surfactant, Crop-Protection Emulsifier, Technical Solubilizing Agent, Technical Wetting Agent, UVCB Castor Oil Ethoxylate, Product Number 30531617, Product Number 30530711, CAS 61791-12-6, EC 500-151-7

APPLICATIONS

Agnique CSO 40 & 20 serves as a general-purpose nonionic emulsifier system for formulations containing water-insoluble active ingredients and organic carrier phases.
Agnique CSO 40 & 20 reduces interfacial tension between oil and water, thereby facilitating the formation of finely divided emulsions.
Agnique CSO 40 & 20 supports uniform distribution of hydrophobic ingredients after concentrated formulations are diluted with water.
Agnique CSO 40 & 20 enables formulators to select different hydrophilic characteristics while retaining the same castor-oil ethoxylate chemical family.

Agnique CSO 40 & 20 functions as an emulsifier pair in emulsifiable-concentrate formulations designed to produce oil-in-water emulsions during spray dilution.
Agnique CSO 40 & 20 promotes spontaneous or agitation-assisted dispersion of pesticide-containing solvent phases throughout the aqueous carrier.
Agnique CSO 40 & 20 contributes to smaller and more consistent droplets when the solvent, active ingredient, and co-emulsifier package are properly balanced.
Agnique CSO 40 & 20 supports dilution stability across validated water qualities, temperatures, concentrations, and mixing conditions.

Agnique CSO 40 & 20 finds application in emulsion-in-water formulations containing an organic internal phase dispersed throughout a continuous aqueous phase.
Agnique CSO 40 & 20 stabilizes liquid–liquid interfaces and helps limit droplet coalescence during manufacturing and storage.
Agnique CSO 40 & 20 supports water-containing product designs that reduce dependence on rapidly evaporating organic carriers.
Agnique CSO 40 & 20 contributes to controlled droplet size, pourability, dilution performance, and active-ingredient uniformity.

Agnique CSO 40 & 20 serves as an interfacial stabilizer in suspo-emulsion formulations containing emulsified liquids and suspended pesticide particles.
Agnique CSO 40 & 20 promotes compatibility among organic droplets, hydrophobic solids, water, and formulation auxiliaries.
Agnique CSO 40 & 20 helps reduce uncontrolled aggregation when combined with suitable polymeric or anionic dispersants.
Agnique CSO 40 & 20 contributes to homogeneous dosing of active ingredients having different physical forms.

Agnique CSO 40 & 20 functions as an emulsification component in oil-dispersion formulations containing solid active ingredients suspended in a hydrophobic phase.
Agnique CSO 40 & 20 assists particle wetting before dispersants and rheology modifiers establish long-term suspension stability.
Agnique CSO 40 & 20 promotes emulsification of the oil phase when the concentrate is subsequently diluted with water.
Agnique CSO 40 & 20 helps balance particle wetting, oil compatibility, redispersibility, and spray-tank behavior.

Agnique CSO 40 & 20 supports suspension-concentrate development by improving the wetting of hydrophobic active-ingredient particles.
Agnique CSO 40 & 20 helps displace air from solid surfaces during premixing, dispersion, and milling.
Agnique CSO 40 & 20 facilitates more uniform contact between pesticide particles and the continuous liquid phase.
Agnique CSO 40 & 20 complements dedicated dispersants but does not replace the steric or electrostatic stabilization required for long-term suspension stability.

Agnique CSO 40 & 20 serves as a nonionic emulsifier in herbicide formulations containing active ingredients with limited water solubility.
Agnique CSO 40 & 20 helps transfer dissolved herbicidal ingredients from an organic concentrate into a stable diluted spray emulsion.
Agnique CSO 40 & 20 supports consistent active delivery by limiting floating oil, creaming, and rapid phase separation.
Agnique CSO 40 & 20 enables herbicide formulation development when active solubility, crop selectivity, storage stability, and regulatory suitability have been confirmed.

Agnique CSO 40 & 20 functions as an emulsification aid in insecticide and acaricide formulations containing hydrophobic active substances.
Agnique CSO 40 & 20 promotes distribution of the active-containing organic phase throughout the spray mixture.
Agnique CSO 40 & 20 contributes to consistent dosing by maintaining emulsion uniformity during agitation and application.
Agnique CSO 40 & 20 allows the emulsifier balance to be adjusted according to solvent polarity, active chemistry, and dilution ratio.

