Quick Search
DESCRIPTION:
Locron S is an antiperspirant agent for the cosmetic industry.
Locron S may be used to generate aqueous solutions of aluminum chlorohydrate.
Locron S can also be incorporated in skin lotions, skin creams, and shaving lotions to achieve a slight astringent effect.
CAS: 1327-41-9;101707-17-9;11097-68-0;114442-10-3
EINECS 215-477-2
Polyaluminium Chloride
Molecular Formula: AlClHO
Synonyms
PAC,PALC,OCAL,E 200,Hydral,Locron,Gelsica,ACH 331,Paho 2S,ACH 325,Sansudor,Locron S,Locron P,HPB 5025,PAC 250A,Astringen,Kempac 20,PAC 250AD,ACH 7-321,PACK 300M,Kempac 10,Aloxicoll,PAC (salt),Hydrofugal,Nalco 8676,Chlorhydrol,Cawood 5025,Oulupac 180,Cartafix LA,Astringen 10
Aluminol ACH,Aquarhone 18,Hessidrex WT,Berukotan AC-P,Banoltan White,Kemwater PAX 14,UNII-HPN8MZW13M,[AL2(OH)nCL6-n]m,Wickenol cps 325,E 200,(coagulant),aluminum trichlorideAluminum oxychloride,Polyaluminum chloride,Aluminum chlorohydrol,Chlorhydrol Micro-Dry,Aluminum chlorhydrate,Polyaluminium Chloride,ALUMINIUM POLYCHLORIDE,Aluminum chlorohydrate,aluminiumchlorohydrate,ALUMINUM CHLOROHYDRATE,Basic,aluminum chloride,Aluminum chloride oxide,Aluminum chlorhydroxide,Aluminum hydroxychloride,Aluminum chlorohydroxide,Aluminum chloride, basic,Chlorhydrol Micro-Dry SUF,PolyaluminiumChloride(Pac),Aluminum chloride hydroxide,Aluminum hydroxide chloride,Polybasic aluminum chloride,polyaluminumhydroxychloride
Poly-Aluminium Chloride(PAC),ALUMINUM POLYHYDROXYCHLORIDES,Basic,aluminum chloride, hydrate,Dialuminium-chlorid-pentahydroxid,Aluminum chlorohydrate (anhydrous),Aluminum chloride hydroxide oxide, basic
Aluminum Chlorohydrate. Locron® S is an anhydrous antiperspirant active as a long-term perspiration-regulating agent.
Used in creams, lotions, aftershave formulations, antiperspirant and deodorants.
Locron® S offers low iron qualities for reduced yellowing.
Poly aluminum chloride is a water purification material, inorganic polymer coagulant, also referred to as Poly aluminum, abbreviated as PAC, an inorganic polymer water treatment agent having a relatively large molecular weight and a relatively high charge is produced due to bridging action of hydroxide ions and polymerization of polyvalent anions. In the form can be divided into two kinds of solid and liquid.
Solid according to different colors are divided into Tan, beige, golden yellow and white, liquid can appear as colorless transparent, yellowish, light yellow to yellow brown.
Different colors of Poly aluminum chloride in the application and production technology are also quite different.
Poly aluminum chloride is an inorganic polymer coagulant, also referred to as Poly aluminum, abbreviated as PAC, an inorganic polymer water treatment agent having a relatively large molecular weight and a relatively high charge is produced due to bridging action of hydroxide ions and polymerization of polyvalent anions.
In the form can be divided into two kinds of solid and liquid, and solid according to different colors are divided into brown, yellow and white, different colors of Poly aluminum chloride in the application and production technology are also quite different.
White polymeric aluminum chloride is also known as a polymer coagulant.
Is by aluminum hydroxide powder and high purity hydrochloric acid by spray drying processing of a white or milky white milk powder like fine powder, exposed in the air is very easy to melt. White polyaluminum chloride has replaced aluminum sulfate as a neutral sizing precipitant in the paper industry.
USES OF LOCRON S
urban water supply and drainage purification: river water, reservoir water, groundwater.
Industrial water purification.
municipal wastewater treatment.
the recovery of useful substances in industrial waste water and waste residue, the promotion of coal dust sedimentation in coal washing wastewater, and the recovery of starch in starch manufacturing industry.
various industrial wastewater treatment: printing and dyeing wastewater, leather wastewater, fluoride wastewater, heavy metal wastewater, oily wastewater, paper wastewater, coal washing wastewater, mine wastewater, brewing wastewater, metallurgical wastewater, meat processing wastewater, sewage treatment.
paper sizing.
refined sugar solution.
casting molding.
fabric anti-wrinkle.
catalyst support.
pharmaceutical refining
rapid setting of cement.
cosmetic raw materials
METHOD OF USE
The solid product is dissolved into liquid by adding water at 1:3, and then diluted with 10-30 times of clear water to the required concentration before use.
