PRODUCTS

GENAMIN KDMP

CAS: 68607-24-9
67-63-0

Chemical nature: Behenyl trimethyl ammonium chloride (contains 19% isopropanol)
Chemical Name: Behentrimonium Chloride
Product Function: Hair Conditioning Agent
Chemical Type: Quaternary Ammonium Compounds
Applications: Hair Conditioner

Performance Claims:
Conditioning
Hair volumizing
Hair smoothing

Genamin KDMP by Clariant is a behenyl trimethyl ammonium chloride.
GENAMIN KDMP acts as cationic surfactant and conditioning agent.
GENAMIN KDMP offers good antistatic effect, good softening effect, good wet combing and boosts volume.
Genamin KDMP is used in hair conditioner.

Genamin KDMP is a cationic surfactant that is mainly used in cream-type hair conditioners and hair replenishing treatments.
The concentration required depends on the hair.
The more damaged the hair is, the more Genamin KDMP will be used to achieve best effect.

Genamin KDMP is a cationic surfactant that is mainly used in cream-type hair conditioners and hair replenishing treatments.

GENAMIN KDMP is a cationic surfactant, which is mainly used in cream-type hair conditioners, hair supplements and hair filling products.
The required concentration depends on the quality of the hair.
GENAMIN KDMP has mild bactericidal properties.

Genamine KDMP is a cationic surfactant most commonly used in hair care products.
The component is concentrated on the surface of the hair along with film-forming, nutritional, vitamin and other additives, contributing to the deep penetration of these substances.
By reducing surface resistance, GENAMIN KDMP makes hair more manageable and prevents hair from flying apart after combing.

It is allowed to inject Genamin KDMP together with other cationic surfactants to achieve a mild effect.
GENAMIN KDMP is also compatible with non-ionic surfactants.
Compatibility studies have shown good results in combination with most film-forming components, which allows you to create smoothing shampoos and balms with a laminating effect.

Cosmetic properties

• Removes static stress;
• Improves combability;
• Promotes the absorption of nutrients into the hair;
• Softens coarse and unruly hair;
• Eliminates damage and split ends.
Scope of application

Genamin KDMP is recommended to be added to additional hair care products, in addition to shampoos:

• Air conditioners;
• Means for lamination;
• Balms for hair damaged by dyeing and perm;
• Styling gels;
• Leave-in and rinse-off lotions and sprays;
• Fixatives for permanent waving.

applications

The component has high stability in a wide pH range, including in alkaline media.
It is recommended to introduce GENAMIN KDMP into the fatty or aqueous phase.

Features of introduction into the aqueous phase: first, the aqueous part, hydrophobic emulsifier, thickener are mixed, and the necessary oils are melted at a temperature of 75 to 80⁰С.
Genamin KDMP is dissolved with stirring in the aqueous phase at a temperature of about 75°C, and this phase is introduced into the fatty phase with stirring.
When the emulsion cools down to 35⁰С, you can add fragrances and actives.

Features of introduction into the fatty phase: Genamin KDMP melts together with oils, hydrophilic emulsifiers and thickeners.
The separately heated aqueous phase is introduced into the oil phase.

The input rate is 0.5-2% of the volume of the active substance, and not of the volume of the final product.
The more damage to the hair, the more the component is required.

Benefits
-Easy to handle pellet form
-Excellent antistatic properties
-Good softening effect
-Good wet combing
-Giving volume and body to the hair
-Excellent silkening/smoothing effect
-Excellent dry combability

Product properties
Appearance (20 °C): Pellets
Odour: characteristic
Chemical and physical data:
Active substance: 77.0 – 83.0 %
Water max.: 3.0%
Isopropanol approx.: 18 %
Iodine colour number (KDMP:Isopropanol:water = 50:40:10 %): max. 5
pH-value (1 % a.i. in water): 5.0 - 7.0
Mean molecular weight: 400 g/mol
Free amine + amine hydrochloride: max. 2.0%
Mean molecular weight free amine: 350 g/mol
Mean molecular weight amine hydrochloride: 386 g/mol
Surface tension (5 g/L) (20 °C): 42.2 mN/m

Uses
Genamin KDMP is used mainly in cream-type hair conditioners and hair replenishing treatments.
GENAMIN KDMP is also suitable for skin care preparations.
The concentration required depends on the hair.
The more damaged the hair is the more Genamin KDMP will be used to achieve best effects, starting at about 0.5% up to 2.0%, relative to the active substance.
Other possible applications are in the manufacture of antistatic fixatives for permanent waving, hair lotions, shampoos and styling creams.

Applications
As a cationic surfactant, Genamin KDMP is adsorbed onto negatively charged surfaces without leaving a visible film, for example on the hair.
Because of this and its associated properties, Genamin KDMP is especially suitable as an active ingredient for hair cosmetics.
Genamin KDMP offers a superb softening effect for thick and hard to manage hair.
The antistatic effect of Genamin KDMP is also noteworthy.