Agnique CSO 40 & 20 finds application in fungicide concentrates requiring reliable oil–water interfacial stabilization.
Agnique CSO 40 & 20 facilitates incorporation of hydrophobic fungicidal compounds into emulsifiable concentrates and related liquid systems.
Agnique CSO 40 & 20 supports dilution stability across the water temperatures and hardness levels established during formulation testing.
Agnique CSO 40 & 20 maintains active distribution while biological efficacy remains dependent on the complete registered formulation.

Agnique CSO 40 & 20 serves as a co-emulsifier with calcium dodecylbenzene sulfonate and other compatible anionic agricultural surfactants.
Agnique CSO 40 & 20 provides nonionic steric stabilization while the anionic component contributes electrostatic stabilization.
Agnique CSO 40 & 20 broadens the hydrophilic–lipophilic balance available within combined emulsifier packages.
Agnique CSO 40 & 20 enables optimization of spontaneous emulsification, droplet fineness, temperature tolerance, and hard-water performance.

Agnique CSO 40 & 20 functions in solvent systems containing fatty acid methyl esters, fatty acid dimethylamides, hydrocarbons, ketones, alcohols, and aromatic carriers.
Agnique CSO 40 & 20 connects compatible organic solvent blends with the water phase created during product dilution.
Agnique CSO 40 & 20 allows active-ingredient solvency and emulsion stability to be adjusted as separate formulation parameters.
Agnique CSO 40 & 20 supports lower-volatility formulation concepts when combined with suitable high-boiling solvents.

Agnique CSO 40 & 20 finds application in botanical pesticide formulations containing essential oils, plant extracts, or other lipophilic natural ingredients.
Agnique CSO 40 & 20 promotes dispersion of compatible botanical materials into water-containing products.
Agnique CSO 40 & 20 supports clear, opalescent, or milky formulations depending on concentration and ingredient composition.
Agnique CSO 40 & 20 requires biological, toxicological, crop-safety, and regulatory evaluation before commercial agricultural use.

Agnique CSO 40 & 20 serves as a wetting and spreading aid in compatible foliar formulations.
Agnique CSO 40 & 20 reduces surface tension and improves contact between diluted spray droplets and hydrophobic plant surfaces.
Agnique CSO 40 & 20 contributes to broader deposit distribution when used within an appropriate concentration range.
Agnique CSO 40 & 20 must be optimized to prevent excessive foam, spreading, runoff, or increased crop exposure.

Agnique CSO 40 & 20 functions as a processing surfactant in water-dispersible granules and wettable powders.
Agnique CSO 40 & 20 supports wetting of hydrophobic ingredients during kneading, extrusion, granulation, or powder dilution.
Agnique CSO 40 & 20 helps water penetrate agglomerates and release active particles into the spray suspension.
Agnique CSO 40 & 20 enables wetting performance to be balanced with binder strength, dispersibility, flow, and storage stability.

Agnique CSO 40 & 20 finds application in capsule-suspension and microencapsulation processes requiring controlled organic droplets in water.
Agnique CSO 40 & 20 supports initial emulsion formation before the capsule wall is generated around the active-containing phase.
Agnique CSO 40 & 20 contributes to control of droplet size and interfacial stability during encapsulation.
Agnique CSO 40 & 20 requires compatibility testing because surfactant concentration can influence capsule-wall formation and active release.

Agnique CSO 40 & 20 serves as an emulsifier in industrial cleaning concentrates containing oily solvents and hydrophobic soil-removal ingredients.
Agnique CSO 40 & 20 helps distribute organic cleaning components throughout water during product dilution.
Agnique CSO 40 & 20 promotes wetting of oily residues, machinery surfaces, and contaminated equipment.
Agnique CSO 40 & 20 supports detergency while foam, rinsing, substrate compatibility, and wastewater behavior remain formulation dependent.

Agnique CSO 40 & 20 functions as an emulsifier in metalworking-fluid concentrates containing mineral oils, esters, lubricity additives, and corrosion inhibitors.
Agnique CSO 40 & 20 promotes formation of oil-in-water emulsions used during cutting, grinding, drilling, and forming.
Agnique CSO 40 & 20 supports uniform lubricant delivery and cooling when the complete fluid remains physically stable.
Agnique CSO 40 & 20 requires testing for hard-water tolerance, foam, microbial stability, residue, and metal compatibility.

