TEXTURE AGENT HA 105

Texture Agent HA 105 creates decorative textured effects in epoxy and epoxy/polyester hybrid powder coating systems.
Texture Agent HA 105 supports faster curing while helping the coating surface develop a controlled, structured appearance.
Texture Agent HA 105 is useful when a powder coating formulation needs both texture formation and improved curing efficiency in one additive.

Synonyms: Texture Agent HA 105, HA105, HA 105, HA105 Texture Additive, HA105 Powder Coating Texture Agent, HA105 Curing-Accelerating Texture Agent

Texture Agent HA 105 is an organic metallic complex, which can be used for producing art powder coatings.
Texture Agent HA 105 has strong curing accelerating function.
Texture Agent HA 105 acts as a texturing agent in powder coating formulations.

Texture Agent HA 105 also has a strong curing-accelerating function, helping epoxy-based systems cure more effectively.
Texture Agent HA 105 is mainly used in epoxy and epoxy/polyester hybrid powder coatings to create textured surface effects.

Recommended Dosage: 3–5% by weight of resin.

Application and Performance of Texture Agent HA 105:
Texture Agent HA 105 can be applied to pure epoxy and epoxy/polyester hybrid powder coatings.
Texture Agent HA 105 is suitable for pre-mixing with all other ingredients before extrusion.

Texture Agent HA 105 is also suitable for post-mixing with the base powder.
Moreover, the dosage of post-mixing is less than that of pre-mixing.

When producing wrinkle powder coating, please make Texture Agent HA 105 pre-mixed with other ingredients and extrude to have the base powder, and then put HA100 (Huangshan Huahui) into the base powder for thorough mixing (the dosage of HA100 is normally 0.05-0.2% by weight of base powder).
The more Texture Agent HA 105 used, the smaller wrinkle achieved, and the exact dosage shall be determined by test.

Attention should be paid to the control of extruding temperature, so as to prevent pre-crosslink.
The recommended dosage of Texture Agent HA 105 is 3-5% by weight of resin.

Texture Agent HA 105 shall be irritative to mucosa.
Please keep air fresh and ventilated when operating.
When producing special texture (such as water stripe) powder coating with Texture Agent HA 105, the suggested film thickness is more than 55μm, and baking temperature is more than 185℃.

Stability and Reactivity of Texture Agent HA 105:

Chemical stability:
Texture Agent HA 105 is stable under normal dry storage conditions.

Reactivity:
Texture Agent HA 105 may accelerate curing in epoxy-based powder coating systems.

Conditions to avoid:
Heat, moisture, dust formation, open flames, and poor ventilation should be avoided.

Incompatible materials:
Strong oxidizing agents, strong acids, and strong bases should be avoided.

Hazardous decomposition products:
Fire may produce carbon oxides, irritating smoke, and organic vapors.

Handling and Storage of Texture Agent HA 105:

Handling:
Avoid breathing dust and contact with skin or eyes.
Use in a well-ventilated area.

Storage:
Store tightly closed in a cool, dry, and ventilated place.
Keep away from heat, moisture, and ignition sources.

First Aid Measures of Texture Agent HA 105:

Inhalation:
Move to fresh air.

Skin contact:
Wash with soap and water.

Eye contact:
Rinse with water for at least 15 minutes.

Ingestion:
Rinse mouth and seek medical advice if needed.

Firefighting Measures of Texture Agent HA 105:

Suitable extinguishing media:
Use foam, dry powder, carbon dioxide, or water spray.

Special hazards:
Fire may release irritating fumes.

Protective equipment:
Wear breathing apparatus and protective clothing.

Accidental Release Measures of Texture Agent HA 105:

Personal precautions:
Avoid dust inhalation and use protective equipment.

Environmental precautions:
Prevent entry into drains and waterways.

Cleaning method:
Sweep or vacuum carefully and place into closed containers.

Exposure Controls / Personal Protection of Texture Agent HA 105:

Engineering controls:
Use ventilation.

Respiratory protection:
Wear a dust mask if needed.

Hand protection:
Wear gloves.

Eye protection:
Wear safety goggles.

Skin protection:
Wear protective clothing.

Properties of Texture Agent HA 105:
Appearance: Light yellow powder
Melting range (℃): 190-196
Solid content (%): ≥99.0