Application properties
Genamin KDMP is adsorbed onto the hair from aqueous and alcoholic solutions as well as from emulsions (dispersions) also in combination with other additives, such as film-forming agents and fatty components, and, because of the reduction in surface resistance, it prevents the hair flying after combing.
Hair damaged by bleaching, permanent waving or excessive degreasing tends to mat.
Genamin KDMP, used in cream after-treatment preparations, considerably improves the wet combing properties and greatly improves the condition of the hair.

Compatibility
Genamin KDMP can be used in combination with other cationic surfactants to allow special effects with regards to wet and dry combing properties and the feel of the shampooed hair.
Genamin KDMP is compatible with non-ionic surfactants.
GENAMIN KDMP reacts with anionic surfactants by forming electroneutral salts; most of these are only sparingly soluble in water but stable solutions can be obtained by using an excess of an anionic compound.
No signs of incompatibility were observed with mixtures consisting of Genamin KDMP and commercial film-forming agents such as polyvinyl pyrrolidone, PVA and PVP/VA.

pH stability
As a quaternary ammonium salt Genamin KDMP possesses excellent stability over a wide pH range.
GENAMIN KDMP differs from tertiary amines in that the cation persists also in alkaline medium.

Solubility
Genamin KDMP is soluble in warm water but after cooling down Genamin KDMP precipitates.

Processing instructions
Genamin KDMP can be incorporated to both, the aqueous or the oil phase.
Introducing Genamin KDMP via the aqueous phase:
A hydrophobic emulsifier, e.g. Plantasens Emulsifier DGI (INCI: Polyglyceryl- 2 Sesquiisostearate), the consistency modifier and any oils used are melted at 75–80°C.
Genamin KDMP is dispersed in the aqueous phase while stirring andheating to approx. 75 °C.
Than the heated water phase is added to the melted oil phase while stirring.
Active substances and perfume oils should be added only after the mixture has cooled down to about 35°C.
Introducing Genamin® KDMP via the oil phase:
Genamin KDMP is melted together at 75 – 80°C with a hydrophilic emulsifier, e.g. Hostaphat KL 340 D (INCI: Trilaureth-4 Phosphate), the consistency modifier and any oils used.
The aqueous phase is heated separately to the same temperature and added while stirring the melted quat/consistency modifier/oil phase.
Active substances and perfume oils should be added only after the mixture has cooled down to about 35°C.

Genamin KDMP by Clariant is a behenyl trimethyl ammonium chloride.
Acts as cationic surfactant and conditioning agent.
Offers good antistatic effect, good softening effect, good wet combing and boosts volume.
Genamin KDMP is used in hair conditioner.

Storage instructions
Usual protection measurements are necessary because of the isopropanol included.
The product must be protected from direct sunlight and temperatures above 40 °C during storage.
IPA may diffuse out of the pellets during storage time with inhomogeneous sampling - different analytical results as a consequence.
Further information on handling, storage and dispatch is given in the EC safety data sheet.

SYNONYMS:

Octadecyl-behenyl trimethyl ammonium chloride

68607-24-9

docosyl-dimethyl-nonadecylazanium;chloride

SCHEMBL22436441

isopropanol

Isopropyl alcohol

2-Propanol

Propan-2-ol

67-63-0

2-Hydroxypropane

Alkolave

Avantine

Hartosol

Dimethylcarbinol

sec-Propyl alcohol

i-Propanol

Petrohol

Takineocol

Alcojel

Avantin

1-Methylethanol

2-Propyl alcohol

Alcolo

Isohol

Lavacol

Lutosol

Propol

Alcosolve 2

1-Methylethyl alcohol

Imsol A

Arquad DMCB

Alcosolve

Spectrar

i-Propylalkohol

n-Propan-2-ol

Combi-schutz

i-Propyl alcohol

Isopropyl alcohol, rubbing

ISO-PROPANOL

Iso-propylalkohol

Alcool isopropilico

Visco 1152

Alcool isopropylique

Sterisol hand disinfectant

i-Propanol [German]

sec-Propanol

i-Propylalkohol [German]

Iso-propyl alcohol

Iso-propylalkohol [German]

Alcool isopropilico [Italian]

Alcool isopropylique [French]

FEMA No. 2929

iso-propylalcohol

propanol-2

UNII-ND2M416302

Isopropyl alcohol [USP]

MFCD00011674

CHEBI:17824

ND2M416302

NSC-135801

2-Propanol, anhydrous

NCGC00090917-01

Rubbing alcohol

DSSTox_CID_762

Isopropyl alcohol (USP)

iPrOH

DSSTox_RID_75777

DSSTox_GSID_20762

2-Propanol, USP, 99.0%

Caswell No. 507

isopropylalcohol

ISOPROPYL ALCOHOL(2-D)

FEMA Number 2929

2-Propanol, ACS reagent, >=99.5%

CAS-67-63-0

CCRIS 2308

HSDB 116

EINECS 200-661-7

UN1219

ISOPROPYL ALCOHOL(1,1,1,3,3,3-D6)