Agnique CSO 40 & 20 finds application in textile-processing products containing oils, lubricants, dyes, and hydrophobic finishing agents.
Agnique CSO 40 & 20 supports uniform distribution of processing oils throughout aqueous treatment baths.
Agnique CSO 40 & 20 contributes to fiber wetting and treatment consistency when compatible with salts and other auxiliaries.
Agnique CSO 40 & 20 enables development of selected scouring, dyeing, spin-finish, and finishing emulsions.

Agnique CSO 40 & 20 serves as an emulsifying auxiliary in coatings, inks, adhesives, and polymer dispersions containing mixed aqueous and organic ingredients.
Agnique CSO 40 & 20 supports incorporation of compatible resins, plasticizers, oils, pigments, and functional additives.
Agnique CSO 40 & 20 promotes substrate and pigment wetting when used at an appropriate concentration.
Agnique CSO 40 & 20 may influence gloss, water resistance, adhesion, drying, foam, and film appearance.

Agnique CSO 40 & 20 functions as a nonionic stabilizer in emulsion-polymerization and latex-processing studies.
Agnique CSO 40 & 20 supports dispersion of hydrophobic monomers and polymer particles in an aqueous continuous phase.
Agnique CSO 40 & 20 supplies steric stabilization that can complement anionic surfactants and protective colloids.
Agnique CSO 40 & 20 enables evaluation of particle-size control, coagulum formation, electrolyte tolerance, and finished-latex stability.

Agnique CSO 40 & 20 provides formulators with two ethoxylation levels for adjusting hydrophilic–lipophilic balance.
Agnique CSO 40 & 20 allows the more hydrophobic 20 EO grade to be emphasized when stronger oil-phase affinity is required.
Agnique CSO 40 & 20 allows the more hydrophilic 40 EO grade to be emphasized when greater aqueous compatibility and oil-in-water stabilization are required.
Agnique CSO 40 & 20 can be blended experimentally to optimize emulsion fineness, dilution stability, cloud behavior, and temperature performance.

DESCRIPTION

Agnique CSO 40 & 20 refers to Agnique CSO-40 and Agnique CSO-20, which are separate products rather than one premixed commercial grade.
Agnique CSO-40 is identified by product number 30531617, while Agnique CSO-20 is identified by product number 30530711.
Both grades are associated with CAS Number 61791-12-6.
The numbers 40 and 20 identify nominal average ethylene oxide addition levels rather than percentages of active material.

Agnique CSO 40 & 20 belongs to the chemical family of ethoxylated castor oils.
Agnique CSO 40 & 20 is nonionic and must not be confused with sulfated or sulfonated castor oil, also known as Turkey red oil.
Agnique CSO 40 & 20 derives hydrophobic character from the castor-oil triglyceride structure.
Agnique CSO 40 & 20 derives hydrophilic character from polyoxyethylene chains introduced through ethoxylation.

Agnique CSO 40 & 20 is a UVCB-type reaction product containing a distribution of related ethoxylated molecules.
Agnique CSO 40 & 20 cannot be represented accurately by one exact molecular formula or one fixed molecular weight.
Agnique CSO 40 & 20 may be described using the generalized formula C₅₇H₁₀₄O₉(CH₂CH₂O)n.
Agnique CSO 40 & 20 retains controlled compositional variation arising from natural castor-oil feedstock and ethoxylate-chain distribution.

Agnique CSO 40 & 20 is manufactured by reacting castor oil with ethylene oxide under controlled catalytic conditions.
Agnique CSO 40 & 20 requires careful regulation of reaction temperature, pressure, catalyst level, and residual ethylene oxide.
Agnique CSO 40 & 20 is finished through operations controlling moisture, acidity, catalyst residues, color, odor, and physical consistency.
Agnique CSO 40 & 20 is produced at different average ethoxylation levels to provide different balances of oil affinity and water compatibility.