The optimal pH value is 3.5-5.0, and the maximum benefit of coagulation can be obtained by selecting the optimal pH value.
The dosage can be determined according to the different turbidity of raw water, the best dosage, the general raw water turbidity in 100-500mg/L, the dosage of 10-20kg per thousand tons.
When the turbidity of raw water is high, the dosage is appropriately increased, and when the turbidity is low, the dosage can be appropriately decreased.
for use in rural areas, the medicament can be put into a water tank, stirred evenly, and allowed to stand.
The supernatant can be used, and about 1g of the medicament is added per 50kg. I
f this medicine is used in combination with the high molecular flocculant produced by the company, the effect will be better.
Dosing can be the company's production of anionic polyacrylamide or cationic polyacrylamide with PAC dissolved into a composite flocculant after use or the PAC is added to the treated water to form aggregates, after the addition of the company's production of anionic polyacrylamide adsorption bridging into large flocs.
The dosage of Poly aluminum chloride in different water quality:
1. In low turbidity water, dilute the solid polyaluminum chloride product with tap water at a ratio of 1:3 (weight ratio) and stir until completely dissolved
Second, in the life, production of sewage, with reference to each ton of sewage to add about 30g of polymeric aluminum chloride products.
Then add the diluted polyacrylamide product, (if the effect is not obvious, please reduce or increase the dosage of the product as appropriate.)
Third, in the paper mill sewage treatment, the proportion of low turbidity water is used, if the effect is not obvious, it can be added at discretion.
Four, the raw water turbidity in 100-500mg/L, the dosage of 5-10mg per thousand tons of water dosage of 5-10kg, before use is best according to the water quality characteristics of small test, select the best value, and then put into use.
PHYSICO-CHEMICAL PROPERTIES
Molecular Formula AlClHO
Molar Mass 79.44
Water Solubility soluble H2O, forms slightly turbid colloidal solution [MER06]
Appearance Solid
Storage Condition Room Temprature
Stability Stable. Incompatible with many metals.
Physical and Chemical Properties Colorless or yellow resinous solid. Its solution is colorless or yellow-brown transparent liquid, sometimes containing impurities and gray-black mucus.
Use Poly aluminum can remove bacteria, deodorization, decolorization, fluoride, aluminum, chromium, phenol, oil, turbidity, in addition to heavy metal salts, in addition to radioactive pollutants, to purify a variety of water has a wide range of uses.
SAFETY INFORMATION ABOUT LOCRON S
First aid measures:
Description of first aid measures:
General advice:
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Move out of dangerous area:
If inhaled:
If breathed in, move person into fresh air.
If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact:
Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
Consult a physician.
In case of eye contact:
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Continue rinsing eyes during transport to hospital.
If swallowed:
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Rinse mouth with water.
Consult a physician.
Firefighting measures:
Extinguishing media:
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas
Advice for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental release measures:
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment.
Avoid breathing vapours, mist or gas.
Evacuate personnel to safe areas.
Environmental precautions:
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up:
Soak up with inert absorbent material and dispose of as hazardous waste.
Keep in suitable, closed containers for disposal.
Handling and storage:
Precautions for safe handling:
Avoid inhalation of vapour or mist.
Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Storage class (TRGS 510): 8A: Combustible, corrosive hazardous materials
Exposure controls/personal protection:
Control parameters:
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Exposure controls:
Appropriate engineering controls:
Handle in accordance with good industrial hygiene and safety practice.
Wash hands before breaks and at the end of workday.
Personal protective equipment:
Eye/face protection:
Tightly fitting safety goggles.
Faceshield (8-inch minimum).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection:
Handle with gloves.
Gloves must be inspected prior to use.
Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
Full contact:
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
It should not be construed as offering an approval for any specific use scenario.
Body Protection:
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection:
Where risk assessment shows air-purifying respirators are appropriate use a fullface respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls.
If the respirator is the sole means of protection, use a full-face supplied air respirator.
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.
Stability and reactivity:
Chemical stability:
Stable under recommended storage conditions.
Incompatible materials:
Strong oxidizing agents:
Hazardous decomposition products:
Hazardous decomposition products formed under fire conditions.
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas.
Disposal considerations:
Waste treatment methods:
Product:
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging:
Dispose of as unused product
