Quick Search

PRODUCTS

HOSTAFINE BLUE B2G

Cu phthalocyanine. 
Is a pigment dispersion of approx. 
40% pigment based on nonionic dispersing and wetting agents as well as on glycol. 

The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. 
Suitable for wood stains.

Hostafine Blue B2G is a pigment dispersion of approx. 
40% pigment and is based on nonionic dispersing and wetting agents and glycol. 

The Colour Index of the basic pigment is Pigment Blue 15:3. 
The extremly low particle size distribution gives very good gloss, transparency and sedimentation properties in aqueous systems. 
Suitable for stationery, woodstains, latex, viscose fibres, detergents.

Hostafine pigment preparations are especially suitable for water-based transparent wood stains. 
They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. 
A final evaluation in the customer system is necessary.

Hostafine pigment formulations are particularly suitable for waterborne clear wood stains. 

Hostafine Blue B2G is Cu Phthalocyanine, ß-Mod. 
Used in air-drying alkyds, physically drying paints, baking enamels, acid cured paints, amine cured epoxies, isocyanate cured paints and waterbased paints. 
Hostafine Blue B2G is a greenish blue pigment stable to aromatic solvents with outstanding fastness.

Benefits of Hostafine Blue B2G:
Ultra finely dispersed pigment preparations
High tinting strength and brilliance
Outstanding transparency
Superior fastness properties compared to dyes
Easy-to-handle liquid pigment preparation
Highly consistent quality
Low viscosity and very good sedimentation behaviour
Preparation of Ultrafinely Dispersed Pig Pigments
High tinting strength and brightness
Excellent transparency
Excellent fastness properties compared to dyes

First aid measures of Hostafine Blue B2G:

General information:
Seek medical assistance if discomfort continues

After inhalation of Hostafine Blue B2G:
Remove the casualty into fresh air and keep him calm.

After contact with skin of Hostafine Blue B2G:
In case of contact with skin, clean with soap and water.

After contact with eyes of Hostafine Blue B2G:
Rinse the affected eye with plenty of water, at the same time keep the unaffected eye well protected.

After ingestion of Hostafine Blue B2G:
If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

Most important symptoms and effects, both acute and delayed:

Symptoms of Hostafine Blue B2G:
No symptoms known currently.

Hazards of Hostafine Blue B2G:
No special measures needed.

Indication of any immediate medical attention and special treatment needed:

Treatment:
Treat symptomatically. 

Firefighting measures of Hostafine Blue B2G:

Suitable extinguishing media of Hostafine Blue B2G:
water spray jet
foam 

Extinguishing media that must not be used for safety reasons:
Full water jet
carbon dioxide
dry powder

Special hazards arising from the substance or mixture:
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Carbon dioxide (CO2)
Nitrogen oxides (NOx)

Advice for firefighters of Hostafine Blue B2G:

Special protective equipment for firefighting:
Use self-contained breathing apparatus 

Accidental release measures of Hostafine Blue B2G:

Personal precautions, protective equipment and emergency procedures:
Wear suitable personal protective equipment.
Avoid dust formation.
Keep away sources of ignition.

Environmental precautions of Hostafine Blue B2G:
Do not allow entry to drains,water courses or soil

Methods and material for containment and cleaning up:
Avoid dust formation and electrical charging (sparking) because dust explosion might occur.
Damp spilled material with water and pick up mechanically. 
Transfer warning labels from original containers to containers where the material is collected.
When picked up, treat material as prescribed under heading "Disposal".

Reference to other sections:

Additional information of Hostafine Blue B2G:
Keep away sources of ignition, stop running engines, no smoking.
Moisten spilled material with water, cover with wet sand or wetted binder, then take up. 

Handling and storage of Hostafine Blue B2G:

Precautions for safe handling of Hostafine Blue B2G:

Advice on safe handling of Hostafine Blue B2G:
When used and handled appropriately no special measures are needed
Avoid dust formation. 

Advice on protection against fire and explosion:
Take precautionary measures against electrostatic charges - earthing necessary during loading operations.
Keep away from sources of ignition
Dust can form an explosive mixture with air.

Dust explosion class - ST1 Capable of dust explosion:

Conditions for safe storage, including any incompatibilities:

Requirements for storage areas and containers:
Keep in original packaging, tightly closed

Advice on storage compatibility:
When used and handled as intended, none.
Do not store or transport together with foodstuffs

Further information on storage conditions:
Keep container dry

Storage stability of Hostafine Blue B2G:
If correctly stored: storage life > 12 months

Specific end use(s) of Hostafine Blue B2G:
No further recommendations. 

Physical and chemical properties of Hostafine Blue B2G:

Information on basic physical and chemical properties:
Physical state: solid
Form: Powder
Colour: blue
Odour: not specified
Odour threshold: not available
pH value: not reasonable
Melting point (decomposition): not determined
Boiling point (decomposition): not determined
Flash point: Not applicable
Evaporation rate: Not applicable
Flammability
Lower explosion limit: not tested.
Upper explosive limit: not tested.
Combustion number: BZ2 Short flaring up without spreading Method - VDI 2263, ESCIS, Vol. 1
Minimum ignition energy: > 10 mJ
Vapour pressure: not available
Vapour density relative to air: not available
Relative Density: not available
Solubility in water: (20 °C) insoluble
Octanol/water partition coefficient (log Pow): Not applicable
Ignition temperature: not tested.
Self-ignition temperature: > 210 °C Method - VDI 2263 (Grewer)
Thermal decomposition: > 350 °C (Heating rate : 3 K/min) Method - DTA exothermic
Viscosity (dynamic): Not applicable
Viscosity (kinematic): Not applicable
Explosive properties: Explosive according to EU supply regulations : no data
Oxidizing properties: not tested.

Other information of Hostafine Blue B2G:
Density: 1,46 g/cm3 (20 °C)
Bulk density: 635 g/l (20 °C)
Impact sensitivity: Not impact-sensitive

  • Share !
E-NEWSLETTER