Agnique CSO 40 & 20 contains approximately 20 EO in the lower-ethoxylated grade and approximately 40 EO in the higher-ethoxylated grade.
Agnique CSO 40 & 20 becomes progressively more hydrophilic as the average number of polyoxyethylene units increases.
Agnique CSO 40 & 20 therefore provides stronger relative oil affinity through CSO-20 and stronger relative aqueous compatibility through CSO-40.
Agnique CSO 40 & 20 should nevertheless be selected through formulation testing rather than nominal EO level alone.

Agnique CSO 40 & 20 is generally supplied as yellow liquid material.
Agnique CSO 40 & 20 is listed by as liquid at 23°C for both grades.
Agnique CSO 40 & 20 exhibits temperature-dependent viscosity, becoming easier to pump and mix as temperature increases.
Agnique CSO 40 & 20 may become cloudy, thicker, or partially congealed during cool storage without necessarily undergoing chemical degradation.

Agnique CSO 40 & 20 has a representative CSO-40 cloud point near 74°C under Method E conditions.
Agnique CSO 40 & 20 cloud-point values cannot be compared without considering the different test systems.
Agnique CSO 40 & 20 finished-formulation cloud behavior also changes with concentration, electrolyte content, solvent composition, and co-surfactants.

Agnique CSO 40 & 20 has representative viscosities near 110 mPa·s for CSO-20 and 120 mPa·s for CSO-40 when measured at 60°C.
Agnique CSO 40 & 20 historical agricultural literature reports substantially higher viscosities at 25°C, illustrating strong temperature dependence.
Agnique CSO 40 & 20 should therefore be evaluated at the actual storage, pumping, mixing, and filling temperatures.
Agnique CSO 40 & 20 should not be assigned one combined viscosity value.

Agnique CSO 40 & 20 has a representative density near 1.05 kg/L at 25°C for both grades in historical formulation literature.
Agnique CSO 40 & 20 is described as water soluble under the referenced agricultural screening criteria.
Agnique CSO 40 & 20 produces representative surface-tension values near 39 mN/m at 1 g/L in distilled water.
Agnique CSO 40 & 20 exact density, solution appearance, and surface activity should be verified against current grade-specific documents.

Agnique CSO 40 & 20 has representative flash-point values above 150°C for CSO-20 and above 200°C for CSO-40 in historical agricultural literature.
Agnique CSO 40 & 20 remains combustible despite its low ambient volatility.
Agnique CSO 40 & 20 may generate aerosol or mist during spraying, high-speed mixing, or heated transfer.
Agnique CSO 40 & 20 severe heating or combustion may produce carbon monoxide, carbon dioxide, aldehydes, and irritating organic fumes.

Agnique CSO 40 & 20 has representative low-temperature values near −16°C for CSO-20 and approximately 14°C for CSO-40 in historical agricultural data.
Agnique CSO 40 & 20 may therefore show significantly different cold-handling behavior despite belonging to the same chemical family.
Agnique CSO 40 & 20 cold or nonuniform material should be warmed gradually and homogenized only within supplier-approved limits.
Agnique CSO 40 & 20 should never be heated with open flames or uncontrolled high-temperature equipment.

Agnique CSO 40 & 20 provides renewable carbon through its castor-oil-derived hydrophobic structure.
Agnique CSO 40 & 20 also contains synthetically introduced polyoxyethylene chains and should not automatically be described as entirely bio-based.
Agnique CSO 40 & 20 regulatory acceptance varies according to jurisdiction, formulation type, concentration, and intended use.
Agnique CSO 40 & 20 current technical, safety, regulatory, and batch documentation should take priority over historical catalogue information.