NSC 135801

BRN 0635639

ISOPROPYL ALCOHOL(1,1,1,2,3,3,3-D7)

isoproylalcohol

Virahol

i-propylalcohol

Lavaco

Isopropylalkohol

2propanol

2-propylalcohol

isopropy alcohol

isoproyl alcohol

AI3-01636

2-propanolum

Alcohol,isopropyl

Isopropyl-alcohol

propane-2ol

propan-2ol

2-propano

Isopropryl alcohol

propane-2-ol

2 -propanol

2- propanol

propan 2-ol

iso-PrOH

Isopropyl Alcohol

i-PrOH

(propan-2-ol)

Isopro (TN)

Recovered Isopropanol

Tissue Dry Dehydrant

Isopropyl Alcohol C+

Hibistat (Salt/Mix)

i-Pr-OH

Propane, 2-hydroxy-

2-Propanol, Ph Eur

iso-C3H7OH

Isopropanol (JP17)

Isopropanol (Recovered)

Isopropanol ACS reagent

2-Propanol, GC Grade

2-Propanol, for HPLC

Isopropyl Alcohol - GMP

2-Propanol, ACS reagent

2-Propanol, HPLC Grade

CHEMBL582

Isopropyl alcohol HPLC/UV

2-Propanol, 99.5%

EC 200-661-7

IPS 1

Isopropanol, 70% in water

Isopropanol, 70% in H2O

4-01-00-01461 (Beilstein Handbook Reference)

Isopropyl alcohol (manufacture strong-acid process)

Isopropanol, Isopropyl Alcohol

Isopropanol, 99.5% anhydrous

WLN: QY1&1

2-Propanol, analytical standard

Isopropanol or isopropyl alcohol

2-Propanol, LR, >=99%

DTXSID7020762

BDBM36154

Isopropyl alcohol (manufacturing-strong acid process only)

2-Propanol, anhydrous, 99.5%

ZINC901159

2-Propanol, AR, >=99.5%

AMY11029

STR00089

2-Propanol, 99.9%, PRA grade

2-Propanol, for HPLC, 99.5%

2-Propanol, for HPLC, 99.9%

2-Propanol, technical grade, 95%

Isopropyl Alcohol Reagent Grade ACS

Tox21_111039

Tox21_202475

2-Propanol, 99.5%, HPLC grade

2-Propanol, Spectrophotometric Grade

NSC135801

2-Propanol, histological grade, 99%

AKOS000121012

2-Propanol, for HPLC, >=99.8%

DB02325

MCULE-6646752234

UN 1219

NCGC00260024-01

2-Propanol, 99.95% (LC-MS Grade)

2-Propanol, UV HPLC gradient, 99.8%

Isopropyl alcohol (only persons who manufacture by the strong acid process are subject, supplier notification not required)

Isopropyl alcohol, natural, >=98%, FG

Phenolphthalein Solution, Alcoholic 0.5%

2-Propanol 100 microg/mL in Acetonitrile

Isopropyl alcohol, >=99.7%, FCC, FG

2-Propanol, SAJ first grade, >=99.0%

2-Propanol, JIS special grade, >=99.5%

2-Propanol, Laboratory Reagent, >=99.5%

2-Propanol, meets USP testing specifications

FT-0613371

FT-0670483

I0163

I0164

I0277

Isopropanol, 99.5% anhydrous, 50 ppm water

C01845

D00137

Q16392

SR-01000944474

J-510285

SR-01000944474-1

2-Propanol, ACS spectrophotometric grade, >=99.5%

2-Propanol, p.a., ACS reagent, reag. ISO, 99.8%

2-Propanol, reag. ISO, UV HPLC spectroscopic, 99.7%

2-Propanol, BioReagent, for molecular biology, >=99.5%

2-Propanol, electronic grade, 99.999% trace metals basis

2-Propanol, puriss. p.a., ACS reagent, >=99.8% (GC)

2-Propanol, Vetec(TM) reagent grade, anhydrous, >=99.5%

2-Propanol, BioUltra, for molecular biology, >=99.5% (GC)

Isopropanol or isopropyl alcohol [UN1219] [Flammable liquid]

Isopropyl alcohol, EuropePharmacopoeia (EP) Reference Standard

Isopropyl alcohol, meets EP, BP, USP testing specifications

2-Propanol, >=99.7%, suitable for absorption spectrum analysis

2-Propanol, semiconductor grade PURANAL(TM) (Honeywell 17829)

2-Propanol, United States Pharmacopeia (USP) Reference Standard

2-Propanol, >=99.7%, for residue analysis, suitable for 1000 per JIS

2-Propanol, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%

2-Propanol, Pharmaceutical Secondary Standard; Certified Reference Material

2-Propanol, semiconductor grade MOS PURANAL(TM) (Honeywell 17930)

2-Propanol, semiconductor grade SLSI PURANAL(TM) (Honeywell 17030)

2-Propanol, semiconductor grade ULSI PURANAL(TM) (Honeywell 17022)

2-Propanol, semiconductor grade VLSI PURANAL(TM) (Honeywell 17604)

2-Propanol, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%, poly coated bottles

2-Propanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., >=99.8% (GC)

2-Propanol, puriss., meets analytical specification of Ph. Eur., BP, USP, >=99.5% (GC)

8003-15-4