PROPERTIES

Product Name: Agnique CSO 40 & 20
Commercial Interpretation: Combined reference to Agnique CSO-40 and Agnique CSO-20
Agnique CSO-40 Product Number: 30531617
Agnique CSO-20 Product Number: 30530711
Product Type: Nonionic emulsifiers and solubilizing surfactants
Chemical Family: Ethoxylated castor oils
CAS Number: 61791-12-6
EC Number: 500-151-7
Substance Type: UVCB ethoxylated natural-oil substances
Generalized Molecular Formula: C₅₇H₁₀₄O₉(CH₂CH₂O)n
Exact Molecular Weight: Not applicable
Nominal Average Molecular Weight of CSO-20: Approximately 1,814.5 g/mol by generalized calculation
Nominal Average Molecular Weight of CSO-40: Approximately 2,695.6 g/mol by generalized calculation
Ionic Character: Nonionic
Raw-Material Basis: Castor oil and ethylene oxide
Agnique CSO-20 Ethoxylation Level: Approximately 20 EO
Agnique CSO-40 Ethoxylation Level: Approximately 40 EO
Relative Hydrophilicity of CSO-20: Lower
Relative Hydrophilicity of CSO-40: Higher
Physical Form at 23°C: Liquid
Typical Appearance: Yellow liquid
Representative Active Content: Approximately 100% for both grades in historical agricultural literature
Representative Density at 25°C: Approximately 1.05 kg/L for both grades
CSO-20 Viscosity at 60°C: Approximately 110 mPa·s
CSO-40 Viscosity at 60°C: Approximately 120 mPa·s
Historical CSO-20 Viscosity at 25°C: Approximately 750 mPa·s
Historical CSO-40 Viscosity at 25°C: Approximately 1,300 mPa·s
CSO-20 Cloud Point: Approximately 66°C, Method D
CSO-40 Cloud Point: Approximately 74°C, Method E
Historical CSO-20 HLB Value: Approximately 10
Historical CSO-40 HLB Value: Approximately 13.1
Water Behavior: Soluble according to referenced agricultural literature
Representative CSO-20 Surface Tension: Approximately 39 mN/m at 1 g/L
Representative CSO-40 Surface Tension: Approximately 39 mN/m at 1 g/L
Representative CSO-20 Flash Point: Greater than 150°C
Representative CSO-40 Flash Point: Greater than 200°C
Representative CSO-20 Freezing Point: Approximately −16°C
Representative CSO-40 Freezing Point: Approximately 14°C
Primary Function: Oil-in-water emulsification
Additional Functions: Solubilization, wetting, spreading, particle-wetting support, compatibility improvement, and interfacial stabilization
Primary Agricultural Formulation Types for CSO-20: EC, EW, and OD
Primary Agricultural Formulation Types for CSO-40: EC and EW
Additional Potential Formulation Types: SE, SC, CS, WP, WDG, cleaning concentrates, metalworking emulsions, coatings, and latex systems
Volatility: Low under normal ambient conditions
Combustibility: Combustible organic surfactant materials
Chemical Stability: Stable under recommended handling and storage conditions
Hazardous Polymerization: Not expected under normal storage conditions
Incompatible Materials: Strong oxidizing agents and other materials identified in the current regional Safety Data Sheets
Hazard Classification: Grade- and region-specific; consult the current Safety Data Sheets
Transport Classification: Grade- and region-specific; consult the current Safety Data Sheets
Recommended Storage: Original tightly closed containers in a cool, dry, and well-ventilated location
Current Data Requirement: Confirm all values against the latest grade-specific Technical Data Sheets, Safety Data Sheets, and certificates of analysis.

FIRST AID

Inhalation:
Move the affected person to fresh air.
Keep the person at rest in a position comfortable for breathing.
Avoid further exposure to Agnique CSO 40 & 20 aerosol, mist, vapor, or thermal-decomposition fumes.
Obtain medical attention if coughing, headache, nausea, dizziness, throat irritation, or breathing discomfort develops or persists.

Skin Contact:
Remove contaminated clothing and footwear.
Wash the affected skin thoroughly with soap and plenty of water.
Continue rinsing if redness, irritation, or discomfort is present.
Obtain medical advice if symptoms persist or extensive exposure has occurred.
Wash contaminated clothing thoroughly before reuse.

Eye Contact:
Rinse the eyes immediately with plenty of clean, gently flowing water.
Hold the eyelids open to ensure complete irrigation.
Remove contact lenses when present and easy to do, then continue rinsing.
Continue rinsing for at least several minutes.
Obtain medical attention if pain, redness, tearing, blurred vision, or irritation persists.

Ingestion:
Rinse the mouth thoroughly with water.
Do not induce vomiting unless directed by qualified medical personnel.
Never give anything by mouth to an unconscious or convulsing person.
Obtain medical advice if a significant quantity has been swallowed or symptoms develop.
Provide the relevant Agnique CSO-40 or Agnique CSO-20 Safety Data Sheet to medical personnel.

Note to Physicians:
No product-specific antidote should be assumed.
Provide supportive care and treat according to the patient’s symptoms and clinical condition.
Assess the respiratory tract, eyes, skin, and gastrointestinal system following significant exposure.
Consider all active ingredients, solvents, and additional components when exposure involved a finished formulation.
Use the current regional grade-specific Safety Data Sheet as the primary medical reference.

HANDLING AND STORAGE

Handling:
Handle Agnique CSO 40 & 20 in accordance with good industrial hygiene and chemical safety practices.
Review the current grade-specific Technical Data Sheet and Safety Data Sheet before opening or processing either product.
Avoid unnecessary contact with the skin, eyes, and clothing.
Do not breathe aerosol, mist, vapor, or fumes generated during heating, spraying, or high-speed mixing.
Use closed or low-splash transfer systems wherever reasonably practicable.
Use clean, dry, and chemically compatible equipment for pumping, weighing, sampling, and transfer.
Control agitation to obtain uniform mixing without generating unnecessary foam.
Wash the hands, face, and exposed skin thoroughly after handling.
Do not eat, drink, or smoke in areas where Agnique CSO 40 & 20 is processed.
Keep containers tightly closed when the products are not being sampled or transferred.

Ventilation:
Provide adequate general ventilation in storage and processing areas.
Use local exhaust ventilation at heated vessels, mixers, drum openings, filling points, and sampling stations.
Control aerosols and vapors at their source rather than allowing them to spread throughout the workplace.
Provide additional ventilation when Agnique CSO 40 & 20 is heated, sprayed, atomized, or handled in confined spaces.
Use suitable respiratory protection when engineering controls cannot adequately limit exposure.
Select respiratory equipment through a documented workplace exposure assessment.
Ensure that ventilation and exhaust systems comply with occupational and environmental requirements.

Storage:
Store Agnique CSO 40 & 20 in separate original, tightly closed, and correctly labeled containers.
Keep both grades in a cool, dry, and well-ventilated location.
Protect Agnique CSO 40 & 20 from direct sunlight, excessive heat, uncontrolled freezing, moisture, contamination, and physical damage.
Keep Agnique CSO 40 & 20 separated from strong oxidizing agents and incompatible chemicals.
Prevent water, dirt, active ingredients, acids, bases, and other contaminants from entering opened containers.
Carefully reseal partially used containers immediately after sampling or transfer.
Maintain the grade-specific storage-temperature limits specified.
Allow cold, cloudy, or congealed material to warm gradually before pumping or use.
Homogenize reconditioned material before sampling or formulation.
Use first-in, first-out stock rotation within the applicable shelf life.

Spill and Leak Procedures:
Restrict access to the affected area and remove unnecessary personnel.
Provide effective ventilation before beginning spill recovery.
Wear suitable gloves, protective clothing, eye protection, and respiratory protection as required.
Stop the source of the leak only when this can be done safely.
Prevent Agnique CSO 40 & 20 from entering drains, sewers, soil, groundwater, or surface water.
Recover pumpable liquid into suitable labeled containers whenever practicable.
Contain remaining material with sand, earth, vermiculite, or another compatible inert absorbent.
Collect recovered product and contaminated absorbent in tightly closed and correctly labeled waste containers.
Clean the affected surface thoroughly because residual surfactant can create a severe slipping hazard.
Prevent contaminated wash water from entering uncontrolled drainage systems.
Dispose of recovered material and cleaning residues through an authorized waste-management contractor.

Handling Precautions:
Wear chemical-resistant gloves selected from documented compatibility and permeation data.
Use safety glasses with side protection or tightly fitting chemical goggles.
Wear a face shield in addition to goggles where splashing is reasonably foreseeable.
Use protective clothing and footwear capable of limiting repeated skin contact.
Provide accessible eyewash and emergency-shower equipment near major handling areas.
Inspect pumps, hoses, valves, seals, gaskets, tanks, and heated transfer lines before use.
Use equipment capable of handling the temperature-dependent viscosities of both grades.
Avoid uncontrolled high-speed mixing that may generate excessive foam or airborne mist.
Warm cold or congealed product only by controlled indirect heating within approved limits.
Never use open flames or uncontrolled direct heating to restore fluidity.
Review the current Agnique CSO-40 and Agnique CSO-20 Technical Data Sheets, Safety Data Sheets, certificates of analysis, and applicable regulatory requirements before formulation, production, transport, storage, cleanup, or disposal.